Question about 2005 Scion xB

Open Question

How to remove a transmission from a 2005 scion xb and install a new clutch

I am having trouble trying to take out a transmission out of a scion xb and i need to get it out of the way so i can replace the clutch into it Problem is.... the bolt under the exhaust manifold that is stopping the tranny from coming out i need to know how to get that off and how to get clearance so i can get to the clutch to replace it. no i dont have a transmission lift or jack. i am using rope.

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 101 Answers

SOURCE: need help to remove 2005 Scion xB water pump

1st ...that should be covered under 6 year 50k power train warranty from the dealer.
But if your over....you need to unbolt the right side motor mount (on the water pump side) and lift the engine some with a floor jack to get clearance,

Posted on Apr 11, 2009

Ad
  • 439 Answers

SOURCE: How d you replace the starter on a 2005 Scion xb?

There are two bolts, one is at the top exactly opposite of the first one you took out. You will not be able to see it, but feel around the head of the starter where it goes into the block and you will feel where it goes.

Posted on Jun 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I adjust slipping clutch on 2006 Scion XB?


You can't adjust a slippage on a clutch system. Probably need a new clutch assembly. The system is hydraulically driven and doesn't need adjustment.

Nov 23, 2015 | 2006 Scion xB

1 Answer

How many Speed sensors are in a 2005 scion xb


As far as i know, thee is only one speed sensor. It is located on your transmission. It is on the right side of you engine, underneath the air cleaner. Just a sensor, and easy to replace. Should take you less then an hour. There also might be one on you ABS system, but i am not aware of it on a Scion.

Feb 02, 2015 | 2005 Scion xB

1 Answer

I have a scion xb 2001 and i got the icos check engine abs and track off by any chance somebody can tell me what does it means?


Not without someone scanning the computer for trouble codes.
Once you have the codes you can start testing.

Dec 05, 2012 | 2005 Scion xB

1 Answer

When driving down the road my 2005 scion xb will what seems to shift into neutral while going 55 and the RPMs will go from 2500-7000. We have four codes coming up P0138, P0420, P0500, and P0705. We...


I did the same, replaced revolution sensor, worked better for a day then same issue. Needs a new prndl or neutral safety switch, you may have to re replace revolution sensor. Will be under factory warranty from dealership, or hopefully company you bought it from. I'm having exact same issue right now. Good luck!

Apr 22, 2011 | 2005 Scion xB

1 Answer

Just replaced clutch for my son's Toyotal Scion...one month later the clutch pedal is staying down and won't come back up


Hi, the likely problem is air in the hydraulic clutch line. This happens when there is a leak in the system that draws down fluid in the reservoir until air is drawn in. You must repair the leak and bleed the system to restore pedal pressure. The leak is usually in the slave cylinder at the transmission, but may also occur in the master cylinder above the pedal. If you can find your leak, I can provide repair instructions--just let me know.

jturcotte_389.jpg

jturcotte_1405.gif

Apr 02, 2011 | 2005 Scion xB

1 Answer

Driver's side door lock not responding to keyless remote or to interior switch - 2004 Scion xB


I had that issue with my scion xb. When I installed my audio system somehow the vibrations loosened the button wires clip . I removed the door panel and clicked it back in, also it could be a dead solenoid or disconnected door wire that goes from the 'noid to the door lock pin.

Aug 03, 2009 | 2005 Scion xB

1 Answer

How do I install alt. belt on 2005 scion xb?


I just looked at my '04 xB. It looks very straight forward.
loosen the bolt that holds the alternator to the bracket.
carefully slide the alt to the bottom. (Also be aware of the plug and wires on the alt.They should never hold the weight of the alternator. You dont want them breaking prematurely.)
Pull the belt off, remove the belt from the crank shaft pulley.

Do the reverse, and you will have replaced the belt.

Make sure to check the belt in about a week or so.
New belts will stretch over time. Make sure you keep the tension tight enough to work correctly, but not so tight that the alernator shaft is warped.
I usually place the new belt on both pulleys and give a good "medium" pull on the alt while tightening. Find the middle of the belt and squeeze them together, depending on the type and length of the belt, there should be about 1/4" of flex on both sides.

May 20, 2009 | 2004 Scion xB

1 Answer

Need help to remove 2005 Scion xB water pump


1st ...that should be covered under 6 year 50k power train warranty from the dealer.
But if your over....you need to unbolt the right side motor mount (on the water pump side) and lift the engine some with a floor jack to get clearance,

Feb 21, 2009 | 2006 Scion xB

1 Answer

Changing clutch in 05 Scion xB


For $20 US you can access the Chilton service manual here:
http://www.chiltondiy.com/

I personally prefer hard-copy and have either Haynes or Chilton for each of our vehicles. One or the other (probably Chilton - Haynes doesn't yet list the Scion line) will be found in just about any auto parts store and cost between ~$17-$30 US. The two lines are owned both by Chilton and I wouldn't be without one or the other. They are both based on a complete rebuild and have info on anything you can do at home and more. 

Oct 12, 2008 | 2005 Scion xB

Not finding what you are looking for?
2005 Scion xB Logo

Related Topics:

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scion Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Brad Brown

Level 3 Expert

15633 Answers

Are you a Scion Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...