Question about 1999 Chevrolet Corvette

2 Answers

On my 2000 corvette conv. the right brake light failure

On my 2000 corvette conv. the right brake light and emergency flashers do not work. New bulbs, no help.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Sounds like ground problem, ground for brake lights r in drivers side rear about 1 foot from drivers side brake light .

Posted on Jun 04, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Hey bud,,i got a 2000 vette mine is doing the same thing,,i have done everything i can think of,,,,if you have any luck mail me please,,,mikey_422001@yahoo.com....

Posted on Jun 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1987. Why is there no power at the turn signal cam?


Do you have brake and parkng lights? The turnsignal switch on the column is just designed to relay a path to the flasher and then it is designed to interupt the brake and some of the parking lights lights, which cause the flashing on and off. Double check fuses double check bulb socks and bulbs for good contacts. Does the 4 ways work? If the lights all flash then locate the turn signal flasher and switch with emergency flasher if possible to rule out relay. If those are all good and the emergency flasher lights work and bulbs, then you would have a problem with the turn signal switch. Hope this all helps

Feb 22, 2016 | Ford E-150 Cars & Trucks

2 Answers

Flasher relay location Pontiac Bonneville 2004 removal and installation.


If the right side works it's not your flasher, Its your left side bulb, either front turn signal or rear tail light bulb.

Aug 02, 2014 | 2004 Pontiac Bonneville

1 Answer

I have no signal lights, left or right, on my 2000 Oldsmobile Intrigue. I was having a problem with a front bulb not contacting properly making the right signal flash rapidly. I left it flashing while


Check if your emergency flashers still work. You possibly need a new flasher. Some cars have separate flashers for turn signals and emergency flashers, but some they are both together. If your emergency flashers still operate leave them on and find the flasher (follow the clicking noise the flasher makes) and see if there is another flasher right next to it. swap with the emergency flasher and see if your turn signals work again. If so, replace the faulty flasher.

Jul 26, 2014 | 2000 Oldsmobile Intrigue

3 Answers

No brake lights 3rd brake light works just put all new bulbs in.checked all fuses even under the hood,does this vehicle have a flasher fuses because those dont work either. both turn signal and rear lamps...


car should have an emergency flasher. If it isn't working, it could affect the brake lights. might be the same unit as the turn flasher but different relay inside. Is your fuse panel behind the glovebox? manual says flasher is in the fusebox. It's worth a try replacing this flasher unit. Looks like this:

ab6de9f.jpg

Sep 04, 2010 | 2000 GMC Jimmy

1 Answer

No brake lights or emergency flashers. Changed


Try adjusting the brake light switch on the brake pedal.

The flashers have a relay in the circuit, test it and see what you get . The flasher switch may be the culprit also. By pass the switch with a pair of jumper wires and see if flashers work.

Apr 24, 2010 | 1991 Jeep Cherokee Briarwood

1 Answer

1989 chevy 1/2 ton.brake lights or emergency flashers dont work.tail lights an blinkers work.


The Blinkers and the Brake Lights are the same bulb. So check the brake light switch. Flashers use a different flasher unit, than the turn signals

Dec 16, 2009 | 1989 Chevrolet K1500

2 Answers

I have a problem with a 93 Jeep Cherokee Laredo 4W - The right blinker & brake light works like they should. However,the left brake & backup lights are out ( new bulbs have been installed &...


a very bad earth in that lamp holder,, clean all the earths and try another new buld in it, iv had this before and that was the problem sorted

Nov 02, 2009 | 2000 Jeep Wrangler

1 Answer

Emergency Flashers totally out, Rear lights malfunctioning


Check the ground on the passenger side rear lights, it's likely bad. As for the hazards, sounds like a bad flasher or fuse.

Sep 03, 2009 | Ford Super Duty Cars & Trucks

2 Answers

Rear brake lights stopped working


Check your fuses of course,you probably did.Listen your not going to believe this,the wire at the brake light switch can be bad.sometines the wire can break inside the vinyl cover just a milameter.use a test light for presence of voltage at the switch and check a few inches back to see it voltage is present. MAKE SURE YOU HAVE VOLTAGE AT THE SWITCH!

Jul 23, 2009 | 1992 Cadillac Eldorado

2 Answers

Turn signals dont work bulbs/fuses are good.


check to see if the emergency flashers work if they do its its either a wiring problem, bulb, or socket the bulb fits in. if it does not work than the flasher is the problem. it is located underdash on driver side in the kick panel( to left of the brake pedal) it is a blue or grey sguare relay looking plug. if it is factory flasher it will say flasher with the part # on it. it should also say toyota on it. good luck

Jul 09, 2009 | 2000 Toyota Camry

Not finding what you are looking for?
1999 Chevrolet Corvette Logo

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...