Question about Honda Pilot

Open Question

Tail lights not working

Where is the fuse for the tail lights on a 2009 pilot

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
landon_boett
  • 15 Answers

SOURCE: which fuse box is the Tail Lamp fuse located

There's a map on the inside of the box

Posted on Sep 12, 2012

Ad
sulavaca
  • 1007 Answers

SOURCE: 2008 honda pilot tail lights wont work. Head lights , brake and signal lights work.

And the front side lights work?

Just go ahead and check the fuses to put that obvious issue away.

Once you're done with that, then go and check the rear light bulbs. We're working with the most obvious things first here.

After that, then you'll need to check any and all connections to the rear wiring loom as well as the wiring itself, all the way to the front.

I have to say at this point however, that in almost twenty years of working on cars, I have never had a wiring loom or connector issue to the rear side lights only. It's almost always the bulbs, bulb holders, or that someone has made a hash of the wiring.

Good luck.

Posted on Nov 14, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All lights work for Ford Escape 2009 except taill lights. If it is not the fuse, then what is causing the tail lights to not work?


Your front park lamps and rear tail lamps, use the same fuse and park lamp relay. So if the front park lamps work it's not the fuse or relay. The problem should be the wire circuit. The wire color for voltage at rear tail lamps is violet with white tracer. Use a test light and check for voltage, lamps turned on.
Your stop and turn work ok, correct?

Dec 22, 2017 | Ford Cars & Trucks

1 Answer

Brake lights work but tail lights out - Help! (Thanks)


Tail lights are on a different fuse than the headlights. If you already checked the bulbs then check the fuses. They're under the dash, on the left side of the driver.
Hope this helps.

Mar 26, 2015 | 2011 Honda Pilot EX-L

2 Answers

I have a 2009 Forester. the tail lights do not come on. The blinkers. brake lights and hazzard lights work. The headlights work. #16 fuse is not burnt out. What could the problem be? Thanks for your


have you checked the bulbs? do the front driving lights come on?
if the front lights come on but not the tail, then it could be that the bulbs are burnt

Dec 24, 2014 | 2009 Subaru Forester

1 Answer

2010 honda pilot tail lights and license plate light not working


park (tail, running) lights
there are 20 lamps in side and outside, are all 20 dead>
those lamps that glow HL switch 1st click is PARK
side lamps. dash lamps glow in park are they?
this answer , solves the who is bad.

as always, check all fuses first in both boxes
there may be a park relay./
alldata.com has the full schematic, if really curious. ...

Jan 10, 2014 | 2004 Honda Civic

1 Answer

Fuse diagram


in the fuse panel
where is panel,
there are 2, one near ankle and one near car battery.
it will be marked, tail or park.

Dec 29, 2013 | 2009 Honda Pilot

1 Answer

2009 Impreza 5-door left tail light and turn signal don't work .


first of all check and confirm whether in the fuse box separates the left from right side and see for blown fuse. or check for any disconnection on the rear light

Aug 10, 2012 | 2009 Subaru Impreza 2.5i

1 Answer

Why is my tail light, park light stop working at the same time?


you have a blown fuse for the running lights,consult your owners manual for a fuse location for tail light fuse location.then replace the fuse.your tail lights should be off when replacing the fuse.after you replace the fuse,turn the lights on to see if this repairs your problem.thank you for choosing fixya.com

Feb 27, 2011 | 2003 Honda Pilot

1 Answer

How to replace brake light bulb


  1. Open the back hatch of your Honda Pilot and look for two small screws. They will be right behind the tail light. Remove the two screws, using a standard screw driver. You should now be able to pull the tail light box away from the car a few inches to allow access to the sides of the tail light box

  2. Remove the two ball sockets found on both sides of the tail light box. At this point you should be able to move the entire assembly enough to get at the tail light. Inside the tail light you will find three bulb sockets. Remove all three bulbs by turning the sockets to the left.

  3. Then replace each break light bulb by screwing them clockwise into the sockets. Then, reassemble the tail light box in reverse order.
Hope this is a help PLEASE RATE MY HELP

Nov 28, 2010 | 2009 Honda Pilot

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

10 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

80407 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...