Question about 1999 Mazda B2500

Open Question

Can u show timing marks for wl turbo diesel engine

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

co7196
  • 3433 Answers

SOURCE: WL Turbo 2500cc Diesel engine oil in the water

If you have an oil cooler, It has an internal leak.

Posted on Nov 14, 2009

czaa
  • 4514 Answers

SOURCE: Please describe cylinder head

please buy a repair manual asap--or go to library sec629

Posted on Feb 14, 2011

  • 183 Answers

SOURCE: timing a wl mazda diesel engine

remove #1 spark plug.

  1. Rotate the engine so that No. 1 cylinder is at Top Dead Center (TDC) on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in the cam belt cover so that the camshaft timing can be checked without removal of the cover or any other parts. Set the crankshaft to TDC by aligning the timing mark on the crank pulley with the TDC mark on the belt cover. Look through the access hole in the belt cover to be sure that the timing mark on the cam drive sprocket is aligned with the pointer on the inner belt cover.
    NOTE

    Always turn the engine in the normal direction of rotation. Backward rotation may cause the timing belt to jump time, due to the arrangement of the belt tensioner.

  2. Drain cooling system. Remove the upper radiator hose as necessary. Remove the fan blade and water pump pulley bolts.
    CAUTION

    When draining the coolant, keep in mind that cats and dogs are attracted by ethylene glycol antifreeze, and are quite likely to drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantity. Always drain the coolant into a sealable container. Coolant should be reused unless it is contaminated or several years old.

  3. Loosen the alternator retaining bolts and remove the drive belt from the pulleys. Remove the water pump pulley.

  4. Remove the power steering pump and set it aside.

  5. Remove the 4 timing belt outer cover retaining bolts and remove the cover. Remove the crankshaft pulley and belt guide.

  6. Loosen the belt tensioner pulley assembly, then position a Camshaft Belt Adjuster tool T74P-6254-A, or equivalent, on the tension spring roll pin and retract the belt tensioner away from the timing belt. Tighten the adjustment bolt to lock the tensioner in the retracted position.

  7. If the belt is to be reused, mark the direction of rotation on the belt for installation reference.

  8. Remove the timing belt.
    79245g20.gif

    Camshaft, auxiliary shaft and crankshaft timing belt sprocket alignment mark locations-Mazda B-Series Pick-Ups 2.5L (VIN C) engines

To install:

  1. Install the new belt over the crankshaft sprocket and then counterclockwise over the auxiliary and camshaft sprockets, making sure the lugs on the belt properly engage the sprocket teeth on the pulleys. Be careful not to rotate the pulleys when installing the belt.

  2. Release the timing belt tensioner pulley, allowing the tensioner to take up the belt slack. If the spring does not have enough tension to move the roller against the belt (belt hangs loose), it might be necessary to manually push the roller against the belt and tighten the bolt.
    NOTE

    The spring cannot be used to set belt tension; a wrench must be used on the tensioner assembly.
    WARNING

    If any binding is felt when adjusting the timing belt tension by turning the crankshaft, STOP turning the engine, because the pistons may be hitting the valves.

  3. Rotate the crankshaft 2 complete turns by hand (in the normal direction of rotation) to remove slack from the belt. Tighten the tensioner adjustment to 26-33 ft. lbs. (35-45 Nm) and pivot bolts to 30-40 ft. lbs. (40-55 Nm). Be sure the belt is seated properly on the pulleys and that the timing marks are still in alignment when No. 1 cylinder is again at TDC/compression.

  4. Install the crankshaft pulley and belt guide.

  5. Install the timing belt cover.

  6. Install the water pump pulley and fan blades. Install the upper radiator hose if necessary. Refill the cooling system.

  7. Install the accessory drive belts.

  8. Start the engine and check the ignition timing. Adjust the timing, if necessary.

Posted on Jan 13, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Show me timing gears aligment from crankshaf to camshaf, wl 2.5 diesel bravo


They will have dot or line marked on the cam gear pump idler gears and front pulley turn motor over until TDC come up on harmonic balancer remove covers and marks should line up on cogs,mark all pointer,s with white out so it all goes back the same ,try Google on the computer they often have a video.

Jan 26, 2017 | Cars & Trucks

1 Answer

What is the torque settings on the 2.5 liter turbo WL diesel cylinder head


cant find that motors engine repair manual today

might be in here... has diesel motors listed

DF]Complete Cylinder Head Torque Specifications for Domestic and ...

fme-cat.com/LiveDocs/99999.pd

Oct 21, 2016 | Cars & Trucks

1 Answer

How is the timing mark on fuel pump wl engine mazda 2004


If this is a coomon rail diesel engine then it doesnt matter what position the fuel pump is in as its not timed its only a pressure pump as such

Sep 03, 2014 | Cars & Trucks

1 Answer

Iveco 35.10 1998 2.8 turbo diesel timing marks


The timing mark will be either on the harmonic balancer or in a hole in the bell housing. If in the bell housing there will be a pointer that will point to marks on the flywheel face and the timing mark will be ING or a number like 15 or 17 or 21 . This is the number of degrees before TDC that your engine has to be set on for correct timing. You will get this number from a work shop manual or a dealer service centre or a diesel pump repair shop. The same on the harmonic balancer . Unlike petrol engine s where you can alter the ignition timing, with a diesel, that required timing mark is exact and any attempt to vary it ( advance - retard ) will result in engine damage . If the spec\'s say 17 degrees then that is it.

Mar 18, 2014 | Cars & Trucks

1 Answer

Holden timing marks for 2.8 diesel turbo 1999 rodeo pictures of timing gears and marks please


hi i got a izuzu holden 2.8 turbo diesel gear timming i need a pic of timming marks pls i put in new diesel pump

Oct 05, 2011 | Cars & Trucks

1 Answer

WL Turbo 2500cc Diesel engine oil in the water


If you have an oil cooler, It has an internal leak.

Nov 14, 2009 | 1995 Mazda MPV

1 Answer

Timing marks for 86 diesel pajero


I can send you the timing marks and procedures. Email me: technopro@windowslive.com
Cheers.
Give me the engine number...4D55 or 4D56 Turbo/Non turbo.
Cheers

Apr 20, 2009 | Mitsubishi Passenger Cars & Trucks

4 Answers

HELP!!!!need timing marks for pajero 94 2.8 auto *** import


there is a little mark on the crankshaft which you line up with the 'o' mark on the casing ..
remove the cam cover and look at the cam you should see a nob on the cam about 3 th lob and that should be facing just left of the engine ..
if you have a turbo there is two notchs on the injection pump pully ..if turbo there is a 't' mark on the rear of the cover the notch on the pully should mark up with the 't'..
the timing is set..

Feb 05, 2009 | 1994 Mitsubishi Montero

Not finding what you are looking for?
1999 Mazda B2500 Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...