Question about 2004 Chevrolet Corvette

Open Question

Replace front turn signal-2004 Corvette

How do you remove the bulb, hard to reach it.

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 251 Answers

SOURCE: replace rear turn signal bulb

it's in the trunk behind the materail in the trunk

Posted on Sep 11, 2008

  • 2 Answers

SOURCE: rt front turn sighal burned out - how to access bulb to replace

There is a latch to the Van's outside just insert a flat blade screw driver and the turn light assembly will swing toward the middle of the van.

Once open the lamps twist out.

Posted on Feb 07, 2009

  • 98 Answers

SOURCE: how to replace front turn signal bulb

its easy. when the sinal flashes fast its just telling you a light is out. there might be 2 ways to fix this. open the truck look for the housing for the lights. now you may have to just turn the harnest where the wires are. or you just nee a phillps screw driver and unscrew the plastic cover off.

Posted on May 14, 2009

  • 5 Answers

SOURCE: replace turn signal bulbs on 2001 corvette

Rears are simply remove the two screws on the lens and remove the tail light from the Vette, twist the connector to get to the bulb. Reverse instructions to install. For the fronts jack up the front, remove the small closeout panel under each side, push the brake cooling duct to one side and twist the bulb socket out of the light to get to the bulb. Reverse instructions to install.

Posted on May 15, 2009

  • 14036 Answers

SOURCE: need replace turn signal bulb


Posted on Aug 24, 2009

Testimonial: "thanks"

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to replace the front turn signal bulb on a 2004 toyota solara

Behind it by head light under hood gotta reach hand in there may have to remove few things to get to it. Need help let me know:)

Feb 13, 2014 | 2004 Toyota Solara

1 Answer

How do you replace a front turn signal bulb

I replaced the front turn signal bulb on my 2004 CTS. I removed about 4? screws holding the inner fender to the outer fender, just forward of the tire. Then you reach your hand in and find the socket. Twist the socket about a quarter turn to unscrew it and remove the socket. As I recall the bulb is pulled straight out of the socket.

May 14, 2011 | 2003 Cadillac CTS

1 Answer

How to change front turn signal bulb on 2004 corvette

The front of the vehicle has to be raised up enough to remove the close out panel.This is located by on the side under the front bumper.Should be close to the turn signal lens area.After removing this panel you will need to remove the brake caliper cooling duct from the front fascia and position it aside.Then remove the bulb you need to replace.Then just reverse procedure.Hope this helps.Good luck.Let me know if you have any more questions.

Mar 01, 2011 | Chevrolet Corvette Cars & Trucks

1 Answer

How do you change the turn signal bulb on front passenger on my 2000 corvette?

Do it the easy way! Pop down the brake duct cooling vent on the front fasica and stick your arm, not real comfortable, throught there feeling around for the light bulb. It might take a minute or two to find the first time, but it's not hard. When you find it turn it 1/4 turn and remove it. The wire is long enough to come out of the front opening so you can change the bulb and replace easily. Pop the brake duct back in place and you're done. 5 minutes max first time, I can do it in about 30 seconds now.
Or you can take off the bezel around the headlights and reach down and unplug the light socket. Does not work well with large arms.

- there is an access panel under the front fasica that you can remove and have total access to the area where the lights are. Just have to get the car up off the ground a bit.

Nov 19, 2010 | 2000 Chevrolet Corvette

1 Answer

How to change the front turn signal on a 2001 corvette

For the 2001 Corvette it's simple for replacing it. Using a Sylvania yellow bulb, part# 3157NA LL or 4157NA LL

Reach inside the air intake opening just below the turn signal and push the black friction-fit hose back and down so it is out of your way. With the fingers of one hand, you can press the top of the black plastic duct (air intake) down to make room for your other hand to squeeze into the opening. Reach inside the hole and locate the wiring harness and lamp socket for the turn signal. The harness is on the bottom of the lamp assembly, so that the bulb is essentially sticking upwards into the reflector housing. Turn 1/4 turn and pull wiring harness out of the opening. Change the bulb and reverse the process. Takes about 4 minutes.

Aug 26, 2010 | 2001 Chevrolet Corvette

1 Answer

How do you change a front signal bulb on a 2004 accord

Front turn signal bulb replacement

1. Remove the inner fender
2. Disconnect the 3p connector from the front turn signal/side marker light.
3. Turn the bub socket ( 45 degree ), counterclockwise to remove the bulb.
4. Install a new bulb in the reverse order of removal.

Apr 12, 2010 | 2004 Honda Accord

1 Answer

Changing front directioal signal bulb on 2000 corvette need free how to

Turn your ignition on and your headlights. Turn the key off and then the headlights. They should stay open. Open the hood. Remove the rubber 'bump stop' located next to the headlamp on the side that has the bad bulb. Be careful to not change the location of the lock nut.
Now you have a big opening that will allow you to reach down to the rear of the directional signal and remove the socket and bulb by turning counter clockwise. Replace the bulb. I like to put some dielectric compound or at least some vaseline on the base wires of the new bulb.
Test. Reverse procedure for reassembly. Congratulations....... you just saved $70.00!!! Dave

Jul 01, 2009 | 2001 Chevrolet Corvette

1 Answer

How do i change rear turn signal bulb on 89 corvette, notmine???

Rear Turn Signal, Brake and Parking Lights 1984–89 VEHICLES
  1. If removing an inner bulb, remove the license plate. For outer bulb replacement, reach from under the vehicle.
  2. To remove the inner rear brake light, you must reach behind the license place and under the vehicle to access the bulb and socket
  3. Remove the socket from the lens by releasing the locking tab and twisting
  4. Once the bulb and socket are pulled from the rear of the lens, grasp it from behind the license plate opening
  5. Then, pull it out of the side and replace the bulb
  6. Remove the bulb from the socket and replace.
  7. Installation is the reverse of the removal procedure.

Apr 05, 2009 | 1989 Chevrolet Corvette

2 Answers

Left turn signal

through corvette forum website they give instructions to do it through the headlights.

Nov 05, 2008 | 1999 Chevrolet Corvette

2 Answers

Front turn-signal bulb burned out.

It is a tight squeeze, but you can get your arm down past the headlight to the brake cooling duct and pull the brakeduct off the nose of the car back and to the side. Then you can reach through that hole and replace the turn signal blub

Jun 13, 2008 | 2001 Chevrolet Corvette

Not finding what you are looking for?
2004 Chevrolet Corvette Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

78238 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides