Question about 1999 Honda CR-V

Open Question

Want start, but trying to.

I had to jump off my truck because the battery cable was about to come off battery pole. i jump it off and it started right off, but my auto lock doors lock me out so I took a stick and pull one of the spark plug wire off the plug it finally cut off. now it want start just turn over I put another battery in it but it did the same thing. the spark plug wire is not making that click noise as if it is fitting on the plug like it suppose to can you give me some advice. All my fuses inside the vehicle is good, but the fuses under the hood couldnt be check on all of them because yous have to use a phillips screw driver to take them out and hope someone can check them. could i possible may have broken the inside of the plug wire thats hold on to the top of the spark plug. thanks.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: 1995 honda accord cutting out

Honda has issued a recall on several models which have problems with the ignition switch. The recall includes vehicles from about 1992 through 2004 ( I'm really not sure of the years. ) Do a search for Honda ignition switch recall and you'll find some links. When you call the dealer I would suggest that you have your VIN handy so he can confirm your vehicle. This is a recall and should not cost you a dime for the repair.

Posted on Oct 06, 2008

SOURCE: hood latch won't release

This has happened to me several times, this will take two people, but all you need to do is have one person pull the hood release, while person number 2 pushes down on the hood, and then pulls up...that ought to do the trick

Posted on Jan 28, 2009

  • 2 Answers

SOURCE: humming noise under the hood

It could be the ABS. MY HONDA DOES THE SAME THING.
I took it to PepBoys yesterday and they could not connect to the
computer interface.They said I need to take it to a honda dealer
so they can connect and determine what is wrong with the
Automatic breaking system. The noise is the ABS motor
turning on and off.

Posted on Apr 30, 2009

  • 4 Answers

SOURCE: my honda accord 92 stops all of a sudden

You should check your main relay located in the drivers side (click here for picture)
You can open it if you wish and do a visual inspection for burned or cracked solder points to make sure that is your problem.

Hope it helps =]

Posted on Jul 01, 2009

  • 122 Answers

SOURCE: replaced alternator and battery, car still wont start.

My honda had a similar problem, however, it would not start at all. I checked everything, starter,battery, and even replacing relays, nothing worked. I ended up replacing the ignition switch. this is about a 50.00 part. You will need to remove some of the dash on the driver's side, 4-5 screws on the steering column to expose the switch. there are 2 screws that are visible and one that is hard to reach on the back side, however can be taken out with a small wrench (6 MM I believe). there are two wire harnesses that will need to be removed in order to get to that last screw. then re assemble as you have taken apart. When re assembling the plastic on the steering column, be careful to make sure that you align correctly or you will get a clicking noise every time you turn the wheel. total time period to do this is about 4 hours. Good Luck!

Posted on Sep 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Battery posts or a way to jump 2009 Audi A8 from the engine compartment


Pole to pole, red to red, black to black. Gives you the most current. Rev up the car for a minute or so before you try to start yours.

Jan 08, 2015 | Audi Cars & Trucks

1 Answer

Unable to start/ 2000 F250 V10


Try first unplugging battery cable for five minutes, this sometimes fix the problem. If it does not replace electric windows relay and electric windows fuse.

Jul 26, 2008 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

How can I jumpstart my car from my friends 2009Audi A8


You want to use the battery in the engine compartment, the one the alternator charges. I just connect the batteries directly pole to pole. When you rev up the engine the alternator will increase the output going into your battery.

Jan 08, 2015 | 2009 Audi A8 4.2

1 Answer

2005 nissan murano jump started witnow it will only idle but will not accelerateh jumper cables reversed


NOT SURE WHAT YOU SAYING ? WHEN GETTING JUMP STARTED, THE BATTERY FROM THE GOOD VEHICLE MUST PLACE JUMPER CABLES ON BATTERY TERMINALS, THE CAR BEING JUMPED, YOURS, THE (+) TERMINAL IS JUMPED FROM GOOD BATTERY, THEN THE (-) JUMPER CABLE FROM GOOD BATTERY GETS CLAMPED TO YOUR CARS FRAME OR ENGINE BLOCK, NOT YOUR DEAD BATERY !!!!!!! YOU MAY HAVE SHORTED SOMETHING OUT, MAYBE EVEN YOUR COMPUTER CHIP IN THE ECM ! YOU NEED A MASTER TECH TO HELP YOU ON THIS ONE, I WOULD'NT TOUCH THIS WITH A TEN FOOT POLE ! SORRY, I COULD BE WRONG, BUT, NOT AN EASY ISSUE OVER THE NET !!!!!!

Mar 26, 2013 | 2005 Nissan Murano

2 Answers

I need to jump off my 2007 chrysler concorde lx i can find the neg post but can not find the postive post. Where is it located?


above the battery there is a cable with a large red cover usually near the fuse box. . you are going to need a new battery.

Aug 04, 2011 | 2007 Chrysler Concorde

1 Answer

The car will not run and when i turn the ignition it only clicks. I tried jump starting it but it won't do anything. When i turn the lights on their powerful and not dim a t all i bought a new battery two...


You are going to have to put a new battery in, or charge the battery in it now up to11-13 volts. The computer is not getting voltage, and I suspect that the battery cables, possibly the neg cable is corroded inside the clamp and not allowing enough voltage to get to the starter or the computer. Take the neg and pos cable clamps off and using a piece of sandpaper or emery cloth clean the inside of the clamps, and the outside of the battery pole. re-assemble and try to charge the battery up. The jump start should work now, but be careful that you have the correct pole to pole as a reversal would destroy the diodes in your alternator.

Jan 22, 2011 | 1994 Buick Skylark

1 Answer

Where do you jump start a 2001 reg S class from. i have just brought one but cant get into the boot


Hi,
Jump starting means, connecting two cables to boost the power of your battery from another power source( another normal powered battery ).
You must look first for your battery, that is located in the engine compartment.
Connect a jump cables from the positive( + ) pole of your battery to another car w/ the same voltage of battery, connect another cable to negative( - ) pole of the another battery to your engine expose metal ground. DO NOT START YOUR ENGiNE/TURN ON. Let the other car start the engine, let it charge for 15 minutes.
Then, pull out the cables attach to your battery and to another. YOU MAY TURN YOUR ENGiNE and START the engine.
Hope that fixes your problem!
Thanks for using Fixya!

Dec 08, 2010 | 2001 Mercedes-Benz S-Class

2 Answers

Where to connect jumping cables on the battery


Dead car --- Red to + ... Black to -

Hot car --- Red to + ... Black to any metal car part away from the battery. Let the hot car charge the battery for a couple minutes before you try it. Try it. IMPORTANT: DISCONNECT THE HOT CAR BLACK JUMPER FIRST, then take the black off the dead car. Then disconnect the dead car red and then the other end on the hot car.

Feb 11, 2010 | 2008 Hyundai Veracruz

1 Answer

How to jump start trunk 92 miata battery sequence


connect +pole of your jumper battery to +pole of your discharged batter and -pole to negative pole. after starting, remove the jumper cables immediately.

Oct 01, 2009 | 1992 Mazda MX-5

1 Answer

1996 Dodge Ram won't start


run another test on the starter...they are about 20/80 bad/good right out of the box!

Jun 14, 2009 | 1996 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
1999 Honda CR-V Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...