Question about 2006 Ford Bantam 1.6i

Open Question

Ford bantam 1.6 xlt rocam

Smokes blue coullerd smoke , heavy on fuel and doesnt have a lot of power

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1348 Answers

SOURCE: blows lots of black smoke if back fire knocking smell of fuel in

are you losing coolant? ford had a huge problem with that engine,and the coolant eats the main bearings.
the defect is in the EGR valve setup.
check with ford,they are aware of the issue,there are thousands of them

Posted on Sep 01, 2009

  • 1 Answer

SOURCE: I HAVE AN FORD BANTAM

Anyone with a solution yet?

Posted on Nov 01, 2011

  • 1 Answer

SOURCE: I have ford bantam 1.6i rocam 2006 model. It Doesn't start, It doesn't pump the petrol, the is no power to fuel pump

Refer to your manual there is a switch that deactivated the fuel pump in case of accident, there is a switch by the pasangers feet that if in the up position is activated to stop the fuel...

Posted on Aug 30, 2012

  • 1 Answer

SOURCE: ive got a 2006 Ford Bantam 1.3i RoCam engine. The

there is a switch under the cover between the dash and carpet left hand there is a hole put your finger in and press the switch down

Posted on Sep 21, 2012

emissionwiz
  • 75822 Answers

SOURCE: diagram how to replace fan belt on ford bantam rocam engine 1.6

Here is the diagram I show.
9_28_2012_8_40_43_pm.jpg

Posted on Sep 28, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford bantam rocam high idling and smokes when you start for 5 min then smoke dissappear


What kind of engine is this? We do not have this model in the USA so hard to find fixes for them.

Jun 24, 2016 | Ford Cars & Trucks

1 Answer

Where are the speed sensor situated on a Ford Bantam 1.6 rocam


It is plugged into the transmission where the speedo cable would go in older cars.

Jun 22, 2016 | 2008 Ford Bantam 1.6i

1 Answer

Ford bantam1.6i xlt rocam 2006 .the idling does not stay level it goes up and down


If the battery has just been replaced or discharged this could be normal.

With a battery disconnect the learned calibration of the cars computers are reset to factory settings including idle,

The car needs to relearn the idle and running settings. It can take several minutes and driving for this to occur. The car will in many cases want to stall during this learning cycle.

Note this problem usually will only occur during battery replacement or discharge.

If not associated with a battery disconnect then borrow an OBDII scanner and read the codes. If the car is derivable take it to your friendly auto parts store for a complementary scan tool code readout. The computer information will lead you to the likely sensor culprit.

Hope this helps?

Feb 27, 2015 | 2006 Ford Bantam 1.6i

1 Answer

How do I replace a timing belt on a Bantam 1.6i XLT


if it rocam engine it does not have a belt it runs on a chain

Aug 20, 2014 | 2008 Ford Bantam 1.6i

1 Answer

Ford 1 3 rocam engine


bantam?
most cars, MPI injection the injector form a sandwich.
between the fuel rail, and the intake front tunnel tubes.
so remove the rail,
step s
remove battery neg lug, so some, odd person dont try to start car.
depressurize the fuel system per FSM.
then remove injector conn plugs.
the unbolt rail. bingo.

the FSM covers this, ask ford parts counter for this book.

The Ford Bantam is a coupe utility vehicle ("bakkie", "pickup", or "ute") produced by the Ford Motor Company in South Africa. It spanned into three different models and was produced in South Africa for the local market.

be safe.

Jul 09, 2014 | 2005 Ford Bantam 1.6i

2 Answers

My ford bantam has blue smoke from the exhoust what does this mean


blue smoke from any internal combustion engine indicates it's burning oil along with the air/fuel mixture........this can be caused by gaskets or seals. in higher mileage engines it can be caused by worn internal parts

Apr 21, 2014 | Ford Bantam Cars & Trucks

1 Answer

Ford bantam does not start


Check the reset switch near yo icu. reset it if off

Mar 16, 2013 | 2005 Ford Bantam 1.3i

2 Answers

I have ford bantam 1.6i rocam 2006 model. It Doesn't start, It doesn't pump the petrol, the is no power to fuel pump


Refer to your manual there is a switch that deactivated the fuel pump in case of accident, there is a switch by the pasangers feet that if in the up position is activated to stop the fuel...

Aug 28, 2012 | 2006 Ford Bantam 1.6i

1 Answer

I have a 1990 ford ranger xlt that blows out smoke from tailpipe its white with blue in it the mass airflow sensor doesnt do anything when un plugged it has a miss to its a 2.3 liter engine


Sounds like you have a blown head gasket - white smoke = coolant. Pull plugs and look for "steam cleaned plug" or for coolant in oil - looks milky.

Mar 20, 2011 | 1990 Ford Ranger SuperCab

Not finding what you are looking for?
2006 Ford Bantam 1.6i Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...