Question about 2003 Ford F150 Regular Cab
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2003 F150 4x4 will not engage
also locate the GEM module should be locate at firwall on pass.side . disconect negative battery post , pull gem wire plug, 8mm bolt-- clean and fill with dielectric- grease. at least that won't cost to much, alittle time and fewn bucks for grease.--this happend to me exact problem ,maybe same solution . good luck!
Posted on Aug 28, 2008
I am going to ask a dumb question....do you have it in neutral and the brake mashed when you switch to 4WD LOW? I believe that is what my book says to do.
Posted on Oct 27, 2008
SOURCE: There is no sound from
my keyless entry has been working great we went on vacation. it quit working i cheched the fuses and the battery in the remote everything is fine just does not work anymore
Posted on Nov 09, 2008
Could be a problem with the vac lines to the IWE ( Integrated Wheel Ends ), or a problem with the IWE solenoid, or a problem with the vent from the IWE.
Start with checking the vac lines, to make sure they are not cracked.
The vac res & IWE solenoid are behind the battery. Here is a diagram of the parts in the IWE vac system
There was a TSB for the 2004-2006 MYs with a bad design IWE solenoid, but this usually was coupled with noise in 2WD.
Start with checking the VAC lines and the vent, next would be to check the IWE solenoid.
Here is the PDF of the TSB on IWE solenoid
Posted on Nov 28, 2009
There is a special sequence for that. Let me see if I can remember... Pull to a level surface, put the parking barake on, put the truck in neutral, shift to four-wheel drive, release the brake, shift to drive.
The computer waits for this sequence. It has been many years since I did this. If it doesnt work, call your dealer shop and they will tell you the correct sequence.
Posted on Dec 21, 2009
Tips for a great answer:
Feb 01, 2014 | 2001 Ford F150 Styleside SuperCrew
Check and make sure your cooling sytem is ok
Mar 30, 2011 | 2001 Ford F150 Styleside SuperCrew
Mar 09, 2010 | 2001 Ford F150 Styleside SuperCrew
Nov 04, 2009 | 2001 Ford F150 Styleside SuperCrew
Jan 05, 2009 | 2001 Ford F150 Styleside SuperCrew
Oct 24, 2008 | 2004 Ford F150
18 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: