Question about 2000 Hyundai Accent

Open Question

Ecu 2000 accent - 2000 Hyundai Accent

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 87 Answers

SOURCE: 2000 hyundai accent lost spark

Hi, it should be the crank sensor that is bad. I never had to replace ecu on one of these but many sensors.

Posted on Mar 30, 2009

  • 87 Answers

SOURCE: what is "ECU" in ahyndai 2000 accent

ECU =ENGINE CONTROL UNIT.
it is the computer,the brain of the car or truck,
it runs every electrical sensor and spark plug
ignition and fuel system its what give u the codes
when something gos bad
and if the ECU is bad the car may not start

Posted on Oct 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai accent 2000, turns over, but sometimes wont start


hi
No gearbox oil got nothing to do with it.

Possibly the ecu not sending correct signals

Jul 07, 2017 | 2000 Hyundai Accent

1 Answer

What is "ECU" in ahyndai 2000 accent


ECU =ENGINE CONTROL UNIT.
it is the computer,the brain of the car or truck,
it runs every electrical sensor and spark plug
ignition and fuel system its what give u the codes
when something gos bad
and if the ECU is bad the car may not start

Oct 07, 2011 | 2000 Hyundai Accent

1 Answer

I have a 2000, 1.5lt Hyundai Accent. I have just changed the ECU, with exact part number replacement. The key warning dash light flashes for 5 seconds. There is no fuel pump noise when ignition is switched...


The ECU has to be programmed to the car. Some places do this with the ECU out you will need the VIN number and the mileage. some places have to have the car and ECU to reprogram it. The flashes are for the security system. It is not sending the correct signal to the ECU, so it shut down the car.

Aug 29, 2011 | Hyundai Accent Cars & Trucks

1 Answer

2000 hyundai accent with error codes p0717 and p1529


P0717 - Input/Turbine Speed Sensor "A" Circuit No Signal
P1529 - Customer Snap Shot Request

  • NOTE_P1529 is a generic code which is issued by the TCU to tell the ECU to turn on the CEL. It means nothing by itself and is usually included with other TCU codes.

Aug 21, 2010 | 2000 Hyundai Accent

2 Answers

2000 hyundai accent wont start cuz no spark but put new fuel filter, spark plugs & wires, and a coil pack in. what else could it be?


itsounds like an immobillzer problem is the yellow key light on the instrument panel lighting up if not thats why there is no spark and i bet u dont hear the fuell pump running either

Mar 18, 2010 | 2000 Hyundai Accent

1 Answer

My hyundi accent wont start and the engine management light is on


I f you have ecu fitted,Itry disconnect positive lead on battery.Turn on ignition to get rid of any stored power .Pump brake pedal for about 20 secs(you will hear clicking in engine) when stops reconnect battery lead and try then

Dec 20, 2009 | 2000 Hyundai Accent

1 Answer

I have 2001 hyundai accent won't shift into o/d everytime.


Did the 'Check Engine' Light come ON? Whenever the 'CHECK ENGINE' light comes on, the ECU (Engine Control Unit) sets a Diagnostic Trouble Code (DTC). These codes identify the particular engine management system which caused the light to come on.
You'll need to use/find an OBDII (On-Board Diagnostic) Scanner to retrieve any code which have been stored in the ECU computer. Afterward, we might be able to help you DIAGNOSE and perhaps eventually fix the problem.

Oct 30, 2009 | 2000 Hyundai Accent

1 Answer

Faulty sensors in my hyundai accent.


Whenever the 'CHECK ENGINE' light comes on, the ECU (Engine Control Unit) sets a Diagnostic Trouble Code (DTC). These codes identify the particular engine management system which caused the light to come on.
You'll need to use/find an OBDII (On-Board Diagnostic) Scanner to retrieve any code which have been stored in the ECU computer. Afterward, we might be able to help you DIAGNOSE and perhaps eventually fix the problem.

Oct 28, 2009 | 2001 Hyundai Accent

2 Answers

2000 hyundai accent


It could be the crank sensor.It is a long shot that both coil packs would go out at the same time. Check to see if you have spark at cylinder #1 and cylinder #3. If you don't have spark at any plug, it might be the crank sensor. And that is located on the front of the block to the right of the exhaust manifold.
ALSO, check your fuse box inside the car. It will be on the left bank. ECU/TCU 10 amp fuse. Make sure that it's not blown. That is the problem I am tracking down myself.

Dec 28, 2008 | 2000 Hyundai Accent

1 Answer

2000 hyundai accent lost spark could it be crank sensor or ecu?


Hi, it should be the crank sensor that is bad. I never had to replace ecu on one of these but many sensors.

Dec 28, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
2000 Hyundai Accent Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...