Question about Hyundai Cars & Trucks
How to remove control panel to replace bulb behind fan and heater in Hyundai getz
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove the metal part of the ashtray, you will see two screws that hold the ashtray plastic part on, underthis is the screws for the lower panel
You can now carefully lift the whole panel away.
Posted on Mar 31, 2009
to get to these you need to remove the box above by taking out the rectangular screw cover at the back and take out the one screw. gain access to the edge of the box with a flat tool and gently pull the box clear from its clips. now the 2 retaining screws should be visible that hold the controls in place after removing these you need to pull the controls quite firmly from its clips being careful not to damage the wiring to the back. this multiplug has to be released by pressing a retaing clip on the plug itself. once removed the whole unit needs to be separated into 2 halves being careful of static, by removing the screws on the back.once inside there are grey and white bulbs, white for the illumination and grey for the buttons (heated rear window and a/c etc)
Posted on Apr 11, 2009
If memory serves, there are two screws holding this light assy to the rear package deck. They are covered (LH and RH side of this assy). remove the covers and using a phillips screwdriver, remove the screws and lift the assy up and away from the rear glass. you now have access to the bulb and socket.
Posted on May 27, 2009
yes you can. You will need a pair of pliers a thin rag one that is not to bulky. and a piece of vacuum line. like the vacuum line on your car. small. well first you need the replacement bulb get at dealership it is small. that will be the size of vacuum line you need. with the pliers carefully pull off your fan speed knob you will see the bulb back in the hole. take the vacuum line push onto the bulb twist line and pull it should pull the bulb out. then put new bulb lightly into vacuum line look at the slots where the bulb goes you will need to line up the bulb should be straight up and down. push bulb in you will feel slight click then reverse the way you turned the vacuum line to pull out just the line. and you should be good make sure the bulb lights up before you put the knob back on. good luck
Posted on Sep 12, 2009
Tips for a great answer:
May 12, 2014 | 2008 Hyundai Getz 1.6
May 15, 2011 | Hyundai Motor 2004 Accent
May 05, 2010 | 2003 Dodge Grand Caravan AWD
Nov 17, 2009 | 1999 Toyota Camry Solara
Aug 04, 2009 | 2003 Hyundai Santa Fe
May 18, 2009 | Hyundai Motor 2004 Accent
Apr 24, 2009 | Hyundai Motor 2003 Elantra
Dec 31, 2008 | 2004 Hyundai Elantra
Oct 06, 2008 | 1994 Toyota Corolla
Aug 24, 2017 | Hyundai Cars & Trucks
239 people viewed this question
Usually answered in minutes!