Question about Geo Tracker
Posted by Anonymous on
Make sure wires are tight and battery wires are tight look for wires sitting on manifold
Posted on Feb 22, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Starter fails to start.
I'm having the same problem. The dealership keeps telling me it's the starter. I've replaced starter and still have the same problem. I have had all the wiring and new key swith put in and still have the same problem. I guess were in the same boat!!!
Posted on Jul 09, 2008
SOURCE: 1976 mgb w/cat converter please
I have the same model year as yours, but that does not really matter. If you go to the back of your Haynes manual, the wiring color codes are spelled out for you specific to your car, It is possible that a new or rebuilt starter can be stuck (clearances on starter gear/and shaft) or that you somehow bolted it in slightly askew and it is stuck or cannot move properly. Spot check the ring gear teeth by looking through the starter hole to see if they are o.k. and that the gear on the starter seems correct. Also, look around and check and make sure the ground strap is good (motor to body) or any ground for that matter
Sometimes, if a motor or starter motor is in a locked rotor condition this will cause a heat rise. It might be a good idea to remove it and energize it with jumper cables from the battery-- (a bench test) to verify actuation. (spin) Then wipe the grease of the leads (so you can read your color code) and carefully connect them to the terminals as the wiring diagram tells you in the Haynes manual.
Posted on Oct 11, 2009
my geo tracker wont turn over the lights wont come on nothing is working iv tested the battrey its fine and checked all the fueses they are fine too why is there no power to any thing?
Posted on Jan 26, 2012
This may be due to a bad neutral safety switch, is this car automatic or manual transmission?
If automatic try to start in neutral and if manual try to locate switch on clutch pedal and use a jumper wire to jump connector for switch, NOTE; If switch is jumped car will start in gear with pedal not pushed down and car will take off so this is just as a test not a repair!!!!!, good day
Posted on Oct 14, 2012
Tips for a great answer:
Feb 28, 2016 | 2002 Chevrolet Tracker
Feb 07, 2014 | Geo Tracker Cars & Trucks
Jun 25, 2012 | 2004 Dodge Neon
Mar 27, 2010 | 2000 Chevrolet Tracker
Nov 07, 2009 | 1995 Geo Tracker
Aug 17, 2009 | 2001 Ford Taurus
Aug 11, 2008 | 1993 Geo Tracker
Jul 18, 2008 | 1996 Geo Tracker 2 Door
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: