At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Front seat in bmw 525 will not move and the motor giving no sound
Car got stuck in a flooded street and someone opened the door and lots of water got inside on the floor.
all other electricals seem to be working including the electric passenger seat.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is either an electrical problem or the infamous twisted seat problem caused by the cables between the motors and reclining gear units of the power seat. Check the connector under the front of the seat and make sure it has not been disconnected listen to determine whether the motor at the front of the seat are turning when you try to move the seat (they are fairly quiet) If the motor spins, then search internet for "bmw twisted seat" good luck
It got flodded. Water bad for electrics. That be the problem. Bad. Water in electrics very very bad. Move to higher ground to keep water away. Unless you live in Bangladesh, the cannot escape water.
get someone to hold the lever up make sure that the clip /lever things are pulling out teh track then sit in back and kick the lower part of the seat and it should move ,try some engine oil in the runners first as well not that spray ,its only fish oil buts its good for the knees or back though if well rubbed in
open trunk, disconnect rear trunk light. use jump box and connect wires to pos neg on jump box. this will give u enough juice to open doors, I have done it twice. easy to do
This is a common BMW problem before giving to a mechanic try looking at the mechanism to see if any bolts are loose or missing,you might find the bracket is broken or torn and needs to be welded or replaced,the job is relatively easy but be carefull because of the SRS system if not sure give it to an expert.
you should check the motor and trans mounts if any ofthese are bad the motor could be shifting around and letting the fan rub the shroud wich could give you a noise
×