Question about Cars & Trucks

Open Question

Need cyl head torgue setting kia picanto g4hg engine

And valve tappet setings

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Valve tappet adjustment

well, I can see ur message has been here for quite some time. Most probably you got the answer to ur request.
I just did the valve clearance on the engine of my SJ413 that has the 1000cc engine of an SJ410 :
When cold: 0.13mm Intake and 0.18mm Exhaust
Engine sounded well and worked fine after that.
Enjoy
Mehdi

Posted on Feb 07, 2009

  • 1 Answer

SOURCE: tappet/valve settings???

o.25mm when hot this is for inlet and outlet

Posted on Feb 11, 2009

  • 653 Answers

SOURCE: Engine tappet clearances

According to http://freespace.virgin.net/tommy.sandham/databook.htm# Rocker Adjustment, the cold clearance is .008" intake/.018" exhaust in the non-GT 1500cc, and .012" intake/.022 exhaust on the GT. Sweet little car!!!

Posted on Mar 01, 2009

morse008
  • 1111 Answers

SOURCE: I need torque settings for 1600 beetle engine SP

wiki this

Posted on Aug 25, 2009

  • 608 Answers

SOURCE: how to measure tappet clearance with dial gauge

When setting tappets, it has to be born inind that the valve stem wears an indentation into the face of the rocker. This prevents a really accurate tappet adjustment, so the customer is right again. If you do not posess a tappet setting dial gauge, a normal engineers dial gauge will do just as well. The procedure is the same as using your feeler gauge except that you set the dial gauge up on the cylinder head with the pointer resting on the head of the rocker. Press down fairly firmly on the rocker valve end and zero the gauge. Next lift up on the rocker and read off the clearance, from the gauge, Use a magnetic base to support your gauge and repeat the pocedure for each valve pair.

Posted on Mar 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the tappet clearance and torque setting for hyundai atos 1.1 2007


valve clearance is inlet .02mm hot. exhaust .025 mm hot cyl head torque is cyl head torque stage1 30-35nm stage2 60-70nm stage3 run engine for 15 minutes. stage 4 tighten further 70-75 nm

Dec 15, 2016 | 2007 Hyundai Atos 1.1

1 Answer

My kia picantos gearbox is slipping. speed control sensor has been replaced , torque converter and 2 solenoid valves and yet still it is doing the same


At this point you should look into to replacing the whole unit, you may have deeper issues that only a trained service tech. can repair

Oct 06, 2016 | Kia Cars & Trucks

1 Answer

Can anyone help? i need torque settings for head gasket and settings for inlet tappets and exusht


Find complete torque specs here:
http://fme-cat.com/LiveDocs/99999.pdf
and don't forget that you MUST buy new head bolts since they are torque to yield and MUST OT be reused!!

I suspect that you at least need to check the valve lash but as long as your head gasket is not dramatically different than original (which it should not be because that would change your compression ratio) you should be close to okay (I would check it). Or if you had any machine work done to the head, in which case you certainly would need to adjust the valve lash.

Feb 03, 2015 | 2005 Ford Focus

1 Answer

Valve adjustment of kia picanto


This car has hydraulic valve adjustment. You dont adjust this, it shall do it by itself. If you have abnormal sound from the engine like from the valves you should check the oil Level and quality. A couple of quick oil changes may clean pollution and reduce such noise.

Apr 22, 2014 | 2005 Kia Picanto 1.1

1 Answer

Kia carens problems


Tappets......... perhaps is what your friend said. The tappets are part of the engine inlet and exhaust valve set up. Most tappets are self adjusting in modern motors, (Hydraulic).
The old fashioned tappets are manually adjusted during regular car servicing. This happens at set intervals, for instance every 20,000 miles.
Inlet valves allow air and fuel into the engine and exhaust valves let the burnt fuel and air out.
Tappets are fitted between the inlet and exhaust valves, they ensure that the valves open on time and more importantly close properly. If the tappet happened to be badly adjusted and did not let the valve close properly then damage to the valve and cylinder head can happen by burning.
If you have a significant power loss I would be surprised to find that the just tappets/valves were to blame.

Jan 26, 2014 | Cars & Trucks

1 Answer

2002 kia sedona number 1cylinder ft head or rear 3.5 ltr


on all v-6 v-8 engines the number one cyl is the furthest forward valve cover. one valve cover will be built closer to the front of the engine this is always # 1 cyl firewall side is 1,3,5,
radiator side of engine is # 2,4,6, cyl. so number 1 is the rear forward cyl

Aug 31, 2012 | Kia Sedona Cars & Trucks

1 Answer

Fast tapping sound from top drivers side of engine when excellerating fast any ideas?


Tapping on the top of an engine is caused by excess valve tappet clearance.

You can have a worn rocker arm also.

Loose valve tappets usually are the loudest at a constant engine speed. when there is little torgue being produced.

A worn rocker arm with a bearing problem will make more noise during acclleration.

Feb 11, 2010 | 2005 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...