Question about Buick Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: rough idle stalls at low rpm's
hello first check your idle with the car running foot on brake see were your rpm reading is if your below 500rpm check your label underhood for your curb idle setting second see if theres a adjustment screw you can increase were your gas cable lever rest against your set screw underhood if you feel confident enough remove your iac motor idle air control valve if the bore were the end of the pintle extracts out to close has varnish builup our carbon it will stick creating vacuum leak type senario causing stalling rough idle sometimes even no start conditions good luck
Posted on Sep 18, 2008
need to take car somewhere to have the code read with a scanner,try parts stores first some will do it for free if not the dealers have them
Posted on Sep 15, 2009
Regarding the repair of the rear window defroster. There is a "electric ACD module" on the inside rear driver side roof sail that connects to the rear defroster and antenna. I had the same problem and found the connector for the defroster had overheated and melted resulting in a failed connection. The NAPA part numbers for the module and replacement connector are 25623688 and 15305949.
Posted on Oct 20, 2009
Tips for a great answer:
Apr 19, 2017 | 1997 Buick Park Avenue
Oct 30, 2015 | Cars & Trucks
Sep 14, 2015 | 2000 Buick Park Avenue
Dec 16, 2013 | 1998 Buick Park Avenue
Jun 12, 2012 | 2001 Buick Park Avenue
Mar 31, 2011 | 1989 Buick Park Avenue
Aug 09, 2009 | 1991 Buick Park Avenue
Apr 02, 2009 | 1991 Buick Park Avenue
66 people viewed this question
Usually answered in minutes!