SOURCE: chevy s10 brake caliper
Hey zach, no they are not reverse thread. They are most likely just very tight from the heat and cool cycles they go thru. Put your wrench on them and give it a few sharp raps with a ball peen hammer. That should break them loose enough to finish with the wrench.
SOURCE: allen wrench size to fit caliper mounting bolt
some are 7/16 and some are 3/8 amd some are torx
SOURCE: bolt size for 96 chevy front caliper
2002 Trailblazer - 4 bolts on caliper. I loosened the top bolt with the pin, but when I try to loosen the bottom, it feels like I'm tightening it. Do I need to loosen all 4?
SOURCE: cannot remove rear brake caliper
Try using a "c" clamp and push the piston in all the way on the caliper. Take the lid off the master cyl first. Lee
392 views
Usually answered in minutes!
×