Question about 1996 Mitsubishi Montero

1 Answer

Engine replace what chevy or ford engine can i use to replace a 96 montero 3.0

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 523 Answers

You'd have to review a number of items to make this swap, engine rotation, width, depth, location of oil pan sump and such. Your biggest issue will be that of electronics. If your looking for fuel injection you'll have to use the ECU from the other engine with its sensors. Other big issues is engine to transmission transission, you'll have to create a machined plate to act as an adapter to bring the two together. I realize the 3.0 V6 engine can be a challenge to get parts for and such but dollar to dollar replacing the 3.0 V6 with something else would be a costly endevor. I have rebuilt the 3.0 using a lacal shop, it's a challenge but far easier then the engine swap. If you do make the swap post it on youtube as many of us would like to see it.
Best of luck,
Tom

Posted on Oct 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 96 Chevy Blazer 4 door I've change the ignition switch starter all that good old stuff if I turn the key and jumper by the starter it will run I have liked it just no crank no start


1989 Chevy blazer 4.3 won't start..I have ... - CarGurus

www.cargurus.com > Questions > Chevrolet > BlazerCarGurusJan 30, 2013 - 96 Chevy S10 Blazer with 4.3 L engine vortex will turn over but won'tstart. ... i a 93 k5 blazer 5.7tbi in cold weather it will not start, if i hook jumper ... was told it just needed a Fuel pump, I replaced the Fuel pump, and the Filter, ...

Oct 12, 2015 | Cars & Trucks

1 Answer

Fuel relay


have a pressure test done on the fuel manifold as your problem may have been the regulator in the manifold.

Jun 09, 2013 | 1996 Mitsubishi Montero

1 Answer

Problems shifting into overdrive in my 96 chevy 1500 4x4


i have a 90 chevy 2500 2wd 350ci.when i go to start my truck the key turns hard in the ignition,the check engine light and brake light come on the heater dont work,and the transmission will shift from 1-2 at real high rpm and shift hard,no 3-od.this comes and goes,but all happens at the same time.some times it last for 10 min,sometimes its days.what is going on?

Apr 24, 2012 | 1996 Chevrolet K1500

1 Answer

Diagram on the firing order of a 95 96 ford contour?


For a six cylinder engine the firing order is 1 4 2 5 3 6
For a four cylinder engine the firing order is 1 3 4 2

Mar 09, 2011 | Ford Contour Cars & Trucks

1 Answer

I would like to see a full picture of a gas tank with the sending unit for mitshubishi 2000 montero sport ls because i am having problem how to intall the sending unit. i do not know which way it goes.


Bing.com is a great search engine for that. Its what I used when installing the TPS on my 2001 Chevy. Just remember the flow goes towards the engine.

Apr 02, 2010 | 2000 Mitsubishi Montero Sport

2 Answers

I wanted to change my thermostat in my 93 chevy corsica but do not know where it is located


follow your upper radiator hose from the radiator back to the engine it will be under the housing hose connects to

Aug 10, 2009 | 1993 Chevrolet Corsica

2 Answers

1996 Mitsubishi Montero has no power..


My 96 Pajero SWB 3.0 would loose power as soon as i accelerate. It feels like the spark plugs are miss firing or if the engine was flooded.

I did a general service which included oil change, oil filter, fuel filter, air filter, spark plugs i checked my O2 sensor, dissembled and cleaned throttle body and sensors. Cleaned air intake sensor as well as the distributer etc.

Problem not solved, still loose power when i accelerate....can it be something wrong with my ECU??

My A/C control isnt working at all. Found a 15Amp fuse that was blown but when replaced it shorts again. Where can i get a wiring diagram of the heater/a/c system for my vehicle model?

May 28, 2009 | 1996 Mitsubishi Montero Sport

1 Answer

Firing order and camshaft sensor for a 96 chevy lumina 3.1 v6


Here is a diagram of your motor with the firing order:

704b0d7.gif

Mar 19, 2009 | 1996 Chevrolet Lumina Mini

1 Answer

Alternator problem on 96 Mitsu Montero


Get a new alternator, as you may go through 3-5 rebuilts before you get a good one.

Mar 18, 2009 | 1996 Mitsubishi Montero

Not finding what you are looking for?
1996 Mitsubishi Montero Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...