Question about 2008 Hyundai Tucson

Open Question

Hyundai compressor belt bypass - 2008 Hyundai Tucson

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I reroute a surpentine belt on my 2006 hyundai sonata v6 to bypass the ac compressor.


We tried this on a Chrysler but could not because the things would not line up so what we did was disconnected the compressor from the air hoses and just used the compressor as an extra pulley. Worked good that way but no cool air. Ran several years that way.

Dec 26, 2016 | Hyundai Cars & Trucks

1 Answer

How to bypass the ac pulley on a 2001 hyundai xg300


You can possibly buy the belt for your model car that has no a/c. Just ask the clerk at the parts store for a belt for the vehicle that does not have a/c. If they do not sell one then you will have to take off the compressor and replace it with a pulley and braket.That is if they sell one for that particular vehicle.

Sep 08, 2016 | 2001 Hyundai XG300

1 Answer

Can i bypass the ac compressor with a smaller belt in a 2006 hyundai tucson


Most cases you can just check the sticker i? engine compartment for belt routing

Apr 09, 2016 | 2006 Honda Accord

1 Answer

Ac compressor pully


Take the compressor off & buy a shorter belt as long as it is still routed well.

Nov 08, 2013 | 2004 Hyundai Santa Fe

1 Answer

AC Compressor Bypass Pully


use a smaller belt use a pice of cord to measure

Nov 08, 2013 | 2004 Hyundai Santa Fe

2 Answers

How to bypass the ac pulley on a 2003 hyundai sonata


You can bypass the ac compressor by using a 82" belt. Feed the belt from the back of the engine at the water pump. Disconnect the power steering line at pump. It's a lot easier if you use some type of hook to hold/maneuver the belt. (I used a bent rebar) Follow this routing diagram I created. Bam! No more ac problems!
1_31_2016_11_37_40_pm.jpg

Sep 03, 2012 | Hyundai Santa Fe Cars & Trucks

1 Answer

Have a 2001 Hyundai Santa Fe v6 2.7liter. Ac compressor locked up and broke the serpentine belt.


Try A/C compressor clutch bypass. I believe some that I looked up were about $40-60 made by Dohrman. Your car is Foreign so it may be much higher. They are available through autoparts stores.

I searched and Advance Autoparts had some for different cars and a 15% Online discount. But you need to look at what has to come off to install it.

Also the part may show 6G where G is the number of grooves on the belt. This is crucial.

Depending on the configuration of the pulleys, all you may need to do is use a smaller belt and leave the old stuff in place. If A/C was an option for your car, try a belt from a VW without A./C.

You just need to remember that the Tensioner pulley has to work or the belt will slip off. That gives you a little leeway. Check for a different Tensioner pulley for the Non-A/C equipped VW which may be needed for this change.

Feb 12, 2012 | 2001 Hyundai Santa Fe

1 Answer

The pully on the compressor is bad can i just leave off the compressor and bypass it with a different size belt


Yes. there are basically three ways:

1. Put in a new a/c compressor.

2. Try a smaller serpentine belt. If this model came also w/o a/c, that serpentine belt should work fine. If all Santa Fes came with a/c then like you were saying try a smaller belt. You might have to try different smaller belt sizes(as far as I know) until you really get it right, which is not easy.

3. See if they make an a/c compressor delete pully for your particular model. This is basically just a single standalone pully (dummy pully). Aftermarket companies do not make them for all models, but if they make it for yours, you can use the same serpentine belt w/o a compressor. The internet is the best place to check.

Sep 20, 2011 | 2002 Hyundai Santa Fe

1 Answer

On the 2001 Sante Fe that year had with or without AC, I have AC but want to know if I can get the non-AC belt and simple bypass the compressor converting it to non ac??


Is the compressor locked up and this is why you want to make it non-AC? If so just remove the compressor clutch plate and you will be fine. Respond if you need instructions for this.

Sep 01, 2011 | 2001 Hyundai Santa Fe

Not finding what you are looking for?
2008 Hyundai Tucson Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...