Question about 2006 Buick LaCrosse

Open Question

Do you have to remove door panel to replace side door mirror on a 2006 Buick Lacrosse

The inside plastic triangle that covers the bolts to the mirror pops half way out but the bottom part seems to be under the door panel.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 316 Answers

SOURCE: How do I remove the front door panel to replace the mirror

Normal 0 Disconnect your negative battery cable. Locate and remove the screws that hold your interior door handles in place (they may be hidden by snap in, or snap on clips). Remove the interior door handles, then disconnect the wire clips to the switches. Your panel is held in place by snap in clips; use a small pry bar to pull them from the door (try to get as close to, or directly under the clips to prevent them from tearing out of the door panel). Once the clips are pulled, pull the panel upward to remove it from the door.
Install in reverse.

If you don't have power windows you will have to remove the manual window crank. It is held in place by a clip on the back side of the base. To remove the clip, you will need a small hook (kind of like a knitting needle). Put the hook in behind the base, and grab the clip and pull it off. To replace it, slide the clip back on the window crank, and snap it back on the door.

Posted on May 25, 2009

  • 1 Answer

SOURCE: I need to replace the 99 buick century side mirror

There is a small plastic piece (triangular shape) at the top of the door panel, opposite of the mirror. It is held in place by a plastic clip. You can gently pop that out, with a flat blade screwdriver or something similar. That will expose 3 bolts with nuts on them. On my 2000 Century, they are 10 mm. Take off those three nuts, and the mirror will come off.

Posted on Jul 19, 2009

  • 1986 Answers

SOURCE: 94 LeSabre inner door panel removal

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls

Posted on Sep 23, 2009

  • 324 Answers

SOURCE: I need to replace the driver side power mirror on

First screws are on the bottom side of the inside door pull/ arm rest, and after that there may be a few around the edges of the panel. unscrew the up and down locking pin if it has one up there by the window, gently pull out at the bottom to release the plastic push pins and once all pins are pulled out (there are probably 10 to release) reach in between the panel and gently take apart the connections. Lift up and out to free the panel of the window gaskets and there you are, Be easy with it all that stuff breaks easily!!!!

Posted on Jun 19, 2010

  • 1 Answer

SOURCE: where is fuse for drivers side heated seat on 2006 Buick Terraza

i have a 2005 terraza and the fuse panel is at the end of the dash board on the passengers side .there is a finger slot in a plastic cover,pull to remove. fuse panel is behind .i had to call a service tech to find mine. good luck pete.

Posted on Jul 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace rear vision mirror passenger side mazda 323 astina 2002


on the inside of the door above the door panel hinge side is a plastic cover almost triangle shape use flat screw driver to carefully pry off and the mirror mounting bolts will then be accessable

Jul 23, 2016 | Mazda 323 Cars & Trucks

1 Answer

How do i remove the door panel on a 1998 buick regal front driver side.


  • In the door handle "finger well" remove the plastic cover with a screw driver.
  • Remove 2 screws (they may be torx or regular hex bolts).
  • Remove Philips screw from behind the inside door opener lever.
  • slightly and slowly, pull back on the plastic triangle that is on the back side of the outside rear view mirror. It will stay attached to the door panel, but you need to release the catch nipple from the door.
  • Now, pull out on the edges all around the bottom, front, and back of the door panel ( you may need a putty knife or something similar to get your fingers in and start pulling).
  • once the door is loose, lift up slowly on the door panel until it is free of the door (don't pull too hard or far as there are still 3 wire bundles attached).
  • Unclip the door light plug on the back and the locks and windows switch plugs towards the front.
  • Reverse for install.

Dec 29, 2013 | 1998 Buick Regal

1 Answer

How do I replace left-driver-side mirror


On the inside of the door(oppiste mirror)should be a plastic cover under this are the securing screws for the mirror head take them out,job done!!

Jan 05, 2013 | 2008 Buick Lacrosse

2 Answers

Need to replace drivers side rear view mirror, powered. I have the new mirror, just need to know how t install it.


Hi,
You remove the door panel on the inside and it is bolted on from the inside. One wire clip and 3 bolts. Takes longer to remove and replace the door panel than replace the mirror....look for a hidden screw under the armrest , under the window/door lock button panel and sometimes behind the reflector or light on the bottom of door..Usually there are 3-4 screws and then the rest of the panel is held on by plastic clips. Get the screws out, then work a flat screwdriver or putty knife around the sides and bottom of panel, then lift upwards to get the top sealing side out of the track where the window runs.....Mike

Jul 14, 2011 | Buick LeSabre Cars & Trucks

2 Answers

How do u get the side mirror off


Remove the side mirror from inside the door, behind actuall mirror. Remove plastic triangle trim and then 3 support screws. If your just replacing the mirror itself (if cracked) just see a glass shop, they can cut a new mirror and glue it onfor you. -very inexpensive....

Feb 24, 2011 | 1998 Chevrolet Cavalier

1 Answer

Tring to fix passanger side mirror


if by "fix" you mean "replace".
pry off the plastic cover for the mirror bolts. its on the inside of the door infront of the side window.

also remove the plastic door panel.

unplug the mirror from the wiring harness.

remove the 3 "10mm" nuts inside the holes under the mirror mount cover for the mirror mount. support mirror while removing the last nut.

installation is the rev of removal

May 30, 2010 | 2000 Ford Windstar

1 Answer

Replace driver side mirror


The entire assembly has to be replaced, can not just replace the mirror.Remove the plastic trim on the inside of the door on the top part of the panel, either comes off with one screw or bolt or simply pull and it has pins in it.Then remove your bolts that hold the mirror in from the inside.If you have a power mirror remove the electrical pigtail, then simply reinstall.Hope I could help..HAPPY HOLIDAYS!!!

Dec 22, 2009 | 2006 Toyota 4Runner

2 Answers

How do you change a passenger mirror on a 2006 Chrysler Town & Country. The mirror is not broken just the plastic frame work.


If you're lucky, on the inside of the door, will be a triangular panel right behind the mirror that you can pop off. If you're not as lucky and it's one piece or the panel is blocked by the door panel, you'll need to remove the door panel to change it.

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door

Nov 09, 2009 | 2006 Chrysler Town & Country

1 Answer

How do you replace side mirror on '95 buick park avenue


If you're lucky, on the inside of the door, will be a triangular panel right behind the mirror that you can pop off. If you're not as lucky and it's one piece or the panel is blocked by the door panel, you'll need to remove the door panel to change it.

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door

Oct 28, 2009 | 1995 Buick Park Avenue

2 Answers

I need to replace the passenger side mirror on my 2006 F-150. I have the new mirror....does the inside door panel have to be removed or is this job done from the outside?


you need to remove the little black plastic cap on the inside remove the electrical conection and then remove the bolts place the new one in it's spot making sure that the gasket sits right or it will leak when it rains and place the bolts back without over tighting it or they'll snap plug electrical back in and place the plastic cap back on. hope this could help you.

Jan 08, 2009 | 2006 Ford F-150

Not finding what you are looking for?
2006 Buick LaCrosse Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...