Question about 1994 Hyundai Excel

1 Answer

Changing front and rare break pads in hyundia excel

I am unsure how to change the break pads on my excel. could some please tell me how?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Hyundai Master
  • 545 Answers

This front::

  1. Raise and support vehicle, then remove wheel/tire assembly.
  2. Remove lower bolt and caliper assembly. Position assembly aside using suitable wire.
  3. Remove brake pads and shim.
  4. Bottom piston in caliper using suitable tool.
  5. Install new brake pads and attach shim to the outer pad. Tighten lower bolt to specifications.
this for rear::

1. Raise and support vehicle, then remove wheel/tire assembly.
  1. Remove axle nut, then the hub and drum assembly.
  2. Remove end shoe springs, cylinder and hold-down spring.
  3. Remove shoes and adjuster as an assembly.
  1. Reverse removal procedure to install, noting the following:
    1. Apply suitable grease to backing plate shoe contact surfaces.
    2. Install shoe hold-down pin, then assemble return spring with the pushrod shortened.
    3. Pull parking brake lever fully upward. Repeat process several times.

Posted on Jun 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Man truck front brakes siezed on


Hi I have a 2001 Man le 160c 7.5tonne recovery truck which has a similar problem as the truck is rarely used & every time I go to move it the front brakes seem to stick on but most times they free them selves when rocking the truck backwards & forwards but will need inspected before I drive it but unsure with commercial vehicles if they will just need a good clean with a power drill & wire brush & callipers pistons some oil ?? unsure if the callipers pistons screw in or just push in ,I have drove it for 2 miles & I could feel the front brakes were still hanging on , please advise

Mar 18, 2013 | Cars & Trucks

1 Answer

How to fix my front breaks?


Here watch this video

http://www.youtube.com/watch?v=kt2fvHlzv-4

Make sure you replace both your rotors & pads. Don't just replace one side.

Feb 07, 2012 | 1987 Buick Electra

1 Answer

How to remove front hub from 2003 hyundia accent


http://www.youtube.com/watch?v=Y8-Nn_SWbs0
Here is a you-tube video from a guy changing the axle in his '01 Elantra... I followed it to replace my axle, he has some excellent tips for removing the hub which should apply to your project I would think. There are two parts to the video. Good Luck!

Aug 14, 2011 | 2003 Hyundai Accent

1 Answer

My 2005 ford freestar has a high pitched "whistle"


I am having this same issue. I have changed my brakes and now I was going to change the front wheel bearing, but unsure to dump a lot of money out on an unsure fix.
Let me know if anyone has a fix?

Feb 20, 2011 | 2005 Ford Freestar

1 Answer

Bad shuddering through steering wheel and break pedal when breaking at speed on a hyundia excel 1998


firstly, your tyres may be out of balance, go to your local tyre shop and get them rebalanced .... if this doesn't solve your problem check your front wheel bearings .......... a: Make sure car is in P with handbrake on b: jack up on of your front wheels only about 1 inch off the ground c: grab hold of the top of the wheel with one hand and the bottom with the other and apply pressure simultaneously from each hand , taking notice of any excessive movement This will indicate if your bearing is loose , if it is loose then it will require repacking with grease and re tightening . Hope this helps Jason

Dec 08, 2010 | 1994 Hyundai Excel

1 Answer

Changing front break pads


Check the Service Manual about Jeep-KJ-Liberty-Secc-05-Brakes

I hope help you with this. (rated) Good luck.

Sep 21, 2009 | 2006 Jeep Liberty

1 Answer

Engine mount


The front mount is at the FRONT of the engine. Fair enough.

Jun 15, 2009 | 1994 Hyundai Excel

1 Answer

Changing brakes mits. monero spt. 4wd 2000


it is easy to change even you can change it your just going to take off the front wheel then you will see the break panel there's a bolt holding the break pad loose it so can pull the break pad out... or more or less even a driveway mechanic can do this for less cost...

Apr 30, 2009 | 2000 Mitsubishi Montero Sport

1 Answer

Front brakes make noise when applied after installing new pads.


it could be because they are dirty. also the noise could be the back brakes. if its a squeaking noise it could be that they are dirty or that they are cheep brake pads and for the first couple of weeks they squeak. also when you got your breaks changed did the break shop cut the rotors because that cleans them up and makes the rotors like new.

Apr 28, 2009 | 2003 Suzuki Grand Vitara

1 Answer

How to change the break pads on a 1989 mitsubishi galant?


just remove the wheels look on the back side of the brake calibers by the pads remove the 2 14 milimeter bolts that holds the calibers on then get a c clamp or a large pair of pliers to squeaz the piston back into the caliber remove old pads and reinstall all removed parts

Mar 23, 2009 | 1989 Mitsubishi Galant

Not finding what you are looking for?
1994 Hyundai Excel Logo

640 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...