Question about 2003 Dodge Ram Maxi

1 Answer

I need a used or new tailgate latch for my 2004 ram pickupo truck .. cant find it either, please respond to idnimport@gmail.com if you have it ??? thanks, leo ps : I'm in delray beach, south florida.....

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Dodge Master
  • 545 Answers

Check e-bay

Posted on Jun 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tailgate side latch spring is broken. need new


check rockauto.com or autopartswarehouse.com

Oct 25, 2012 | 2005 Dodge Ram 1500

2 Answers

Tailgate open/ lock latch in closed position so tailgate will not close/ can't et lock latch to open so I can close tailgate completely


Annoying, but easy to fix: Actuate the opening handle and manually rotate the latch to the open position.

Feb 27, 2011 | 2004 Chrysler Pacifica

1 Answer

2004 avalanche tailgate lock will not unlock and the tailgate is up without access to the inside. The lock turns to the unlock position but does not unlock.


The lock mechanism is likely bent because the latch has become rusted or plugged with dirt. Lift the handle and spray lots of WD40 in the centre of the lock mechanism (under the fibreglass piece). You will need to manually open the lock with a long screwdriver. Look to the right of the latch mechanism you will see something that looks like a C. Use the screwdriver to lift that piece up. That should unlock it so that you can open the tailgate. When it's open, you'll have to use a torx screwdriver to unscrew the outside two torx bolts and then remove the plastic bevel which surrounds the latch handle. There will also be two plastic pins holding the bevel onto the tailgate. You may have to gently pry those pins loose with a screwdriver. When the bevel is off, the lock will come with it. Check the lock to see that the little metal lever is at a straight right angle. If it is bent you will have to straighten it with pliers and then reattach the bevel. If the metal lever is broken, you will need a new lock.

Jun 27, 2010 | 2004 Chevrolet Avalanche

1 Answer

2004 Avalanche: how to replace tail gate latch 2003 1500 chev...


Use torx screwdriver to remove the two smaller outside torx bolts inside the tailgate. This will free the bevel around the latch handle. There are also two plastic pins that need to be pried out before the bevel comes completely free. Then remove the three larger torx bolts from inside the tailgate that hold the latch assembly in. When it is loose, use a screwdriver to open the blue/green plastic clips and free them from the threaded rods (right and left). Then use a screwdriver and some muscle to pry the fibre glass piece out enough so that you can pull the entire latch mechanism up and out from behind the fibreglass. It is a real tight fit so don't give up on it. Install the new latch mechanism and repeat all steps backwards. When the latch is in place with the two plastic clips attached to the threaded rods and the three torx screws are holding it firmly, you will have to use a needle nose pliers to reattach the wire spring to the top of the latch so that the latch mechanism resets. Test it before reinstalling the bevel.

May 17, 2010 | 2004 Chevrolet Avalanche

1 Answer

Need to replace a tailgate handle on a 2003


I had the same problem. I used a flat screwdriver to pry the fiberglass piece out which created just enough room to wiggle the latch mechanism out the top. Getting the new latch in was a little more difficult, but 5 minutes of prying and wiggling and I got that in the same way it came out.

Apr 17, 2010 | 2004 Chevrolet Avalanche

2 Answers

2004 GMC Envoy XUV tailgate won't open downward. Tailgate will swing open but will not open downward. Nothing happens when pressing in on pressure pad/switch...it is as if there's no power going to it.


Do you live in a dusty area? My sister lives in dusty New Mexico and had a malfunctioning XUV tailgate. My reasoning was that something must tell the tailgate not to drop down if the glass is up, and if it can't tell, then it will only open sideways.
So we removed the trim panel, and the tailgate was indeed full of dust. By reaching my arm in, I found two plastic optical sensors which tell the gate whether the glass is up or down; both were coated with dust. After cleaning these the tailgate was back to its normal operation. The two sensors are flat, round - about the size of a nickel or dime...I couldn't see them, just found them by guessing that they must be there. Hope this helps!

Apr 01, 2010 | 2004 GMC Envoy

1 Answer

How to remove a tailgate of a 2005 dodge ram


· Open the tailgate and remove the tailgate liner.
· Remove the ten bolts(5) that secure the tailgate cover(4) to the inside of the tailgate and remove the cover.
· Using a pencil,mark the actuator rod(3) at the control(2) for the latch(1) being serviced.
· Disconnect the actuator rod from the control
· Remove the two bolts(7 and 8) that secure the latch(5) to the tailgate(4) and position the tailgate check cable(6) out of the way.
· Remove the latch and actuator rod from the tailgate as an assembly.
· If required,remove the actuator rod from the latch.
You will have to remove the tailgate cover. The cover will most likely be held on by some of the tailgate metal access cover.

Oct 06, 2009 | 2005 Dodge Ram

1 Answer

1998 dodge ram 1500 need to open up the tailgate


not sure what you mean by "sealed unit". if your problem is that your tailgate wont latch together properly, check the condition of the tailgate cables and look for damage to the outer covering and cable itself. it could be that the cable is getting caught b/w gate and bed when you close it. due to a misalignment. yes, i would lubricate the mechanisms with wd40, or a quality graphite lubricant. i would also access the internal mechanisms that actuate the tailgate opening. lubricate those parts too. finally make sure that the cable's tang is slid past on the bolt. this should fix your issues.

Feb 13, 2009 | 1999 Dodge Ram

7 Answers

2004 envoy xuv tailgate problems, will not latch or open sideways.


the actuators have a white stem that sticks out of the bottom of them. if you push up on the ones on the driver side it will open the back hatch for you.

Jun 30, 2008 | 2004 GMC Envoy

Not finding what you are looking for?
2003 Dodge Ram Maxi Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...