Question about Cars & Trucks

Open Question

Ldv maxus van not starting padlock sign flashing on dash board how can u demobilise the van to get it started

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: i have a 55 maxus ldv van. i have problems

sounds like it could be the pressure control valve on the fuel pump not an expensive repair. the pressure drops in the line over night. try priming the filter whilst the engine is being cranked. the control valve is held on by 3 torx screws on the end of the pump.

Posted on Feb 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Today i bought ldv maxus van 3.5 2005 keeps jumping out 4th gear


will assume a used van
any warranty ? go back to place of purchase

if a manual ..worn syncros or adjustment to shifter cables

if an automatic a shift soleniod or worn drive clutches

26308726-vt3chhdyttrsn1qpus3sq421-4-0.jpg

Oct 12, 2016 | Cars & Trucks

1 Answer

Today i bought a ldv maxus van 3.5 2005 it jumps out 4th gear. I was told it's linkage cables by man I had it off


could be linkages
would need to track the shift cables to the gearbox

if no better worn syncros or automatic shift solenoids

looks like you are going to need a repair manual
ebay has a few



26308725-vt3chhdyttrsn1qpus3sq421-4-0.jpg

Oct 12, 2016 | Cars & Trucks

1 Answer

56 plate LDV Maxus, right hand indicator makes the rear fog lights flash along with the indicator


Hi,when this happens its normaly falty bulb or falty lamp holder which is creating bad earth,to find out if its a bulb swap all the bulbs at the back, so take the bulbs from left and put them in right and vicer vercer,if still blinking then take the board to have tested.
hope this was some help.

Apr 12, 2015 | Cars & Trucks

1 Answer

Vibration shudder


get tires rebalenced if that doesnt fix it check all cv joints / u joints make sure thay are good

Nov 27, 2013 | Cars & Trucks

1 Answer

How to fix 5th gear on my ldv maxus


Its likely you have a problem with the clutchnot completly disengageing or problems with disk or pressure plate

Jun 13, 2013 | 1997 Chevrolet Cargo Van

2 Answers

Help!!! how to reset a LDV Maxus key fob?


Hi
I know from experience that you cannot really re synch these fobs on the LDV Maxus vans.
What actually is the fault is an onboard component on the pcb has failed and we normally just replace that with a new one..the fob will be tested for operation and sent back. OR its the Relay in the ESA unit - under the left hand front glovebox on the bulkhead - black with cables going into it. We have those relays (soldered to the pcb) we can supply those or do the work for you. The fob connects to that ESA and the unit then fires the relays to open/close the doors. Sometimes that unit is installed upside down which causes water (condensation) to enter the box and have fun with your electrics.
The fob is SYNCHED to this unit via coding we can use your old fob to clone to a new fob and that will work with the ESA and the vehicle.
We have the parts on this link Items for sale from remobilise ltd

Here is a link to how to program the fob to the vehicle via the programmer - NOTE how you MUST have a working fob to program another (text at the start of the video... LDV Maxus flv

We can fix most problems on the LDV Maxus that occur with faults to do with the Central locking/fobs/ESA/ETACS - three relays are in the ESA and they control ONLY the central locking - two more relays are in the ETACS unit (behind the ashtray) and they control the fogs and intermittant wipers.

Any help or info needed please contact info@remobilise.co.uk
or tel 01792 896404.

We are based in Swansea UK.

Aug 30, 2012 | Cars & Trucks

1 Answer

Ldv maxus fault code p0402


Airbag warning light goes out on starting but comes back on after about 5 seconds

Jun 14, 2012 | Cars & Trucks

1 Answer

2007 ldv maxus 2.5 van will only start with easy stast and it comes up with 1 fault crank position sensor


next would be to check the fuel pressure at the fuel rail (under hood @ fuel inj sight) It sounds more like a fuel delivery problem then an electial problem

Jun 03, 2012 | Cars & Trucks

1 Answer

I have a 55 maxus ldv van. i have problems starting it most mornings,have had it jump started on boyh occassions and it will run all day, but next morning i have same problem,there seems to be power in the...


sounds like it could be the pressure control valve on the fuel pump not an expensive repair. the pressure drops in the line over night. try priming the filter whilst the engine is being cranked. the control valve is held on by 3 torx screws on the end of the pump.

Jan 08, 2010 | 2004 Chevrolet Venture Passanger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...