Question about 2002 Buick Rendezvous

Open Question

Cant remove bcm on buick Rendezvous - 2002 Buick Rendezvous

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

hdsoft
  • 80 Answers

SOURCE: how do I disconnect the air bags to replace the

In the console fuse box there is a 10 amp fuse marked sir.Remove it wait 15 minutes for the derm(diagnostic energy reserve module) to power down.

Posted on Aug 11, 2009

Testimonial: "I searched for a solution to this for many hours. I never thought that the solution would be so simple. You are appreciated"

  • 436 Answers

SOURCE: Buick Rendezvous 2002 need codes?

the BCM needs to be programmed to operate the computer. a GM techII is now required to calibrate BCM to airbag, stereo, keyless entry, and control pcm data. This is required to make it all work. a gm service should have it done within an hour or less just call and ask them how much it would be to program new BCM. it might cost @$75 to $125 but it is needed, to allow the BCM to work properly.

Posted on Sep 11, 2009

Testimonial: "ok...i bought the bcm on line (used)...but the gays in the dealer says i have to buy a new one..because the used cannot be to reflashed...or recoded."

  • 1116 Answers

SOURCE: Is the GM dealership my

Physical replacement isn't that difficult I don't think, but it has to be programmed at dealer.

Posted on May 26, 2011

  • 37 Answers

SOURCE: how to remove alternator in 2003 buick rendezvous

here is a pdf file showing you how to remove it.

http://www.mediafire.com/?xa0wbaadt3t3tvr

thanks and please rate my answer

Posted on Jan 05, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, how do I resolve an error code B3857 in a 2004 Buick Rendezvous 3.6L engine? Thanks!


DTC B3857 Circuit Description
The body control module (BCM) monitors the high beam headlamp signal circuit by verifying the high beam input.
Causes possible BCM problem.

Nov 22, 2016 | 2004 Buick Rendezvous

1 Answer

I have a buick and while driving it it will ding and change the station and sometimes it will turn it on and off


Got to love electronics. It could be the BCM or the radio. The BCM makes the ding noise. The switching is the radio. I would replace the radio first.

Dec 14, 2015 | 2006 Buick Rendezvous

1 Answer

Where is the body control module 2002 buick rendezvous


the body control module is under the radio. the center console plastics must be removed and it is in a clamp like bracket behind the floor shifter. quite a bit has to be removed. keep in mind that gm locked the bcm so you cannot use a used or salvage bcm because only very high end tech 2 scanners might be able to get in to program it and without programming the windows wont go down and the radio wont work.

Jun 09, 2014 | 1999 Chrysler Town & Country

1 Answer

Reprogram BCM on a 2005 buick rendezvous 3.4l cx


Take it to the delaership, or stealershiip as I like to call them. You can't reprogeam the BCM without the special scan II tool.

Mar 21, 2014 | 2005 Buick Rendezvous

1 Answer

Odometer reads error on 2002 buick rendezvous awd is there a fuse for it?


There are a ton of complaints on this issue with the 2002 buick rendezvous. All electtrical problems . The dealship is the only one to reset it,sorry no fuse on it. If has to do the BCM

Oct 28, 2012 | 2002 Buick Rendezvous

1 Answer

Can i get a used bcm and have it programed later for the 2002 buick rendevous


you can get a used bcm if were on the same page (body control module). but you will need the numbers off of yours to get the right one.. they have several, and the numbers have got to be the same to work with your vehicle.

Dec 05, 2010 | 2002 Buick Rendezvous

1 Answer

Buick Rendezvous 2002 need codes?


the BCM needs to be programmed to operate the computer. a GM techII is now required to calibrate BCM to airbag, stereo, keyless entry, and control pcm data. This is required to make it all work. a gm service should have it done within an hour or less just call and ask them how much it would be to program new BCM. it might cost @$75 to $125 but it is needed, to allow the BCM to work properly.

Sep 10, 2009 | 2002 Buick Rendezvous

1 Answer

How do I disconnect the air bags to replace the BCM in a 2002 Buick Rendezvous


In the console fuse box there is a 10 amp fuse marked sir.Remove it wait 15 minutes for the derm(diagnostic energy reserve module) to power down.

Aug 11, 2009 | 2002 Buick Rendezvous

Not finding what you are looking for?
2002 Buick Rendezvous Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...