Question about 1988 Jeep Comanche

1 Answer

I have a 4.0 FI. 6 cylinders Auto 4X4 with 106,000 miles. I have replaced the fuel pump and when cold its starts wright up no problem at times after it has been driven and hot it will not start if I let it cool down it starts fine. It seems to be not getting gas what can you suggest is my problem? Paul R Curlett prc04@snip.net

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Check the gas components. your gas filter gas sensor. maybe its your fuek injectors. take to mechanic and have the fuel pressure checked. they will tel you quickly if its the problem

Posted on Jun 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Aireated fuel after cold soak


check for a loose fuel line hose/connection that is allowing the fuel to drain back over time and filling the line with air that is causing a air lock when trying to start

Apr 08, 2014 | Ford F-250 Cars & Trucks

2 Answers

I have a 1996 GMC Jimmy that was iddling very rough and code said cylinder 2 misfire check engine light was on solid. Replaced all plugs, wires, cap and fuel filter 1st of March 2013. It ran better for a...


Lets start at the beginning. Did anyone check fuel pressure before and after replacing the pump ?
Has anyone checked the fuel pressure regulator and the injector spider ? The 4.3w engine uses a spider with one injector that supplies all 6 cylinders. And it runs at 65psi or more.

Aug 05, 2013 | 1996 GMC Jimmy

1 Answer

Kia Sorento V-6 start-up difficulty


You probably should perform a fuel pressure test to see if the fuel pressure is bleeding off of the fuel rails when the engine is shut off. If it is, you could have a bad fuel pressure regulator or a bad check valve in the fuel pump module (which will require replacement of the module).

One way to test for this condition without any tools is like this:
cycle the key ON, wait about two seconds, then OFF, wait about 2 more seconds, and back ON again. Repeat his 3 or 4 times before turning the key to the CRANK position. If the engine starts immediately every time you do this, then the hard starting is definately caused by the fuel pressure bleeding off.

Apr 21, 2012 | 2011 Kia Sorento

1 Answer

My dodge dakota 6 cylinder auto hesitates when starting out - after that it drives fines. My mechanic has tried everything.


Not sure if that particular model has a cold start injector, but if it does, you might try replacing it. It gives extra fuel on a cold start. If extra fuel is supplied thru the computer itself, you won't have a cold start injector.

Oct 10, 2009 | 1992 Dodge Dakota

1 Answer

1991Chevy Lumina does not start


I didnt see it in your list, so I would suggest the O2 sensor, usally found on the exhuast pipe near the engine or on the back of the engine

Sep 21, 2009 | 1993 Chevrolet Lumina

1 Answer

Auto repair shop states that fule pump needs


If that problem with the gas guage is bothering you badly enough, then you will have to replace the fuel pump. The repair shop is on the up and up. The fuel level sending unit on the Mazda 6 is an integral part of the fuel pump assembly and is monitored by the computer. If the sending unit is defective then the entire pump assembly must be replaced, since the pump cannot be disassembled. Sorry about that, but I sure hope this helped ya!

Jul 21, 2009 | 2006 Mazda 6

1 Answer

1997 s-10 sames to get vapor lock. after filling up with gas,drove truck home (4miles} left sitting in drive way (hot sun) tried to start 4:pm. 9:pm 9:am removed gas cap started up first time. Aprox....


Change your fuel filter, it may have gone it's life time and is getting to dirty to let fuel flow properly. Your fuel pump to may be getting weak, if the fuel filter is dirty the pump works harder and heats up and could be over heating the fuel pump relay too. The fuel pump relay i believe is in the glove box behind a panel that say relay, there should be (3) in there and the middle one is the fuel pump's. switch then around after you change the fuel filter and if you get a chance, check your fuel pressure at the shredder valve. Good luck and hope this help's if there is a Auto Zone around you, you can ask to use the fuel pressure gauge to see what fuel pressure you have and they'll have the step by step instructions on how to do it and takes about 5 min to do and will have the fuel filter and step by step to replace that too. Keep me posted, be glad to help.

Jun 08, 2009 | 1997 Chevrolet S-10 Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...