Question about Cars & Trucks

Open Question

Steering column view

Good Morning Hope you can help me ,I am looking for a left side chassis bracket for a Nissan 1400 bakkie 2006 model, where the stabiliser arm attaches to, mine were torn due to a pothole the bracket is welded on to the chassis Kind Regards Tienie Nel 0792942015

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
thutson66
  • 96 Answers

SOURCE: turn signals and hazard flashers quit working

There are two possible locations for the relay.

First in the fuse panel, close to the bottom.

Second, in some models they put the darn thing behind the dash in the center of the car, it's a real pain to get to if it's that one.

Good luck

Posted on Aug 05, 2008

Ad
  • 95 Answers

SOURCE: 1985 ford F150: Turned key to start my truck, and

It may be the 'actuator'. It is a rod that connects the lock cylinder to the ignition switch on the tilt wheel units. It is made of aluminum and often breaks as things become worn.

Posted on Jun 23, 2009

  • 137 Answers

SOURCE: My interior rear view mirror fell off. How do I

Well known issue on VW cars.Try to use 2 component glue to fix it like Diamant or Epokit.You may need to create a holder while glue goes off.

Posted on Jul 15, 2009

  • 10 Answers

SOURCE: where can i find a workshop manual for a nissan

nissan website or nissan dealer

Posted on Jul 19, 2009

yourpc
  • 190 Answers

SOURCE: I NEED A NISSAN 1400 BAKKIE FUSE BOX WIRING

I get files from www.pdftown.com I have been able to download manuals for several of my cars there. Hope this helps...

Posted on Sep 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair steering freeplay on nissan bakkie 2002 1400


Depends on where the free play is coming from. Put car front end up on stands and have helper wiggle the steering wheel while you look for where the free play is.

Feb 26, 2016 | Nissan Cars & Trucks

1 Answer

How do I set tappets on Nissan 1400


With a special tool called a feeler gauge remove the valve covers and one by one bring the cylinders up to top dead center (both valves are fully closed at this point) adjust to factory spec. All adjustments are done cold. If engine is very high miles reduce the clearances in specs by slight amount (.002") to the tight side to account for wear in the valve train parts.

Nov 16, 2015 | 2006 Nissan 1400 Bakkie

1 Answer

My heater on my Nissan 1400 bakkie stays on warm, moving the arm to "Off" does not help


Hi Johan, I believe the problem will be with either the operating cable or the heater control valve. Sometimes WD40 can work wonders on both, but each should be removed before being sprayed. If the cable or vave is damaged, replacement will be required. Regards John

May 23, 2014 | 2006 Nissan 1400 Bakkie

2 Answers

Where is the flasher unit on a nissan sentra 1990


1990 Nissan/Datsun Sentra 1.6L FI SOHC 4cyl the Flasher is located front seating area, driver side, under dash, driver side of brake pedal, mounted on support bracket.

Hope helps.

Mar 31, 2011 | 1990 Nissan Sentra

1 Answer

How to remove a heator core from a 2001 dodge caravan? do you have to take the dash out? or just the bottom pannel.


The 2001 Dodge caravan has 2 heater cores - front (the main one), and the rear. Removal of the
rear heater core is a whole different procedure than the front.

Front Heater Core - Removal and Installation
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Align the wheels in the straight-ahead position.
  3. Disconnect the negative battery cable.
    CAUTION Before working around the steering wheel or the instrument panel all 2 minutes to pass to allow the air bag module to discharge.
  4. Drain the cooling system into a clean container for reuse.
  5. Remove the steering column, by removing or disconnect the following:

    Lower left side steering column cover Parking brake release cable from the parking brake lever 10 steering column cover liner-to-instrument panel bolts and the cover liner
  6. Rotate the key to the LOCK position; then, rotate the steering wheel to the LOCKED position.

    Gear selector cable and its mounting bracket as an assembly from the upper steering column mounting bracket 2 instrument cluster trim bezel-to-instrument panel screws, retaining clips and bezel 2 steering column shroud-to-steering column screws and the shroud Steering column-to-intermediate steering shaft coupler
  7. Loosen but do not remove the 2 lower steering column mounting bracket nuts/washers.

    2 upper steering column mounting bracket nuts/washers Steering column assembly from the vehicle
  8. Remove or disconnect the following:

    Instrument panel-to-chassis harness interconnect and bracket Lower silencer boot, at the base of the steering shaft
  9. Working in the engine compartment, pinch off the heater hoses.

    Heater core cover. Position some towels under the heater core hoses. Heater core plate and the hoses
  10. Depress the heater core retaining clips.
  11. Lift the accelerator pedal and slide the heater core past it.
  12. Depress the brake pedal and remove the heater core from the heater/air conditioning housing assembly.

    0996b43f8022fa83.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the steering column assembly


    0996b43f8022fa84.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the interconnect and bracket


    0996b43f8022fa85.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the front heater core assembly


To install:
  1. Depress the brake pedal and install the heater core into the heater/air conditioning housing assembly.
  2. Lift the accelerator pedal and slide the heater core past it.
  3. Install or connect the following:

    Heater hoses (using new O-rings) and the heater core plate Heater core cover Heater hoses clamps, working in the engine compartment Lower silencer boot at the base of the steering shaft Instrument panel-to-chassis harness interconnect and bracket
  4. Install the steering column assembly by installing or connect the following:

    Steering column assembly, carefully into the vehicle. 2 upper and 2 lower steering column mounting bracket nuts/washers. Torque the nuts to 105 inch lbs. (12 Nm). Steering column-to-intermediate steering shaft coupler and tighten the pinch bolt to 21 ft. lbs. (28 Nm) 2 steering column shroud and the shroud-to-steering column screws Bezel, the retaining clips and the 2 instrument cluster trim bezel-to-instrument panel screws Gear selector cable and its mounting bracket as an assembly to the upper steering column mounting bracket 10 steering column cover liner and the cover liner-to-instrument panel bolts Parking brake release cable to the parking brake lever Lower left side steering column cover. Lower left side steering column cover
  5. Refill the cooling system.
  6. Connect the negative battery cable.
  7. Run the engine to normal operating temperatures; then, check the climate control operation and check for leaks.

Jan 02, 2011 | 2001 Dodge Caravan

3 Answers

Heater core


18901fc.gifHere is an exploded view of the heating/air conditioning blower box. This contraption is located on the passengerside under the dash. I've changed heater cores on other cars but never worked on a caravan so not sure how difficult it'll be. You may need to remove a few cover panels to access this and the heater core #22 is located behind the distribution box #6 containing parts 7-18 and hopefully comes off as a unit. I wouldn't want to put it back together just looking at the pic. You may just need to remove the heater tube cover #4 to access the connections and slide out the core.....NAH couldn't be that simple!!! Hope this was of some help. Good luck.













Oct 18, 2008 | 2000 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...