Question about 2000 Pontiac Montana

1 Answer

PROBLEMS WHITH THE TRANSMISSION CONTROL SOLENIOD

I have to change the transmission control soleniod and i dont now wheare is going. i need to now wheare is locate to change.
thank you.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Pontiac Master
  • 545 Answers

===shift interlock solenoid--Inside the steering column near the ignition switch

===1-2 shift solenoid valve--Inside the automatic transaxle
to remove it :

  1. Remove the case side cover. Refer to Case Side Cover Replacement.
  2. Disconnect the transaxle wiring harness.
  3. Remove the 1-2 shift solenoid (315A).
2-3 shift solenoid valve--Inside the automatic transaxle
to remove it;
  1. Remove the case side cover. Refer to Case Side Cover Replacement.
  2. Disconnect the transaxle wiring harness.
  3. Remove the 2-3 shift solenoid (315B).
==the torque converter solenoid--inside tranny too

good luck,let me know

Posted on Jun 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

06 Durango 545 RFE Transmission with P0700 tcm fault and P0750 LR Soleniod


The ECM controls the shift solenoid so if its bad its going to throw crazy codes.

Feb 09, 2013 | Cars & Trucks

1 Answer

Transmission slipping


This is common on your car. You have a HydroMatic 4T65E trans. You will need the Pressure Control Soleniod Valve Assembly change in your trans. It is tetious work so you may need to take it to the shop for repairs.

Nov 26, 2012 | 2002 Chevrolet Monte Carlo

1 Answer

Location diagram transmission shift soleniod & photo of soleniod.The car stays in first gear to long before it changes.Could this be the problem.


We do not have diagrams of this setup, but the shift solenoids are all one piece or rack of solenoids you could say, they are located inside the transmission attached to the valve body of the transmission, to access them you must remove the pan on the bottom of the automatic transmission.

Jun 27, 2011 | 1998 Ford Contour

1 Answer

1998 gmc safari 4.3l automatic transmission code po753 shift solenoid a.what are the symtoms if soleniod is actually defective and is the soleniod attached to the valve body.


Yes the Solenoid is attached to the valve body and if you got a defective one that means you will be having problems and delays with shifting and you might lose one of the gears like 4th or 3rd .

Dec 14, 2010 | 1999 Chevrolet Blazer

2 Answers

P0753 car want go into ovr drive and has high rpm


This code means theres a problem with the shift soleniod for the 3-4 shift, have this soleniod tested,its locted on the valvebody if the pan was dropped you will see the soleniod.

Oct 04, 2010 | 2000 Dodge Durango

1 Answer

My 97 lincoln Continental go's forward just fine. I can feel the transmission shift into reverse but will not move. If I give it the gas the engine speed stops at about 1500 rpm


The TCM or transmission control module may be bad or a stuck trans. shift soleniod. It may be worth it just to take it to a certified transmission shop to have them run a diagnostic check to retrieve the TCM's trouble codes then go from there.

Jun 23, 2010 | 1997 Lincoln Continental

1 Answer

I have a 2002 Regal. I'm having shifting problems with the automatic transmission. It doesn't want to shift. It does not seem to be slipping as much as not knowing when to shift. I changed the oil filter...


I have a similar problem with my 2002 Regal, mine wont shift out of park. I hear a switch clicking under the steering column cover when I depress the shifter button when I try to take it out of park. Have you found a solution yet? Larry

Jun 20, 2010 | 2003 Buick Regal

1 Answer

Transmission shift soleniod


inside the transmission oil pan

Feb 26, 2010 | 1992 Mercury Sable

1 Answer

My van as I was driving just stopped shifting into gear. It never made any noise, nothing just all of a sudden stopped shifting.


The trasnmission soleniod assembly or the transmission control module is out.

You need to go to the local transmission shop
I would have the system scan for code and check out.

Good Luck

Aug 16, 2009 | Chrysler Town and Country Cars & Trucks

Not finding what you are looking for?
2000 Pontiac Montana Logo

1,411 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...