Question about Cars & Trucks
If the gas gauge still works, the cluster is getting power. Unless the problem is at the connector in the back, you'll probably have to send it out to a shop for repairs or a rebuilt replacement.
The dealer will have a source for repairs.
Posted on Feb 07, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It's not the fuse. You need to jump start the diagnostic cable. First you need a battery of 9v and short the + and - terminal to the diagnostic cable. Then you will see smoke. After that it should work fine.
Posted on Feb 14, 2009
A bad electric connector is possible. A bad tank sending unit can cause the same symptom. Usually the sending unit is a reostat mounted inside the tank.. it changes resistance depending on the float position, the resistance change causes a different voltage to the gauge or signal processor. The reostat may be a resistive plastic strip, as the float moves a contact pointer wipes the length of strip thus the change in resistance and voltage. Clear as mud?
Posted on Apr 07, 2009
The servos in the speedometer go bad a lot in these. You can take a chance with repiar shops on line, or go to a dealer. runs $300 or less
Posted on Feb 10, 2010
Tips for a great answer:
Nov 02, 2016 | Chevrolet Cars & Trucks
Mar 26, 2014 | 2001 Chrysler Town & Country
Dec 28, 2010 | Ford Explorer Cars & Trucks
Feb 24, 2010 | 1997 Chevrolet Blazer
Feb 19, 2010 | 2004 Chevrolet Silverado 1500 Crew Cab
Jan 03, 2010 | 2000 Chevrolet Silverado
Jun 15, 2009 | 2003 Chevrolet Suburban 1500
Jun 04, 2009 | 1999 Chevrolet Silverado 1500
Aug 21, 2008 | 2003 Chevrolet Suburban 1500
Apr 22, 2018 | Cars & Trucks
63 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: