Question about 1997 Volkswagen Eurovan

Open Question

Torque settings 2.5 vw microbus - 1997 Volkswagen Eurovan

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
TDISLine
  • 1874 Answers

SOURCE: how to check if vw 1996 microbus radiator is

You must remove the bottom rubber hose from the radiator, and also the upper hose. Extract the radiator out or simply flush the radiator in reverse direction of water flow. If the radiator is clogged you can try to clean inside (chemically) or replace it. Flush the cooling system in reverse direction of water flow. Refit all in reverse order and after that purge air out of cooling system.

Posted on Dec 05, 2009

Ad
  • 271 Answers

SOURCE: What is the Torque setting for Sump Plug VW T25

25Nm

Posted on Apr 26, 2010

johnjohn2
  • 5763 Answers

SOURCE: VW Microbus 2.3I Transmission problems

You can try to adjust the clutch cable if it has a cable, if its hydrualyic clutch then i would say theres a problem with the clutch plate or preasure plate, but first check the fluid level in the clutch master cylinder if its low then you may have a leak, most of the time its the slave cylinder or master that leak, the master is what the clutch pedal pushes which inturn send fluid to the slave cylinder at the trany which pushes the cltuch fork,so start by seeing if its hydraulic which i think it is. then fluid check if low check for leaks.

Posted on Jul 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Microbus 2.3i vw cylinder head torque settings needed


must use new bolts
1st torque-30nm
2nd torque-50nm
next
90 degrees
90 degrees

Feb 23, 2016 | Cars & Trucks

1 Answer

2.6i engine torque settings, for vw microbus


Visit the on-line store, know as reliable-store, they have the parts manuals. I'm sure you will get the solution of your problem
Best Manuals

Oct 20, 2014 | Cars & Trucks

3 Answers

I need to kno the cylender head torque specs for a 2.3i vw microbus five cylender


The Audi 5 cylinder engine (Engine code AFU) was mainly produced in South Africa and was called a Microbus. The engine capacity was 2309cc. The Microbus 2.3i T3 was produced from 1992-2002.

According to Mead & McGrouther - Data Digest the torque settings for the cylinder head bolts are as follows: 40Nm + 60Nm + 90'degree turn + 90' degree turn. The cylinder head bolts has to be replaced with brand new ones.

The Main Bearings: 65Nm. The Big Ends: 30Nm + 90 degree turn.

The OHC Bearing Caps: 20Nm.

Flywheel Bolts Manual transmission: 60Nm + 90 degree turn.

Jul 28, 2014 | Cars & Trucks

1 Answer

Flasher relay location on vw microbus 1995 model


Flasher relay Location on microbus 2,5

Nov 26, 2013 | Cars & Trucks

1 Answer

I want to change timing belt for microbus 2.6 but i am not shore about the mark on the cam


We do not have micro bus here, but i can tell you that a timing component kit comes with a small book with marks and some directions, another way is to line engine up at top dead center and mark gears before removal, Note; all gears must be line up correctly or engine damage will occur. after you install the timing belt spin crank pulley 2 revolutions and all marks should line back up, if not then realign,

Sep 30, 2012 | Cars & Trucks

1 Answer

What is the cyl head torque setting for 05 vw golf 1.4 fsi 16v


Cylinder head instructions

tdisline_358.jpg
Cylinder head torque setting for 2005 VW Golf 1.4 FSI
Renew bolts
Stage 1 = 30 Nm
Stage 2 = 90 degrees
Stage 3 = 90 degrees

Mar 23, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

How to check if vw 1996 microbus radiator is


You must remove the bottom rubber hose from the radiator, and also the upper hose. Extract the radiator out or simply flush the radiator in reverse direction of water flow. If the radiator is clogged you can try to clean inside (chemically) or replace it. Flush the cooling system in reverse direction of water flow. Refit all in reverse order and after that purge air out of cooling system.

Dec 05, 2009 | 2005 Volkswagen Microbus

2 Answers

Vw 2.6 immobiliser


My vw caravelle bus 2.6i -1996 model cant start- just cranking but not firing, cant hear the pump click as usual. It was just running fine, then switched off, when i got back all these started. kindly assist.

Dec 04, 2008 | 2005 Volkswagen Microbus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...