Question about 2000 GMC Yukon XL

Open Question

Water Pump Bolt torque specs

I need the torque specs for the water pump.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: Bolt torque Specs

30 foot pounds

Posted on May 02, 2009

Ad
  • 468 Answers

SOURCE: need water pump torque spec for 2002 gmc 2500 hd

Step 1, torque all bolts to 11 ft-lbs Step 2, torque all bolts to 22 ft-lbs

Posted on Oct 19, 2009

arauzvictor1
  • 466 Answers

SOURCE: need head bolt, intake manifold, and exhaust torque specs

Cylinder Head Bolt Step1- (25 FT.Lbs) Step2(45 Ft.Lbs) Step3(65Ft,Lbs).....Intake Manifold(35Ft Lbs)....Exhaust Manifold Center (20Ft Lbs) All Others (20 Ftlbs).....Thanks

Posted on Mar 06, 2010

daves944
  • 1050 Answers

SOURCE: Where can I get solid/detailed instructions for

Your best bet would probably be to buy a Haynes Manual. They are often available at parts stores. Most factory manuals will only give very basic procedural information as they assume that the tech has advanced skills and doesn't need step by step instruction. The Haynes book will have details and pictures, also tips they learned when they actually did the job.

Hope this helps,
Dave

Posted on Apr 26, 2010

ZJLimited
  • 17970 Answers

SOURCE: NEED THE CYLINDER HEAD BOLT

What year, model and cyl number there?

Posted on Apr 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 chevy silverado water pump bolt torque specs


What size engine ? This vehicle could have six different engines .
Water Pump Replacement (4.8L, 5.3L, and 6.0L)
Install the water pump bolts.
Tighten
  1. Tighten the bolts a first pass to 15 N?·m (11 lb ft).
  2. Tighten the bolts a final pass to 30 N?·m (22 lb ft).
Water Pump Replacement (4.3L)
Tighten
Tighten the bolts to 45 N?·m (33 lb ft).

Jun 24, 2016 | Cars & Trucks

1 Answer

4610 ford diesel tractor water pump bolt torque settings


First you need to know the diameter of the bolts and the type of thread ie 3/8 N/C or 5/16 N/F then look at the type of bolt ie plain steel or high tensile SAE grade 3, 4, or 6, once you know this go to a general purpose bolt torque chart, and derive the torque spec info.
If the water pump is cast iron use the full torque specification.
If the water pump is alloy then reduce the torque spec 10%

Below is an example of a general purpose bolt / nut torque chart

26186159-4xbrgr0a3wt3vp4m2wlhd0as-1-0.jpg

May 05, 2016 | Ford Cars & Trucks

1 Answer

Torque specs for water pump bolts for putting on new water pump


Should really let us know the bolt size But if it takes a 14mm/ or 9/16 wrench us 30 foot pounds if it uses 13mm/ or 1/2 in wrench us 20 ft/lbs

Oct 18, 2015 | Cars & Trucks

1 Answer

Need torque specs. for water pump to 2004 chrysler pacific


I am certain I have the information you need. The problem is I am having trouble locating it in the FACTORY service manuals, terminology differs from what your searching for.

Torque for the Vibration Damper bolt is 115 Nm (85 ft.lbs.)

I am still trying to locate the pump torque.

Mar 28, 2013 | 2004 Chrysler Pacifica

1 Answer

What are the torqe specs for 2006 H3 fan/clutch and water pump


special tools you need EN 48543 FAN CLUTCH HOLDING TOOL. J41240 FAN CLUTCH REMOVER AND INSTALLER. TORQUE FOR FAN CLUTCH NUT 41 LB FT. FOUR BOLTS TO FAN BLADE TORQUE 20 LB FT.WATER PUMP BOLTS TORQUE TO 11 LB FT. DONT NEED SPECIAL TOOLS REMOVE WATER PUMP.

Nov 29, 2012 | 2006 Hummer H3

2 Answers

Water pump replacement torque settings


iv never torqued water pump ive always snugged them up pretty good i mean you don't have to stand on the end of the wrench if you use lock tight on the bolts once you tighten them up they wont come loose and you only need a drop of lock tight on each bolt hope this helps you bob

Apr 30, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

Replacing the water pump on 96 chevy S10,


Water Pump Removal & Installation 2.2L Engine To Remove:
  1. Drain the cooling system.
  2. Remove fan assembly.
  3. Loosen the water pump pulley bolts.
  4. Remove or disconnect the following:
    • Drive belt gm-03-22-606.gif

    • Water pump drive pulley bolts
    • Water pump drive pulley
    • Radiator inlet hose clamp and hose from the water pump
    • Water pump mounting bolts gm-03-22-605.gif

    • Water pump
    • Water pump gasket
    gm-03-22-607.gif

To Install:
  1. Clean the mating surfaces.
  2. Install or connect the following:
    • Water pump gasket
    • Water pump Note: Apply a sealer (GM P/N 12346004) or equivalent to the bolt threads
    • Water pump mounting bolts
      1. Torque to: 18 ft lbs (25 Nm)
    • Water pump pulley and bolts
      1. Torque to: 18 ft lbs (25 Nm)
    • Radiator hose and clamp
  3. Fill with coolant.
  4. Check for leaks.
4.3L Engine To Remove:
  1. Drain the cooling system.
  2. Remove fan assembly.
  3. Loosen the water pump pulley bolts.
  4. Remove or disconnect the following:
    • Drive belt gm_truck_43_wppulley.gif

    • Water pump drive pulley bolts
    • Water pump drive pulley
    • Radiator inlet hose clamp and hose from the water pump
    • Water pump mounting bolts gm_truck_43_waterpump.gif

    • Water pump
    • Water pump gasket
gm_truck_43_waterpump_gsk.gif

To Install:
  1. Clean the mating surfaces.
  2. Install or connect the following:
    • Water pump gasket
    • Water pump Note: Apply a sealer (GM P/N 12346004) or equivalent to the bolt threads
    • Water pump mounting bolts
      1. Torque to: 30 ft lbs (41 Nm)
    • Water pump pulley and bolts
      1. Torque to: 18 ft lbs (25 Nm)
    • Radiator hose and clamp
  3. Fill with coolant.
  4. Check for leaks.
prev.gif next.gif

Feb 12, 2011 | 1997 Chevrolet S-10 Pickup

1 Answer

Installing new water pump on my Scout 2 (345 v-8). What setting do I torque the bolts to?


International does not give a torque spec. for the water pump, so use the bolt manufacturer spec.if i remember right the water pump bolts on a 345ci were 5/16in and 3/8in so 28-32 ft lbs on 5/16in 35-42 ft lbs on 3/8in......hope this helps

Dec 11, 2010 | Ford Bronco II Cars & Trucks

2 Answers

Need to replace water pump on a1997 chevy lumina 3.1L V6 need insructions


3.1L And 3.4L (VIN E) Engines
  1. Disconnect the negative battery cable.
  2. Partially drain the cooling system into a suitable container.
  3. Remove the drive belt guard.
  4. Loosen the water pump pulley bolts before removing the drive belt. This should help keep the pulley from turning as the bolts are loosened.
  5. Remove the drive belt. Please see Section 1.
  6. Remove the water pump pulley bolts and remove the pulley.
  7. Remove the water pump bolts and separate the pump from the engine front cover.
To install:

b604dca.gif
Exploded view of the water pump and front cover arrangement—3.1L and 3.4L (VIN E) engines


  1. Clean all parts well. Use care when scraping gasket material from the front cover and the pump. Do not gouge aluminum parts. Clean the bolt threads well. The torque specification is low and if the bolt threads are dirty, an accurate torque is not possible and leaks are likely to develop.
  2. Using a new gasket, install the water pump to the front cover. Install the cleaned and lightly lubricated water pump bolts. Torque to 89 inch lbs. (10 Nm).
  3. Install the water pump pulley and bolts and torque to 18 ft. lbs. (25 Nm).
  4. Install the remaining components in the reverse order of the removal process. When refilling the cooling system, use the proper mix of DEX-COOL® and water. Check for leaks.

Oct 13, 2009 | 1997 Chevrolet Lumina

3 Answers

Replace water pump


First you must drain the coolant. Remove powersteering pump[keep hoses connected)this is just to make room for water pump removal so just sit it off to he side.Loosen the the water pump pulley mounting bolts, remove the drivebelt,remove the pump pulley. Remove the pump mounting bolts and pul the pump from engine.Install every thing in reverse ,but be sure to clean the mating surface of old sealer and gasket first, also be sure to use RTV gasket sealer on engine side of the new gasket.Be sure not to over/under tighten the bolts the torque specs. are 22 to 29 for the long bolts and 96 to132 for short bolts and 108 to 132 ft lb for the pulley bolts.

May 15, 2008 | 1994 Oldsmobile 88

Not finding what you are looking for?
2000 GMC Yukon XL Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...