Question about Cars & Trucks

Open Question

Online chat TOYOTA RAV4 1ZZFE NO SPARK IN THE PLUG NUMBER 1 AND NUMBER 4

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mick-40
  • 94 Answers

SOURCE: sequence for spark plug leads on a vw polo 1.4 1996

Hello darren625, the firing order will be 1-3-4-2, #1 will be at the front of the block,I am not familiar with volks wagon but you can disconnect the power (to be safe) turn the engine over by hand with plugs out for ease use a piece of stiff wire or small screwdriver in the #1 plug hole and you will feel the piston come up make sure it is on the compression stroke (you will feel air escape) when it is at the top before it starts to travel down that will be tdc (top dead center) the rotor will now be in line with #1 connect wires as per firing order and you should be good to go,hope this helps, good luck

Posted on Nov 11, 2008

stevenhurc
  • 450 Answers

SOURCE: dont know which one is number 1 spark plug daewoo espero cd 1995

the cylinder closest to the camshaft cover right side of vehicle

Posted on Jun 29, 2009

  • 107 Answers

SOURCE: number 1 spark plug for 2000 Mazda MPV

The cylinder order is 1,2,3 (rear row, left-to-right) and then 4,5,6 (front row, left-to-right).
When replacing spark plug wires or plugs, it's very helpful to do one at a time to avoid connecting them incorrectly.
Hope this helps, Sherwin

Posted on Dec 29, 2009

  • 458 Answers

SOURCE: were is spark plug number 1 at on my 3 cylinder geo metro

On GM inline engines,cylinder #1 is the one closest to the front(pulley)end of the engine. If you pulled the wires off the distributor/coil pack,and don't know where they go,put one wire one at a time and crank it.If it doesn't backfire,repeat until it starts.(this is only easy on 4 cylinder or smaller engines)

Posted on Jan 01, 2012

Testimonial: "thanks that will help me fix my problem"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I saw your answer to a question, about a Toyota Camry having a fuel pump reset switch in the trunk! Is there really one there, because nobody else seems to know this? Thanks


    images for Toyota Camry fuel pump reset switch



    More images for Toyota Camry fuel pump reset switch

    Toyota Camry fuel reset button Questions & Answers - Fixya

    www.fixya.com > ... > Tags > fuel reset button > Cars & Trucks > Toyota
    fuel pump reset button My car is not getting any fuel and I have been told that there is a fuel pump reset button or fuse but I am unable to locate it. If there is such ...

    Toyota Camry fuel switch location Questions & Answers ...

    www.fixya.com > ... > fuel switch location > Cars & Trucks > Toyota
    Toyota Camry cars & trucks fuel switch location questions and answers. Ask your ...Where is the fuel pump reset switch on a 96 toyota tercel? ... fuel pump switch ...

    How to Reset a Fuel Pump Shut Off Switch ' eHow

Jan 07, 2016 | Toyota Cars & Trucks

1 Answer

Ok if I get a scanner reading on a 1998 Toyota Camry LE 2.2 liter did the number 1 and number for spark plug wires are failing what would be the problem is it the wires or oil or something else


possibly what is called a misfire, could be plug, bad wire, fuel injector, or oil or water getting to plug. majority of time it is bad wires and/or plug

Apr 01, 2015 | 1998 Toyota Camry

1 Answer

Step by step instructions on how to change the spark plugs on my 2006 Toyota Corolla


Obtain manufacturer recommended spark plugs for your vehicle with proper gap (.044 from toyota forum)
3/8 drive ratchet with extension and spark plug socket.
Only perform spark plug change on a COLD engine.
Remove one spark plug boot at a time, so as not to confuse wire location.
Remove spark plug number 1 and replace with new one, recommended torque is 150 inch/lbs from toyota forum, but if you don't have a torque wrench, just snug them up good, don't overtighten.
Same procedure 2,3 and 4 cylinders

Aug 17, 2014 | Cars & Trucks

1 Answer

Anyone have picture/illustration of where the spark plug are located on a 2005 highlander?


  1. 1 Pull the hood release and raise the hood on the Highlander. Allow the engine plenty of time to cool.
  2. 2 Remove some components to reach the spark plugs. On a 3.3 liter engine, unscrew and remove the V-bank cover and intake air tank. On a 2.4 and 3.0 liter engine, remove the number one engine cover.
  3. 3 Locate the ignition coils and spark plug wires that connect directly to the spark plugs or directly to the engine in the Toyota Highlander. In 2001 and 2002 models, theses are on the front and back of the engine. On models made after 2002, the spark plugs are along the sides. Grab the ignition coils or spark plug wires by the thick plastic piece at the end of the wire. Squeeze the end and turn it to release it from the spark plug. Pull back to remove the plug from the engine.
  4. 4 Slide the spark plug socket over the spark plug. The most common size of spark plug socket used on a Toyota Highlander is 16mm. Turn the socket to the left to unscrew and remove the spark plug from the cylinder well.
  5. 5 Apply a thin coat of anti-seize compound to the spark plug thread and into the wire boot to reduce the chance of sticking.
  6. 6 Insert the spark plug into the well and manually turn the plug into place. If you cannot reach the plug well manually, insert the plug into the socket and extension and use the extension to turn the plug into place. Do not use a socket wrench or flexible extension for this process because their force damages the spark plug.
  7. 7 Connect the ignition coil or spark plug wire to the spark plug. Turn to lock it into place.
  8. 8 Continue this process for the rest of the spark plugs. Replace any removed items onto the engine and lower the hood.

Read more: How to Replace Spark Plugs in a Toyota Highlander ' eHow.com http://www.ehow.com/how_4484644_replace-spark-plugs-toyota-highlander.html#ixzz1C6Y4k5y2

Jan 26, 2011 | 2005 Toyota Highlander

1 Answer

Giving a 300 and a 301 code where do i start sounds fine when started and then when you put in gear it start misfiring


P0300 - Random / Multiple Cylinder Misfire Detected

Possible Causes:
- Improper spark plug
- Insufficient compression
- Incorrect fuel pressure
- The injector circuit is open or shorted
- Fuel injectors may be faulty
- Intake air leak

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plugs
- Replaced Injectors
- Replaced Ignition Coils

P0301- Cylinder Number 1 Misfire Detected

Possible Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak at cylinder

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

Most likely your issue is with cylinder number 1. Follow the info I have provided and you should be able to solve this issue.

Jan 14, 2011 | 2002 Toyota Tacoma

1 Answer

I have 3 coils on one side of engine and wires going to other side. i need to know where they go. replacing spark plug wires on 1997 toyota avalon 3.0 v6


TRY THIS FRONT 3 CYLINDERS FACING YOU LEFT TO RIGHT 2 4 6 AND BACK CYLINDERS LEFT TO RIGHT 1 3 5 NOW TAKE THIS NUMBER 5 1 3 THIS IS SPARK PLUG WIRES LOCATION FROM LEFT TO RIGHT.PUT PLUGS WIRES TO THE 3 BACK CYLINDERS IN SAME ORDER YOU SEE NUMBER.LET ME KNOW WHAT HAPPENS.

Dec 29, 2010 | 1997 Toyota Avalon

1 Answer

I need a spark plug wiring diagram for a 1992 Toyota Camry, 4 cylinder, 2200 motor.


I believe your firing order is 1-3-4-2. You may see a number 1 on the distributor cap on this vehicle. That is the #1 plug wire. The wire hole next to that would go to spark plug 3 etc. Easiest way is to change wires one at a time. Hope this helped.

Mar 29, 2010 | 1992 Toyota Camry V6

1 Answer

Plugs


Changing the spark plugs is a pretty easy task. The spark plugs run along both sides of the engine, 1 per cylinder. (3 on each side) You can easily identify them by the plug wires running to them from the distributor. Pop off each plug wire, (1 at a time) and replace the spark plug. Once you have replaced the plug, replace the plug wire. This ensures that you dont mess up the sequence of the wires which determines which cylinder fires at what time in the cycle. VERY important not to mess up the sequence. If you should happen to get the wires mixed up, look online for the firing sequence for your vehicle and engine.

Dec 30, 2009 | 2006 Toyota Tacoma

1 Answer

Need spark plug wiring sequence, 1985 toyota corolla 1600 2 door hatchback, rear wheel drive


With the 2T-C, 3T-C, and 3K-C engines the Firing Order is 1-3-4-2
The distributor rotates ->Clockwise. (The rotor actually)

Number 1 spark plug tower on the distributor cap, faces directly towards the engine. Number 2 faces the back of the engine, Number 4 faces the front of the engine, Number 3 is to the outside away from the engine.

Number 1 spark plug is at the front of the engine. 1-2-3-4

With the 4A-C engine, and other A-Series, the Firing Order is 1-3-4-2
The distributor rotates ->CounterClockwise.

Number 1 spark plug tower is towards the engine, and faces the back of the engine. Number 3 spark plug tower is away from the engine, and faces the back of the engine.
Number 2 spark plug tower is towards the engine, and faces the front.
Number 3 spark plug tower is away from the engine, and faces the front.

Aug 16, 2009 | 1985 Toyota Corolla 2 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...