Question about 2002 Mercury Mountaineer

1 Answer

2002 mountaineer power windows quit

Where is the fuse panel and which fuse is it,i checked the owners manual it does not list a fuse for windows

Posted by on

  • djslagle Jun 19, 2009

    ALL OF THE WINDOWS QUIT AT THE SAME TIME. NONE OF THE SWITCHE WILL WORK, CAN YOU TELL ME THE LOCATION NUMBER OF THE FUSE AND 60 AMP BREAKER,MANUAL DOEN,T LIST A POWER WINDOW FUE OR BREAKER. THANK YOU

  • Charlie May 11, 2010

    Did all of your power windows quit? Each individual power window motor is protected by a circuit breaker, not a fuse. However there are two fuses which will cause the power windows to ALL fail. One is a large 60 amp MaxiFuse located under the hood., in the battery junction box. This fuse should have power even with the ignition off (battery hot).
    The second possible fuse is a 15 amp fuse located in the Central Junction box. It controls the Accessory Delay relay, which supplies power to all the power windows. Another (unlikely) problem area would be the GEM (Generic Electronic Module) This unit completes the coil ground for the Accessory Delay relay. These don't go bad very often.
    Charlie


×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 279 Answers

It's a 60 amp FUSE, not a breaker. It's in the fuse box found under the hood. I think it's #6
The other 15 amp fuse is located in the under dash fuse box. I think it's # 17, but I'm not positive. The owners manual will show you where the fuse boxes are located.
Charlie

Posted on Jun 19, 2009

  • Charlie Jun 19, 2009

    The two fuses mentioned above control the accessory delay relay. This relay feeds power to the power window switches.
    Charlie


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 mercury mountaineer on e window not working


All the windows are on the same fuse, if the other windows are working fine, it's not a fuse issue. I susppect the motor or the window regulator.
With your ear close to the door panel, press the window switch up and down, if you hear the motor and grinding noises then the window regulator needs to be replaced, if you don't hear anything then the motor is bad OR no power is getting to the motor. either way you will have to take the door panel off and to fix.
HTH

Nov 23, 2011 | 2002 Mercury Mountaineer

1 Answer

Speedometer/ Fuel Gauge & Tachometer quit working....


It is obvious that one or more fuses are blown.Your owners manual will list the fuses. Also on the underside of the fuse panel cover the fuses will be listed. If you cannot find a list of the fuses then just check all the fuses and if one is blown replace it with the exact same size.

Sep 16, 2011 | 2002 Volkswagen Beetle Turbo S

3 Answers

2004 Mercury Mountaineer Power windows are not working. What could be the problem? The owners manual shows a large 30amp circuit breaker located under the hood. Could this be the problem?


they can go bad-swap it out with another that you don't need, just to try and see if it is the relay-listed are relays that might only control, for instance, the rear window defroster-generally, relays are all the same, some just get used heavily and some don't (i.e., ABS)-worth a try

Jan 27, 2011 | 2004 Mercury Mountaineer

1 Answer

Power Windows quit working on 2004 Mercury Mountaineer. Checked one fuse, and it is good. Manual shows 30 A Circuit Breaker, but not sure how to check, or if that could be problem.


fuses this size are usually under the hood on the drivers side fenderwell , black square box, possibly a hand type screw holding the cap on, not really a way to test these fuses other than to find one of a similar size in the fuse panel of a known working circuit and swap it with the power window fuse temporarily to see if they work

Jan 14, 2011 | 2004 Mercury Mountaineer

1 Answer

I looked at the owners manual for the fuse box under the hood that has the fuse for the Power Windows . According to the manual there isn't a relay in this box for the windows. Is it somewhere else ?


Check in the Power Distribution box, this is located in the engine compartment, and contains high-current fuses that protect your vehicle.

For POWER WINDOWS, check the position 4, 30AMP (Maxi Fuse) (also Power Moonroof, Power Seat).

1b9e6fb.gif

This and other details can find in your 2000 Mcercury Mountaineer Owners Manual.

Hope this help (remember comment and rated this).

Apr 01, 2010 | 2000 Mercury Mountaineer

1 Answer

2002 mountaineer power windows don't operate


If not in fuse panel at dash, try power distribution center/box under hood, usually near battery. Your owners manual should tell you, if you have it.

Apr 04, 2009 | 2002 Mercury Mountaineer

2 Answers

Need to know how to locate my fuse box on my 02 Mountaineer?


http://www.genuineservice.com/genuineservice/en/default?page=genuineService

Go to this site and pick owner guide on left task bar.Then input your vehicle info and pick get owner guide. Pick owner guide 2nd printing and fuse info begins on page 268

Apr 03, 2009 | 2002 Mercury Mountaineer

1 Answer

2002 mercury mountaineer power windows not working will not go up


read owners manual to locate pwr window fuse.or open up box and a label diagram should be on bottom of lid or door of fuse box. locate and pull.hold up to light to check or run continuity test.
if new fuse fixes prob, it is most likely going to happen again. then you'll need to isolate window that is problem.(last one used before fuse blows)go from there. GinoR

Mar 22, 2009 | 2002 Mercury Mountaineer

1 Answer

Power windows will not work what fusse do i check none listed in


owner manual will have a fuse chart.
go to central junction box and check fuse #17, 15 amp fuse.

check power distribution box maxi - fuse #6, 30 amp fuse. This box may be in engine compartment.

Dec 27, 2008 | 2002 Mercury Mountaineer

Not finding what you are looking for?
2002 Mercury Mountaineer Logo

1,012 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

fordexpert

Level 3 Expert

5516 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...