Question about Cars & Trucks
I have a ford escort zetec engine energy essense 1.6 16v box type auto ctx No. Type Series Type WF0AXXGCAATB59682 AALAMENAGE date of first matriculation 21/02/1996. the problem I insane hydraulic transmission block the BVA, I removed the pistons and springs. now I do not know what place I must reassemble. prayer help me by sending me a diagram or video. thank you very much E-mail : firstname.lastname@example.org
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
dextron mercron 3, automatic transmission fluid. Mostly standard on fords and others for both auto and manual trans. Underneath the air intake pipe, at the rear right hand side there is a 4 prong plug for the speed sensor. Its electronic so there wont be any cable, its a round sensor with a horizontal plug on the end of it. Take a flat head screwdriver and pry the 2 holding prongs off the wiring harnes. then get a #10 socket 1/4in drive with exstinsions works best take out the bolt going right with the rachet. once you get it out just pull and twist the sensor out. It seems to be easier with a hose at the end of the funnel to pour the fluid in. stick the hose where the speed sensor was. once its full just assemble it back the way it was.
Posted on Oct 17, 2008
cam shaft timing marks on back of cams ,two slots ,use a flat piece of metal to align .remove no1 spark plug and drop long thin screwdriver down it to bring piston just below tdc,then align cams so both cams are on the rock (valves closed) with knob on back cam aligning with pick up sensor left side between lobes.then bring piston up to tdc and fit belt.turn engine over twice with socket on bottom pulley to make sure no valves clear pistons.Remember to remove flat edge from back of cams i didnt last time and bent my home made tool
Posted on Jan 28, 2009
The transmission fluid is not to be checked or touched unless there is a malfunction in the system and the fluid has to be drained to repair it. The transmission is sealed form the factory and the fluid lasts the lifetime of the unit.
Posted on Jan 29, 2009
Tips for a great answer:
Dec 21, 2015 | Ford Cars & Trucks
Nov 23, 2015 | Cars & Trucks
Feb 04, 2011 | 1999 Ford Escort
Jan 31, 2011 | Ford Escort Cars & Trucks
Aug 08, 2010 | 2000 Ford Escort
Apr 19, 2010 | 1997 Ford Escort
Apr 17, 2010 | 2000 Ford Escort
Mar 23, 2009 | 1998 Ford Escort
Jul 09, 2008 | 2000 Ford Focus
12 people viewed this question
Usually answered in minutes!