I have a 1993 K reg Peugeot 405 and a problem with a rear brake compensator problem I hope you can help, I need to know what a peugeot 405 estate rear brake compensator valve 'should' look like or where I can find a pic of it.
It was attached to the axle, and the four brake pipes were attached that all looked ok, but the arm is floppy, like something might be missing?? any advice gratefully received or pointers on where I can find a nice clear image of one please
the one on my 405 is in a bad stat. what i can tell you is there should be a spring attaching the arm to the trailing arm, these rot away for a passtime they cant be replaced, having spoke to a main dealer yesterday (17 june 2009) the sum of £98 would get a new one. unfortunately i cant provide you with a picture as mine covered in cack. try a main dealer they might let you look at there parts book.
water leaking from matrix but the pipes are dry thus water is leaking into passenger side floor got...
(More)
water leaking from matrix but the pipes are dry thus water is leaking into passenger side floor got a new heater matrix and tried to fit it but its still leaking from the joint and the pipes show no leaks
central locking opening 4 doors but not drivers door manuel central locking shoots all locks except...
(More)
central locking opening 4 doors but not drivers door manuel central locking shoots all locks except main drivers door help Problem is on Peugot 106, but that's not an option in the list....
how do i get into injection pump on treg 1.9td citreon dispatch van imobilizer has cut in need to...
(More)
how do i get into injection pump on treg 1.9td citreon dispatch van imobilizer has cut in need to disarm it nick
my air con on my 206 gti is overheating i think,iv took glove box out an there is a small fan...
(More)
my air con on my 206 gti is overheating i think,iv took glove box out an there is a small fan hanging inside, where does it go?