Question about 2009 Ford Flex

Open Question

2009 ford flex driver seat lumbar problems. can here it but do not work

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: 2009 ford flex - in for slipping transmission 2x,

i work at a ford dealership and its very rare to actully have a flex come in for somthing wrong... im sorry to hear about your missfortion

Posted on Jul 13, 2009

Ad
  • 103 Answers

SOURCE: seat belt way too tight, making for uncomfortable

Take it to the nearest Ford dealer, there may be a recall,or TSB. Just ask them.
Please rate this.

Posted on Jul 23, 2009

  • 25 Answers

SOURCE: 1993 Ford F150 4X4 Power door locks, power

CK FOR POWER TO LOCK @ WINDOW SWITCH IT COMES FOR MASTER WINDOW SWITCH ON LEFT SIDE DOOR NOT SHORE ON LUMBAR CONN.UNDER SEAT CK IT FOR POWER

Posted on Sep 28, 2009

dsakrison1
  • 65 Answers

SOURCE: The lower lumbar support on the driver seat will

the air lumbar is an air bladder in the seat that is inflated by an air pump. Either the Check valve in the pump has failed and not holding air in the baldder, or the bladder has cracked and is leaking. May be possible to find another seat at a junk yard that is the same as yours. Replacing the entire seat is simpler then replacing just the bladder and pump assembly.

Posted on Oct 06, 2009

  • 564 Answers

SOURCE: 1996 Ford Explorer - Eddie Bauer 4WD - Replace Power Seat Switch

the switch pops in or out just pull on it unless you see screws it should just pop right out theres no need to worry about the srs.

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Buick Lucerne, power driver seat won't adjust on seat or through memory button. Passenger seat works fine. Heater for both seats won't turn on. Checked fuses and relays, all ok


Your best bet , have it checked for DTC'S - diagnostic trouble codes first ! Electronic control modules involved ! Can't check with a OBD 2 code reader , need advanced scan tool . No codes , check B+ voltage and ground to the module .
Power Seat Inoperative (With Memory A45)
Memory Seat Feature Inoperative
Circuit/System Description
Battery voltage is supplied at all times to the memory seat module (MSM) from the MDL-MEM 10A fuse located in the rear fuse block. This voltage is used by the MSM for logic power and to supply battery reference voltage to the seat and lumbar adjuster switches. Battery positive voltage is also supplied at all times to the MSM from the PWR SEAT 25A circuit breaker. This voltage is connected to a power rail internal to the MSM and is used to drive the power seat motors, lumbar motors, and seat heater elements on vehicles equipped with heated seats. Each seat and lumbar adjuster motor is controlled by the MSM through 2 motor control circuits. The MSM connects all motor control circuits on the power rail to a common reference point whenever they are not in operation. This reference point is biased to approximately 2.5 volts. The MSM checks to see if the reference voltage is shorted to ground or battery before enabling any of the seat or lumbar motors.

Circuit/System Description
Reference voltage is supplied to the memory switch from the driver door module (DDM). When a memory switch is pressed, reference voltage is applied through the switch contacts, a series of resistors and thorough the memory switch signal circuit to the DDM. The door module then sends a serial data message to the memory seat module (MSM) indicating the memory recall request. The MSM then commands the appropriate seat motors to move to the pre-recorded seat positions stored in memory in response to the switch input.

Sep 02, 2017 | 2009 Buick Lucerne

1 Answer

My lumbar on the driver seat does not work an the switch is stll good what could be wrong


lumbar on the driver seat Shawn, Its cable driven plastic plate. It can possibly be repaired once you disassemble it and can see it, if not repairable you can replace the lumbar. Check the attached links,forums with instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Thread Town Car Lumbar motor assembly replacement

Power seat lumbar support repairs

Drivers Power Seat Just Stopped Working Lincolns OnLine Message Forum

Apr 08, 2016 | 2007 Lincoln MKZ

1 Answer

How to remove manual lumbar lever from shaft drivers seat


Chevrolet Impala Problems & Complaints ...

www.chevroletproblems.com/Impala/
ChevroletProblems.com provides free information about Chevrolet Impala problems ... The worst model years for the Chevrolet Impala are shown below. ... 2011 Chevrolet Impala38 · 2010 Chevrolet Impala60 · 2009 Chevrolet Impala98 · 2008 ...

Mar 08, 2015 | 2006 Chevrolet Impala

1 Answer

Driver side power seat and power mirrors not working


Driver door or seat module. All of these components are controlled by s module. You'll need a scan tool to properly diagnose.

Apr 19, 2014 | 2009 Ford Flex

1 Answer

How do you remove the front power seats in a Ford Flex?


4 bolts 2 in front 2 in back u may have to raze the seat up to get under it.Unplug the power seat then pull up and out.

Nov 26, 2012 | 2009 Ford Flex

1 Answer

Lumbar bladder loses air


you will need to take it to an upholsterer - have them remove the skin of the seat and install a new one - then put the seat back in.

Apr 01, 2010 | 1994 Ford Explorer Limited

1 Answer

The lower lumbar support on the driver seat will not hold air. 1994 ford explorer eddie bauer.


the air lumbar is an air bladder in the seat that is inflated by an air pump. Either the Check valve in the pump has failed and not holding air in the baldder, or the bladder has cracked and is leaking. May be possible to find another seat at a junk yard that is the same as yours. Replacing the entire seat is simpler then replacing just the bladder and pump assembly.

Aug 01, 2009 | 1994 Ford Explorer Limited

1 Answer

The Lumbar support adjustment fails


I wonder if you dont have a bad switch. I had a similar problem on my car except that it was the heated seats that would not engage... the power seat buttons all worked just fine. I changed the switch and it fixed the problem...

Note: this was on a BMW not a Murano

Dec 31, 2008 | 2005 Nissan Murano

1 Answer

Driver's side lumbar support in 05 pacifica seat won't inflate


there is a relay that controls the lumbar its under the seat unbolt seat replace the clicking relay

Dec 24, 2008 | 2005 Chrysler Pacifica

Not finding what you are looking for?
2009 Ford Flex Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5655 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...