Question about 1989 Chevrolet Camaro

1 Answer

Wont start,battery is good,turn ignition switch and nothing happens not even any clicking.i replaced the starter from another good running car and installed an newfloor console,could the problem be the neutral safety switch or possible fusible links that burned out.how many links are there on a 1989camaro z28.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,002 Answers

You could try replacing the two fusible links down by the starter. They look like two black pieces of rubber on the wires. Just cut them out and splice the wires back together. If that's your problem it should start. If you unplug the neutral safety switch from the tranny the car should start if that is the problem. Hope this helps.

Posted on Jun 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 1.8t vw passat wont start


There are many possible issues that can cause the problem you are experiencing. A bad starter, a bad ignition switch, relay, wiring circuit for ignition / cranking.

If you are mechanically inclined, I recommend you begin to test all components to narrow your possible problem.

Jun 19, 2017 | Volkswagen Passat Cars & Trucks

1 Answer

My car wont start and my windows dont work


Check battery connections and cables. Ground may be broken. Remove cables and clean battery posts then reconnect cables.
Check ignition switch, replace as needed.

Jan 21, 2013 | 1998 Chevrolet Camaro

1 Answer

Car doesnt want to start. all lights come on when in the on position however when I turn it to start nothing happens it dont even try to turn over it just clicks 2002 hyundai xg350


The starting system consists of:
  • starter motor
  • starter switch, part of the ignition switch
  • starter motor solenoid relay switch
  • starter solenoid
  • starter drive
When you turn your key to start your engine, it just clicks, right? If so, more than likely this is due to a bad battery. Even though your battery may appear to be fully charged, it may have a dead cell, or worse. If you get a jump, does the vehicle start? If so, replace your battery.

Possible sources of the problem if the engine does not crank or the relay clicks:
  1. Battery
  2. Starter motor
  3. Starter motor relay
  4. Ignition switch
  5. Damaged fuse
  6. Anti-theft system
  7. Circuitry

Mar 16, 2011 | Hyundai XG350 Cars & Trucks

1 Answer

Car wont crank


I have a 2000 Olds Intrigue that has the starting problem that some people have spoke about. You turn the key and all lights come on but the car will not start nothing. I 1st replaced the ignition switch which did not correct the problem. To get around the problem I have connected a wire to my starter and ran the wire up to the battery and when the car acts up I take the wire touch the positive pole on the battery post and the starter will turn over. I then get in my car and use the key and start the car. I have not been stranded by the car since. I try the key a few times if nothing happens I'll wait a few minutes and if that does not do it I jump the starter with my wire. This has been working for the last 2 years. It's not a correction but it is a work around.

Jul 08, 2010 | 2000 Oldsmobile Intrigue

1 Answer

96 Olds Aurora wont start nothing happens when i turn the key,battery is good.


CHECK THE INSTRUMENT CLUSTER FOR POWER TO GAUGES TO SEE IF THEY WORK WHILE IGNITION IS IN THE ON POSITION.IF NO CHECK THE 40 AMP IGNITION FUSE.IF FUSE GOOD IGNITION SWITCH IS BAD OR HAS A LOOSE OR BROKEN WIRE.IF FUSE GOOD ALL GAUGES IS WORKING.I BE LOOKING AT STARTER AND STARTER SOLENOID.REMOVE THEM HAVE AUTO ZONE TEST STARTER.OR YOU CAN GET A REMOTE STARTER SWITCH AND SET OF BATTERY CABLES.HOOK BATTERY CABLES TO A BATTERY.WITH STARTER OUT OF CAR TAKE BATTERY CABLES HOOK NEGATIVE BATTERY TO STARTER BODY FOR GOOD GROUND.TAKE POSITIVE BATTERY CABLE HOOK TO STARTER POSITIVE TERMINAL WHERE POSITIVE BATTERY CABLE GOES.THEN HOOK THE REMOTE SWITCH RED WIRE TO STARTER POSITIVE TERMINAL AND THE OTHER REMOTE SWITCH WIRE TO THE S OR SWITCH TERMINAL ON STARTER SOLENOID.PRESS THE REMOTE SWITCH IS STARTER RUNS GOOD WITH NO FUNNY NOISES ITS GOOD IF STARTER DONT RUN THE STARTER SOLENOID OR STARTER IS BAD. THE PROBLEMS IN YOUR CAR COULD BE A BAD KEY TRY ANOTHER KEY YOUR CAR HAS THE THEFT DETERRENT MODULE SYSTEM BEST TO HAVE CAR SCAN TO CHECK THE THEFT SECURITY MODULE AND THE TRANSMISSION NEUTRAL SAFETY SWITCH IF ITS BAD STARTER WONT WORK.ALSO CHECK THE THEFT DETERRENT MODULE RELAY. BEFORE REMOVING BATTERY CABLES TURN OFF RADIO SO YOU WONT LOSE YOUR RADIO PLAYING CODE.

May 20, 2010 | 1998 Oldsmobile Aurora

1 Answer

Doesn't start- Thought starter was bad replaced and still nothing -won't turn over?Battery Good Checked all fuses and starter that was replaced is good! Turn ignition key and nothing? Selinoid not even...


The ignition switch attached to the column is probally bad, check the small wire to the sloenoid for battery when the key is turned to the start postion, if no battery, your not getting power from the ignition switch to the starter solenoid.

Mar 13, 2010 | 1991 Cadillac DeVille

1 Answer

97 cavalier wont start when turning key nothing happens


if the starter motor doesn't turn at all, and all you hear is a clicking then the starter is bad and the solenoid is good

if the starter is turning and the car still doesn't start then the starter motor is slipping and is bad

to check the solenoid put a jumper from the main battery lead (Large Red) to the ignition wire switch (Smaller Purple) is the starter operates the solenoid and starter are ok and you problem is in the ignition switch, or nuetral switch, or wiring.

Mar 21, 2009 | 1997 Chevrolet Cavalier

2 Answers

Won't start - Starter or ignition or what?


It could be the ignition going out. To test the ignition you would have to get a volt meter and find the hot wire to the ignition. When nothing happens when you turn the key, test the hot wire going out of the ignition that eventually goes to the starter. Your ignition is just like a light switch, just a little more complex. You will have to find the wire that connects the switch to the starter to see if the switch is working properly. If when you try to start the car see how many volts you are getting. It should be at 0 until you try to start the car. then it should jump up to either 12 or 24 volts depending on what your start used to start the vehicle. A lose wire from the battery can cause these same problems however. I would start with that and make sure you have good clean battery posts and connections. Then check to make sure they are tight. Then get into the ignition switch checks.

Nov 11, 2008 | 1996 Buick Park Avenue

2 Answers

95 F150 wont crank


the starter should be replaced. The solenoid is kikcing the pinion out but there is no contact being made to turn the starter motor. I have the exact same truck and before i changed the starter used the old starter tap trick. Tap the starter casing with a hammer and it should start turning again. hope this was helpful for you. Good luck.

Sep 16, 2008 | 1995 Ford F150 Styleside Regular Cab

2 Answers

Car wont turn on *not battery*


what i would do is do some voltage checks at the starter. and also check to see if the starter is getting signal from the ignition. with that information we can help you.

Sep 15, 2008 | 1992 Buick Roadmaster

Not finding what you are looking for?
Cars & Trucks Logo

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...