Question about Renault Cars & Trucks

Open Question

Remove outside door handle

2011 renault fluence. trying to take off lh front door outer handle. have looked through hole on inner edge of door but cant see a screw. any more info?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: how do i remove the outer rear door handle on a 07 audi Q7

Ok
Remove plastic plug on the inside of door there is 10 mm hole use a hooked pick set pick put through the hole and pull the plastic cir clip towards the back of the door that will release the smaller part of the outer handle then the handle itself can be taken out.this is so simple but so deceiving the actual cir clip is hard to notice because of all the plastic **** on the inside backing plate the cir clip is just on the inside of hole look hard it is 2mm thick & 20mm high (black plastic) place point of pick in between backing plate & cir clip hook it and pull back the front door is based on the same principle but is a lot easier

Posted on Jul 16, 2009

Ad
  • 1986 Answers

SOURCE: How do I fix a broken outer door handle on he drivers side?

Is there anything connecting the handle to the door latch assembly? Is the lock cylinder in the key hole and secured? It just sounds like the linkage may have slipped off the door handle

Posted on Aug 17, 2009

  • 286 Answers

SOURCE: i am trying to take the door handle off, but cant

The window winder (if applicable) and door pull handle and maybe the door button on top of door panel, interior pull handle and that's about it. Majority of panels are held in by a pop button fixing and a firm tug will release.Good luck

Posted on Apr 05, 2010

  • 84 Answers

SOURCE: outer driver door handle does not operate.

need to take inner door panel off - the linkage has come off.
you need to buy a tool to take the panel off the right way.

Posted on Mar 25, 2011

sfparker
  • 170 Answers

SOURCE: trying to change inner and

hard to open door? it's probable not a handle problem, it is more like the door hindge bushings need replacing

Posted on Sep 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does anyone have the engine torque settings for my 2010 Renault Fluence 1.6 16v H4M (same as Nissan HR16DE) engine


2009 Renault Fluence 1.6 16v Automatic specifications ...

www.carfolio.com/specifications/models/car/?car=209924
Mar 15, 2010 - 2009 Renault Fluence 1.6 16v Automatic automobile specifications & information. ... dimensions and weights, engine power and torque, and general data ... Buick Excelle 1.6 2010 MY · Buick Excelle 1.6 Automatic 2010 MY ...

2009 Renault Fluence 1.6 16v specifications, information ...

www.carfolio.com/specifications/models/car/?car...

Translate this page Mar 15, 2010 - bodywork; dimensions & weights; aerodynamics; engine; performance ... Baojun 630 · Buick Excelle 1.6 2010 MY · Buick Excelle 1.6 Automatic 2010 MY .... The Renault Fluence 1.6 16v is a saloon (sedan) with 4 doors and a front ... For this model it musters power and torque figures of 108 bhp (110 PS/81 ...

Dec 14, 2015 | Nissan Cars & Trucks

1 Answer

Passenger door handle broke of the outside of Nissan pathfinder, now the door wont open from the inside or out. how can we get the door open?


Remove the door's inner (interior) panel and inspect the trailing edge of the inside of the door. You should be able to see the door linkage from both the inner door handle and (what's left) of the outer handle (try moving the inner handle to see how the linkage is routed. I suspect that when the outer handle broke, its linkage dropped onto the inner handle's linkage and jammed it. With a long screwdriver, try moving the inner handle linkage to release the door latch and then replace the outer handle and its linkage (a salvage yard may be the best source and a Mitchell body repair manual should show hoe the linkage is routed and attached. Good luck.

Oct 10, 2013 | Cars & Trucks

1 Answer

How to remove exterior door handle 2011 vw jetta


Open door and look where striker is,just above striker towards outer door is a black plastic insert,remove that,looking inside the smaller hole is a little black bar,with a hook pull bar towards yourself,will only move very little,then go to outside of door and pull handle out like to open,and pull the stationary part of handle out,let go of handle,slide handle out towards back of vehicle.

Jan 18, 2012 | Volkswagen Jetta Cars & Trucks

1 Answer

Need to remove outer door handle on an 2009 vw cc.


you need to remove the inner door panel,, you will see a sheet of plastic under that ,, peel it away , look inside the holes on the inner metal door structure,, towards the outside handle,, you will see connecting rods that control the functions, they are held on with little plastic clips,, remove those from the handle side , ( the piece you want to take off, ) there should either be one small bolt head , ( possibly 2 one on each side, the one with just one, has a tab that slides into place on that one) remove that bolt, and the handle will slide off to the outside of the vehicle , make sure to make a note of where each rod goes, and the clips that hold them,

Sep 23, 2011 | 2009 Volkswagen CC

1 Answer

Need info for outer door handle R & R 2011 vw Tiguan.


1. Open the door.
2. on the door appature above the lock mechanism toward the outer skin of the door you should see two holes one ovalish shaped and one round shaped.
3. pry covers off circular hole (inner).
4. insert hook type tool (if you dont have one make one by putting a cheap small flathead scredriver in the vice and bending it into a small L shape at the end about 5mm.
5. pull latch mechanism loose (you will have to look for the latch with a small light or feel around for it.
6. put outer door handle capping (the stubby part) out by prying off gently and then wiggling.
7. slide main part of door handle toward newly exposed hole created by removing capping and then remove.

8. thank me for saving you from tearing your hair out. If we all bought Japanese we wouldent have these ****** problems.

Sep 20, 2011 | 2009 Volkswagen Tiguan

1 Answer

Need instructions to replace the passenger side mirror and the driver side tail light on a 1999 Ford Taurus 4-door sedan. Thank you, Gary S.


Section 01-09: Mirrors, Rear View 1999 Taurus/Sable Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/25/1998 Mirror, Power-Outside Rear View Removal
  1. Disconnect battery ground cable (14301).
  1. Remove front door trim panel (23942). Refer to Section 01-05.
  1. Remove radio speaker grille from cover assembly by squeezing or pinching between thumb and index finger.
  1. Remove two screws from cover assembly.
  1. Disconnect outside rearview mirror wiring connector (C515-LH; C615-RH). Remove wiring guides as necessary.
  1. Remove three outside rear view mirror retaining nuts. Remove outside rear view mirror (17682) while guiding wiring and connector through hole in door.


an0786b.gif


Item Part Number Description 1 17682 Outside Rear View Mirror 2 N621906-S36 Nut (3 Req'd) 3 F8DB-17D699-
AAW Cover Assembly Rear Substrate-LH 3 F8DB-17D698-
AAW Cover Assembly Rear Substrate-RH 4 N808968 Screw 5 F8DB-18B984-
AAW Speaker Grille-Standard (No Badge)-LH 5 F8DB-18985-
AAW Speaker Grille-Standard (No Badge)-RH 5 F8DB-18K901-
BAW Speaker Grille-Mach-LH 5 F8DB-18978-
BAW Speaker Grille-Mach-RH 5 F8DB-238A35-
AAW Speaker Grille-Blank (No Speaker)-LH 5 F8DB-238A34-
AAW Speaker Grille-Blank (No Speaker)-RH A - Tighten to 6-8 Nm (54-70 lb-in) ------------------
Trim Panel, Door Front
Removal
  1. Remove cover behind inside door handle.
  1. Remove screw from bottom of pull cup retaining front door trim panel to front door (20124).
  1. Remove three screws retaining front door trim panel to front door.
  1. NOTE: Do not attempt to remove more than one pushpin at a time.

    Using Rotunda Windshield and Molding Trim Removal Kit 107-R0401 or equivalent, remove the door trim panel by pulling one door trim panel pushpin at a time from the inner door skin.
  1. Disconnect electrical connectors as necessary. Refer to Section 01-14A.
Installation
  1. Follow removal procedure in reverse order.
  1. Replace all pushpins with new pushpins (N808994-S).
Front Door Trim Panel


ar0318d.gif

Jan 14, 2011 | 1999 Ford Taurus

4 Answers

97 Passat left front door won't open from outside - will open from inside if lock knob is pulled forcefully. I have new outside handle (not yet installed). All locks open properly with key. I have sought...


Hi.
Heat will not help and can damage the door lock mechanism further.
You can try lubing the door lock, but I do not thing it will help. I think there may be something wrong with the mechanism, or you will get the same problem from outside and inside.
If the door is opening from the inside , then the door lock mechanism My still be working. On VW the outer handle is connected to the lock by a steel wire, or by a metal shaft.
To access the door lock you need to remove the internal door panel. The door panel is held by hidden screws located on handles and by a set of clips located behind the panel near to the panel border.
I have service manual for several VW models, I will see if I can find the manual for 1995-1997 Passat and I will eventually send the diagrams to undo the door and access the lock.

Dec 30, 2009 | 1997 Volkswagen Passat

1 Answer

How do I replace a '94 chev Astro outside drivers door handle


You first have to remove the inner door panel by taking the screws out of the inner handle and arm rest. the outer edges of the inner door panel either has screws or it has clips that can be pulled out. after you remove the panel you need to roll up the window and you will be looking at the back of the handle. simply un hook the clips that hold the lockrod and the inner opener rod and unbolt the outside door handle. reverse the prosses and walla.

Sep 19, 2009 | 1990 Chevrolet Suburban

1 Answer

The front passenger door will open from the inside but not from the outside.


Requires removing inside panel to gain access to latching mechanism. Most likely a part has broken. Make sure window is raised. Examine all four sides of inner door panel. Look for screws and or screw caps. Remove all screws including door handle, power window and remote mirror controls. Gently pry bottom edge of panel away from door while feeling for resistance (be certain all screws are removed). When inner panel is released, raise panel up and remove. Inspect outer door and inner door latch to determine malfunction (working both controls one at a time). Replace defective parts from dealer or junk yard. Reinstall is reverse.

Jul 09, 2009 | 1992 Buick Park Avenue

1 Answer

Cant remove the handle from the door


The removal bolt/clip is on the inner edge of the door,Just open the door and look at the edge right in line with the handle and you will see a clip or large screw.

May 09, 2009 | Renault Sport Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

xxxxxx xxx

Level 3 Expert

4869 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...