Question about 2004 Chevrolet Malibu
Close all the vehicle doors.
Insert the ignition key into the ignition lock cylinder.
Press and hold the DOOR unlock switch.
While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
Release the DOOR unlock switch. The doors will lock and unlock to confirm the program mode.
Press and hold the LOCK button and the UNLOCK button simultaneously on one keyless remote. After a delay of approximately 15 seconds , the doors will lock and unlock to confirm the programming of that transmitter.
Repeat the previous step to program up to four transmitters.
Turn the ignition switch to the RUN (one more click forward) position in order to exit the keyless entry transmitter mode.
Operate the transmitter functions in order to verify correct system operation
Posted on Jul 25, 2010
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
Posted on Jun 04, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
stand right next to the car and hold both the lock and unlock buttons down at the same time untill the locks cycle about 15 seconds
Posted on Dec 30, 2009
There are two wires in the trunk that you have to fumble around with. When you open the trunk it is on the right hand side...They may be taped up, play around with the two wires until you here the locks of the doors lock and then unlock and the trunk latch will open. Make sure the windows are open when you try this so you wont get locked out by chance. Once this happens, hold the "Lock" and "Unlock" buttons simultaneously for 15 secs until the locks repeat the locking and unlocking pattern they performed earlier. Once this happens, you are programmed and ready to go.
Posted on Aug 16, 2009
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold
down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock
the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until
the door locks and unlocks.
This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing
12. Turn the ignition switch to the ON position in order to exit the transmitter programming
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
Posted on May 27, 2009
Tips for a great answer:
Oct 21, 2015 | Cars & Trucks
Feb 15, 2015 | 2005 Chevrolet Malibu
Apr 10, 2014 | 2004 Chevrolet Malibu Maxx
How to Program a Key FOB for the Chevy ... your Chevy, if you obtain new or replacement keys they will need programming to work with ... How Do I Program MyKey Fob? ...
Mar 14, 2013 | Cars & Trucks
Nov 23, 2012 | 2005 Chevrolet Malibu
Nov 04, 2010 | 2004 Chevrolet Malibu
May 27, 2010 | 2004 Chevrolet Malibu Maxx
Jan 27, 2010 | 2000 Chevrolet Malibu
Jul 23, 2009 | 2004 Chevrolet Malibu
Jun 08, 2009 | 2000 Chevrolet Malibu
8,237 people viewed this question
Usually answered in minutes!