Question about Volvo Cars & Trucks
I want to change language in my Volvo s80 from Italy to English
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Weell it sounds like you have the days old problem Pepole dont know how to look after there cars.
The muck you still have in the engine isent doing it any good and so you have to get rid of it all, as its in the engine block and is got to go ,,so drain a little of water out and put in 1/2 a cup of washing up liquid in the radiator and start the engine and let it get hot and take the reves up to 1000 rpm now and then to keep the water going around the system, after about 1/4 hr turn off,,stand for 10 minutes ,,and then remove the cap slowly and then take off the Bottom hose and let all water out also take off Top hose at the engine end and put the house water hose in the top and turn it on till all water comes out clean. Then put hose up into the bottom hose and do the same again ,and the same in top again.Now with a clean engine you can do the same to the new Radiator and wash out all gunk .then check the thermostat and make sure its 100% (any doubt through it out) and take note how it comes out so you can fit a new one the same way,
Now refit both hoses and fill with coolant or antifreeze and TURN on the heater to hot before starting as you also have to get out the air from heater when it was drained and you will trap the air which might cause you code problems..
But now try service light reset
1,,Turn Ignition to Number 1position.
2,,Press and hold "day counter"reset button and turn
ignition to II(second) position,hold down for about 12 seconds.
3,,Afterservice light flashes,release button,there should be 2 beeps confirming reset was successful.
Let me know how you get on .. Ron
Posted on Nov 02, 2009
The only way is to go to your local Volvo dealer and have them do it for a very high price. It is a software package that is sold seperately for each language and uploaded via their internal diagnostics system - V.I.D.A.
Posted on Mar 14, 2010
As always use extreme caution when lifting vehicle, but I have found that the easiest way to lift my car for oil change is to put jack under the cross member under engine.
Posted on Apr 04, 2010
2002-2007 All Volvo Models
(For all vehicles 2003- a general yellow lamp will light when the reset button must be released.)
Posted on Aug 22, 2010
Tips for a great answer:
Dec 11, 2014 | 2005 Volvo S60
Jul 11, 2012 | 2008 Volvo V50
Mar 27, 2012 | Cars & Trucks
Jun 27, 2011 | 2000 Volvo S80
May 19, 2010 | 2003 Volvo S80
Jan 11, 2010 | 1999 Volvo S80
Nov 06, 2009 | 2005 Volvo S40
Oct 15, 2009 | 2005 Volvo S40
11 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: