Question about Nissan Frontier

2 Answers

Slow starter I have a 2000 Nissan frontier IT seemed the starter was failing so i replaced it. i am still having trouble wit it 4 out of 5 time it turns over but the 5th time it just clicks i checked all wires and applied voltage to the black with pink wire to bypass all electronics I get the same results every once in a wile just get the clicking. I pulled out the new starter and looked at the teeth everything looks fine.What would cause the starter to bind with flywheel? also applied jumpers to batt to make sure i was getting good amps on the starter I am really puzzled with this one ant thoughts

Posted by Anonymous on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Nissan Master
  • 75,822 Answers

You must have a defective battery cable, check for acid intrusion into the positive cable, it will be a *********** and the copper conductor will look greenish.

Posted on Apr 20, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 11,486 Answers

Voltage drop test the starter circuit ! Bad cable maybe . no ohm testing , loaded circuit voltage testing . Starter Voltage Drop
How to voltage drop test starter motor circuit

Posted on Apr 20, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Bat1956
  • 585 Answers

SOURCE: 93 buick lesabre 3.8 liter starter replaced,new one just clicks

Given the steps you have taken, only one of two things this can be is a resistive connection between the battery and the starter solenoid terminal. Or the battery itself has a bad internal connection. Bear in mind: you cannot crank the engine through the average set of jumper cables unless the battery in the dead vehicle will hold and deliver a good charge. Jumper cables are not really intended to start the car, they are for boosting the good, but low battery in the car being jumped.

Posted on Dec 16, 2008

  • 564 Answers

SOURCE: i have 2003 cad cts mt new battery,new starter

does the vehicle have an anti theft device on it if so it may need to be reset. usually all you have to do is unlpug the negative batt cable. for about 5 mins.and reconnect it. if this does not solve the problem look i the owners manual to see how to override the system.

Posted on Dec 11, 2009

Ken17402
  • 615 Answers

SOURCE: Mazda6 MTX random starter misengagement? New

check your battery find someone with a load tester, or parts store if battery checks out good and all cables are clean your starter is the problem just because you replaced it doesnt mean its good .

Posted on Nov 27, 2010

rickbrashear
  • 176 Answers

SOURCE: My 2000 Mitsubishi eclipse ran fine till I

I would remove the starter and hook the wires back up and while it is out of the engine try to start the engine, if the starter spins then it is good and your problem might be that it was in a bind or the motor is locked up. I am assuming that the starter is brand new also, if used or refurb you might take it to a parts store and have them put it on a tester.

thanks
rick

Posted on Jul 05, 2012

Testimonial: "Thanx for trying to help and giving me the idea to check that Ricky:)"

redds55
  • 2620 Answers

SOURCE: Nissan frontier starter binds the flywheel

You need to put shims in between the starter and the engine block.You should be able to pick them up at your local auto parts store.

Posted on Nov 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove a starter on a 4 wheel drive 2002 Nissan frontier???


How to replace a starter on a 2000 nissan frontier v6 3.3L ...

? 3:14
www.youtube.com/watch?v=ibyIqgGeIug
Jan 6, 2013 - Uploaded by Raul Romo I show how To replace a starter on a 2000 Nissan frontier Part 1. ... and solenoid plug from under the rubber splash guard in thewheel well.

Oct 07, 2015 | 2002 Nissan Frontier Crew Cab

1 Answer

How replace the starter in 2001 nissan frontier manual trassmisson


same as all cars. (mostly)
this your first starter?
no problem.
its in the FSM read that.
or alldata.com , log in
or pull neg lug on battery
gain access to starter, (RTM)
remove wires there.
remove 2 bolts
its out.
reverse is same , read above backwards.

Jul 17, 2014 | 2000 Nissan Frontier

1 Answer

1999 nissian frontier quite running mechanic says its distributor again. we spent the 600 or so dollars on a new one approx. 18 months ago whats up? is this a common nissian problem or a common me


Slow cranking will make it hard to start this is not anything to do with the distributor but either a lazy starter motor or a failing battery ,put a drop tester on the battery and see if its ok if so then use a heavy duty induction amp meter on the earth lead and see what the starter motor is drawing ,if more than 180 amps then starter is the problem

Jan 03, 2013 | 1999 Nissan Frontier

1 Answer

2000. Nissan frontier. V6. P335 trouble code won't go away crank position sensor


If you have replaced the crank sensor and the code comes back, it may be a problem with the wiring harness or connector, or the plate the sensor reads.

Sep 26, 2012 | 2000 Nissan Frontier

1 Answer

How do replace a knock sensor on 2000 nissan frontier


2.4 takes 15 minutes. It's on the passenger side of the block behind the motor mount. Jack up truck .Can be easily reached from where the starter is at. 12 mm socket and you can see and replace it. Make sure to unplug battery first.

Jun 27, 2012 | 2000 Nissan Frontier

1 Answer

1999 Frontier: nissan frontier 2000 automatique tansmision revers...


Either transmission oil pump is on its way out or reverse circuit is clogged , reverse shift solenoid is defective TCM may be defective , transmission range sensor begining to fail or manual shift valve and pressure regulator are defective.

Suggest taking the vehicle to a transmission repair shop they will diagnosis it and repair it.

May 18, 2010 | 1999 Nissan Frontier

2 Answers

What is eng oil capacity for a nissan frontier 4 banger 2000 model


Including filter; the oil capacity for a 2WD, 2000, Nissan, Frontier, 4cyl (Ka24de) is 3-3/4 quarts. Straight out of the Haynes manual.

Nov 28, 2009 | 2000 Nissan Frontier

3 Answers

Timing belt change for a Nissan Frontier


Some say 80000,but I would say 60000,

Nov 06, 2009 | 2000 Nissan Frontier

1 Answer

2000 NISSAN FRONTIER VIBRATION


Check tire balance, rear wheel bearings and i would replace u joints front and back, anyway if they have never been repaced.

Jan 12, 2009 | 2001 Nissan Frontier Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...