Question about 1999 Acura TL

1 Answer

Code p1457 EVAP control leak for a 2000 Acura TL

Code p1457 apparently means that I have a leak in my EVAP control system (control canister system).

I also know that there is a cannester that may need to be replaced. Where is the cannester located? I would like to check the hoses to make sure they are connected.

I have also been told it can be the gas cap and the cap on the cannester. I don't know what this coast but I can change it if the price is reasonable. Can you tell me what this might cost?

Thanks,
Ron

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 166 Answers

I have not seen a evap canister need to be replaced . i belive it is located near the fule tank . the proublem is most likly the evap control valve or a leak . i use a smoke machine to locate leaks

Posted on Jun 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does fault code P1450 mean for Honda Cr-v ?


No P1450 on a Honda?

P1382 Cylinder Position Sensor No Signal P1456 EVAP Emission Control System Leak Detected (Fuel Tank System) P1457 EVAP Emission Control System Leak Detected (Control Canister System) P1459 EVAP Emission Purge Flow Switch Malfunction P1486 Thermostat Range/Performance Problem P1491 EGR Valve Lift Insufficient Detected P1498 EGR Valve Lift Sensor High Voltage

http://www.obd-codes.com/trouble_codes/honda

Dec 30, 2015 | Honda Cars & Trucks

1 Answer

I have a p1457 code on my 3.2 tl would that cause the car to hesitate at times.


Hello, I replaced the EVAP control canister shut valve. Like the bypass valve of the TSB, this one is down there in the salt, open to road-water splash and dirt.Here is website with the info.
Check Engine Code P1457 Acura Forum Acura Forums

Nov 03, 2015 | Cars & Trucks

1 Answer

Error code p1457


P1457 ACURAP1457 ACURA - Evaporative Emissions Control System Leakage EVAP Canister System


0 Comments ' Add YoursPossible causes- Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler caphelp.png Help with thisSymptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Possible a noticeable fuel odor caused by the release of fuel vaporsP1457 ACURA DescriptionThe evaporative emission (EVAP) control system stores fuel vapor from the fuel tank in the EVAP canister temporarily to prevent it from escaping to the atmosphere and to enable it to be drawn into the engine by intake manifold vacuum and burned. In addition, the onboard refueling vapor recovery system (ORVR) stores fuel vapor generated when refueling in the EVAP canister.

The EVAP control system leak detection method improves the accuracy and frequency of the detection by determining faulty components and vapor leakage for each part. The EVAP control system (from the purge valve to the fuel tank) is divided into two parts. One is the "EVAP Canister Side" (from the EVAP two way valve to the purge valve) and the other is the "Tank Side" (from the EVAP two way valve to the fuel tank). There is 0.04 inch leak detection and 0.02 inch leak detection. If the 0.04 inch leak detection results are OK, the 0.02 inch leak detection runs.The P1457 code is detected when the EVAP system has a very small leak.

Sep 13, 2012 | 1996 Acura RL

1 Answer

1457 code


the P1457 is EVAP system, P1457 is EVAP system leak detected (control canister). It's probably just your gas cap. Make sure it's clicked at least 3 times. and then see if lights out. if cap seal is bad it will give this code also. good-day !

Mar 18, 2012 | 2000 Honda Accord

1 Answer

MY 2002 Acura TL keeps showing a code of P1457. What does this mean and is it something that can be fixed at a reasonable cost?


that code is for the EVAP system, try replacing your fuel cap first, other causes are broken vacuum lines.

Jun 13, 2011 | 1999 Acura TL

1 Answer

Received p1457 ecu code evap system leak evap control canister system how to fix ?


means your loseing fuel pressure replace gas cap if that isnt it evap control canister replace it good luck

Feb 12, 2011 | 2000 Acura TL

1 Answer

My "check engine light" and


SYMPTOM
The MIL is on, and DTC P1457 [leak detected in EVAP
control system (EVAP control canister system)] is set.
PROBABLE CAUSE
The EVAP bypass solenoid valve can fail due to
corrosion. Replace the bypass solenoid valve first. Clear DTC's and test drive.

Dec 10, 2010 | 1999 Acura TL

1 Answer

How to repair a code P1457 on a 1999 acura


p1457 is defined as an evap system leak on the canister side of the system.p1457 is for the charcoal cannister. Check the lines to make sure there isn't a leak. Otherwise, replace the cannister. First check for the leak,if there is no leak then its canister problem causing this error. You need a special smoke machine to run smoke through the machine and pinpoint the leak.At local garages they have smoke machine and pressure tools to check the leak. Keep updated with more queries.Thanks.

Oct 21, 2010 | 1999 Acura Integra

2 Answers

I need an answer for engine code P1457 auxiliary emission control


CODE P1457 EVAP SYSTEM LEAK DETECTED CANISTER AREA 5 POSSIBLE CAUSES 1- EVAP CANISTER IS LEAKING DAMAGED OR FULL OF WATER. 2- EVAP CANISTER PURGE LINE IS LOOSE DAMAGED OR BLOCKED. 3 - EVAP TWO WAY VALVE OR ORVR VENT SHUT VALVE IS DAMAGED. 4 - EVAP FUEL TANK VAPOR CONTROL VALVE IS DAMAGED OR HAS FAILED. 5 - PCM HAS FAILED.

Sep 06, 2010 | 1998 Honda Accord

1 Answer

Code P1457 (99 acura tl)


Nothing will happen. The code is for the prevention of fuel vapors getting out of you tank and into the air damaging the enviroment. You need a quality repair shop check the gas cap and perform a smoke test on the evap system. Basically it is a pump that fill your tank and lines with smoke to find where it is leaking. Expensive equiptment, but most good shops have it. Code be as little as a hose, $100 with the test, to the charcoal canister replacement. $600

Mar 30, 2009 | 1999 Acura TL

Not finding what you are looking for?
1999 Acura TL Logo

Related Topics:

1,838 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...