Question about Ford Focus
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: DRIVER SIDE WINDOW OFF TRACK
you must pull door panel off (you can find the tool at any parts deals) then lift the window up with hands only it is hard but can be done get some one to hold the window glass up and check to see if any parts have fall if so put back on or replace. if not missing clean track and crank up to glass and line up. wind up and down to make sure it stay and then re-place door panel. hope this works it did for me on my 95 contour
Posted on Jul 05, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanics.
Posted on Sep 29, 2009
gently pry the triangular speaker piece off the top there will be a screw under the handle, in the armrest of the door and around the edges most of the screws will have a plastic cover on them that pop off with all the screws out gently pry around the edge of the panel there will be 7-10 plastic push pins take your time they wont come out very easy but if you hury you could break the door panel once its free on the bottom and sides lift upward on the panel there will be a ledge the top hooks over on re-install make sure the edge is all the way over to have a good seal hope this helps good luck
Posted on Mar 17, 2010
Tips for a great answer:
Jul 29, 2016 | 2003 Honda CR-V
Dec 15, 2013 | 2003 Chevrolet Malibu
Jul 13, 2013 | 2005 Jeep Grand Cherokee
Jan 18, 2011 | Acura RSX Cars & Trucks
Apr 01, 2010 | 2003 Mazda MPV
Jan 25, 2010 | 2002 Chrysler Concorde
Jan 02, 2010 | 2001 Ford Expedition
May 14, 2009 | 1991 Nissan Maxima
Nov 06, 2008 | 2000 Mitsubishi Mirage
12 people viewed this question
Usually answered in minutes!