Question about Alfa Romeo 164

Open Question

Hazard lights flashing - 164 Alfa Romeo Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my hazard lights work on my 1996 GMC Sierra pickup.


Do you have power in and out of the hazard flasher ?

Jun 15, 2014 | 1996 GMC Sierra

1 Answer

Should my hazard light switch flash when my hazard light are on my crv is 2004


If it does, then yes, it's supposed to. If it doesn't, as long as the hazard lights flash like they're supposed to, then all is good. Most hazard light switches don't flash. Some do. The likelihood of just that little bulb in the switch not working is almost zero.

Aug 14, 2013 | Honda CRV Cars & Trucks

1 Answer

Hi, I just got a series 3 1996 BMW. The alarm is constantly on and when we disabled it the hazard lights flash continuously. Any idea how to sort this?


There is a short in the connections so the hazard lights are flashing. The hazard flashers may begin flashing by themselves or the turn signals may flash at twice the normal speed due to condensation shorting out the circuit board. --------- Have you tried disconnecting the car battery, then turning the ignition on and reconnecting the battery? If not then please try this and check.And see if that makes any difference in the problem or solves the problem.--------- Also you can try disabling the hazards from flashing. To stop the hazards flashing pull the hazard switch out (pull the gear leaver gaiter out then you can put your fingers under the switch and push it out) then you will see a single wire in a black sleeving, cut this wire and this will stop them flashing.Also the alarm is behind the glove-box if you want to unplug it there. ----------- Keep updated for anymore query.Thanks.

Oct 12, 2010 | BMW 323 Cars & Trucks

1 Answer

Dash board of my 2000 crysler voyager keep flashing, and the out side lights do de same thing.


the hazard switch is the problem or it is cause by passive alarm, remove the hazard switch or hazard fuse and observe the function of the lights, if lights stop flashing, change the switch, if continous flashing check the keyless entry reciever or the body control module

Aug 06, 2010 | 2001 Chrysler Town & Country

1 Answer

Flashing ligth not working at all


Hi!!!

If your hazard lights turn on but do not blink, replace flasher.

If your hazard lights don't turn on, check hazard/stop/turn fuse(s).

Let me know how it worked out, good luck.

Mar 26, 2010 | 1998 Ford Windstar

1 Answer

The hazard lights start flashing and I can't turn


there must be alarm fitted that either has the siren disconnected or turned off. Basically sensing an intrusion alert or voltage drop. Flip out the hazard switch, there will be a wire which runs seperate from the body loom into this light, just cut it, the correct one though. if needs be trace it back.....probably end up behind the glove box

Oct 03, 2009 | 1995 BMW 5 Series

3 Answers

Turn signals wont work fuses are good?


the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem

Aug 30, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Indicator Problem


when you noticed the indicator being on solid, but flashing with the hazards, are you inside your car? I mean have you gotten out of your car to check if the bulbs are working when the indicator thrown and when the hazards are on. A hard on indicator usually means that you have a bulb burnt out. The hazards will still flash as normal when inside the car even if a bulb is burnt out because the hazards do not run via the Electronic Flasher Module. The EFM is what detects a burnt out bulb

Aug 24, 2009 | 2005 Audi A3

1 Answer

2004 audi A6 flasher lights


You need a new hazard light switch - the relay for the hazards and turn signals is built in. It's $40 or so at a dealership to buy a new one.

May 19, 2009 | 2004 Audi A6

1 Answer

Flashing Unit for Indicators Replacement


Most likely it's the hazard switch - the relay for the hazards and the turn signals is built into it. When they start to die, you will see erratic behavior with the turn signals and/or hazards, and eventually they'll both fail completely. Replace your hazard switch on the dash and you'll be good to go.

Aug 31, 2008 | 2000 Audi TT

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alfa Romeo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

907 Answers

Are you an Alfa Romeo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...