Question about 2000 Honda Civic

1 Answer

Ran out of petrol now it wont start

I ran ot of petrol in my mg zr now it wont start

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 20,706 Answers

Prime it.
try key on 10 time? (on, off, on....)
if the pump dont run keyon,(1/2 cars down) then it must be cranked to prime,or on some cars there is a DLC connector under hood
for pump hotwiring for just this. (oops 2000 dont have it...)
btw : the pump is fuel lubricated and cooled with fuel so you might have fused it (melted it guts out ) running it dry. dont.

id use a pressure gage to see if i could get spec pressure now.
alldata.com has the steps here.

check 12vdc to fuel pump
check all fuses. #13 and #31

Posted on Feb 07, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get code for mg zr


The best way to get the detail you want is to send all the details you can possibly find. Send them to the "MG" register in the UK, which is part of the "MG' Owners Club

Nov 29, 2014 | MG Cars & Trucks

1 Answer

My mg zr has no spark 1.8vvc160 tuns over


because you have changed the head gasket I am thinking that there is a valve timing problem. If at any stage you turned the crank when the head was removed and refitted the head and cam shaft
and turned the crank to align the marks then there is a distinct possibility that there is valve damage. Do a compression test. Turning an engine by hand is difficult because each piston will have compression.

Nov 18, 2014 | MG Cars & Trucks

2 Answers

Why won't my mg zr start?


you may have sucked up dirt from the fuel tank when it ran it of gas. replace the fuel filter to see if this works. also the fuel pump may have a plugged pickup filter on the pump itself or the pump may have just died, not supplying the proper pressure in the system.

Aug 24, 2014 | 2005 MG ZR

1 Answer

Mg zr common faults


Bad cabling.
You need to check earth for the motor.
If you are getting bad earth then it will overload the fuse.

Jul 11, 2014 | 2005 MG ZR

1 Answer

I only have first gear


i ran out of petrol in my mg zr 120,now it wont start but engine turns over ok

Feb 07, 2014 | 2000 Honda Civic

1 Answer

How to re set immobaliser on 2004 MG ZR


We can help with that but you will have to contact us direct . You can try removing the negative lead for a minute or two and that may work. Failing that email us info at remobilise dot co dot uk

Apr 07, 2013 | MG ZR Cars & Trucks

1 Answer

Mg zr ran out of fuel now runs rough till it gets warm


Change fuel filter and clean the injectors

Feb 26, 2013 | Cars & Trucks

1 Answer

Zs mg rover fan heater risistor not working just not getting no electric feed to it and the fuse is ok.


A very common fault this one, that is easily fixed. On older cars the heater fan speeds one and two often fail, due to the resistors burning out. This applies to most of the MG Rover cars of the 90's and 2000's so Rover 200, 25, 45, 400, MG ZR, ZS, MGF and MGTF.
Buy three bigger resistors of value 0.68 ohm and wattage 10 watts, from eBay or an electronics store.
Most of the video here is an MG ZR, apart from the MG TF at the start but it is similar for all models. The MG TF took marginally longer due to the slightly more hidden location of the resistor pack. You need to remove a short vent pipe as well as the glovebox cover on that car.

Oct 09, 2011 | Cars & Trucks

1 Answer

MG ZR engine problems


hi i have a 1.8 mg zr and when i come two junctions it seems two revs few times then sits at 2000 revs cane any one help ma

Jan 19, 2010 | 1999 BMW 323 Series

Not finding what you are looking for?
2000 Honda Civic Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...