Question about Suzuki Forenza
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
possibly the cruise cancel switch on the brake master cylinder is shorted, disconnect the switch and replace the fuse and see if everything comes back to life. the switch may be on the end of the master cylinder, Ford has had BIG problems and RECALLS for this switch going bad.
Posted on Sep 23, 2009
the fuel pump and radio are not on the same circuit, most liokely the fuel pump is shorted, that is the most common cause, get under the truck and disconnect the fuel pump connector at the tank, if the fuse doesn't blow then u need a new pump.
Posted on Dec 05, 2009
it is probably the wiper motor,its building up to much resistance and blowing your fuse
Posted on Jan 26, 2010
Testimonial: "thank you thats kinda what i figured i just wanted someone elses opinion thank you =)"
I would trace the wire from the horn and see if it was inadvertently damaged when the alternator was installed. If you have a voltmeter, you can remove the horn fuse and check to see if there is continuity between the horn (non hot side) of the fuse and the car body. This would indicate a short in the wire running from the fuse box to the horn. You can also look around the alternator mounting area to see if any wires are being pinched. Hope this helps. Good luck!
Posted on Mar 10, 2010
Tips for a great answer:
Jan 05, 2016 | Suzuki Cars & Trucks
Feb 14, 2015 | 2008 Suzuki Grand Vitara
Mar 04, 2014 | 1994 Buick Century
Jun 25, 2012 | Chevrolet Cobalt Cars & Trucks
May 01, 2011 | 1999 Mitsubishi Montero Sport
Feb 03, 2010 | 2006 Ford Focus
Dec 09, 2009 | 2003 Hyundai Accent
Mar 25, 2009 | 2008 Suzuki SX4
Jan 19, 2009 | 2001 Hyundai Sonata
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: