Question about Cars & Trucks

Open Question

Vectra w reg pas belt

Swilling on hard right could this be the belt

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 Reg Vectra Engine Management Light On

Have you cleared all the faults?
Try it again after clearing.

Feb 18, 2014 | Cars & Trucks

1 Answer

Swilling noise when I turn on headlights from engine

turning the lights on causes a load on the alternator especially if the belt is loose..tighten the alternator belt and it should stop..may need to put a new belt on too.. that would be better..

Dec 27, 2013 | 1995 Jaguar XJ6

1 Answer

Vauxhall vectra reg owners manual

you need to back flush the system. take the hoses of the rad line to the in side rad. and flush it out. at same time may aswell to the rest of the system get all the muck out of the system. needs to be done evey few years.

Nov 26, 2013 | Vauxhall Cars & Trucks

1 Answer

Dash board lights on w reg vauxhall vectra have gone out

Just open the fuse box and look for the blown one. If you look at the fuses, you will see a shiny bit in a small gap on the top of them. The one you are looking for will not have this shiny bit. First make sure the Dashboard Dimmer has not been turned all the way down. Your car may not have this as you don't mention the model.

Nov 18, 2012 | Cars & Trucks

1 Answer

Aux belt

aldo it come from, a new in box,it can still be the wrong type.
so i would check if they mach the belt and lock as it says in manuel.
look for macthing numbers.and size.

Jul 26, 2012 | Cars & Trucks

1 Answer

Trying to determin if i have a bad ignition switch

well first give both switches a good swilling of switch cleaner or some thing like WD40 then if this dont put it right take off the clutch switch turn on the ignishion and short out the clutch switch if the motor turns over its the clutch switch if it dont its the ignishion switch but i bet a good swilling with WD40 sorts it out first,

Feb 19, 2010 | 1989 Ford F 250

2 Answers

Replace timing belt Holden vectra 2.2ltre.i need to know how to set up the marks

timing cover has marks on it,line it up with pulley,remove pulley and cover,check to see if any marks on camshaft.un do be sure make your own marks

Jan 01, 2010 | 1999 Isuzu Rodeo

1 Answer

Linking error

check the fuses... usually thats the fix....

Aug 08, 2009 | 1999 Pontiac Montana

1 Answer


if you look on the gear box there will be a stamp on it sayin f16,f18,f23 etc or ring your local vauxhall dealer and give them the reg regards

Apr 25, 2009 | 1997 Acura CL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides