Question about 2000 Daewoo Nubira

1 Answer

I have Nubira 2000, I changed the brake pads but even though no use the brake effeciency is very less.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Daewoo Master
  • 450 Answers

After fitting new brake pads you must "bed them in"
by doing a few high speed brake applications of medium to hard brake applications
say 80 km/h hit the brakes down to 40km/h giving a pause in between to let brakes cool down again
if pedal feels spongy or you have to pump pedal up to get a high brake pedal you might have air in brake lines
you should allways bleed brakes after replacement incase of air ingress into system

Posted on Jun 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake pad fault light


The light may come on at a certain amount of miles,call Dealer,ask for parts and they will tell you.

Sep 10, 2012 | 2002 BMW 3 Series

2 Answers

I changed my rear brake pads one weea ago i have just descuvered to day that i have no brake lights working , can u help me


Hi!

Changing the brake pad has nothing to do with the brake light unless you touched the switch thats under your brake pedal. Or you might have a burnt light bulbs. Good luck

Jul 03, 2011 | 2002 Daewoo Nubira

1 Answer

Both my brake lights are out on my nubira, where can i follow the electrical wiring to find the short? thanks


same build as the opel astra ,which was a great vehicle ,right never mind looking for a short just change the brake light switch

Aug 27, 2010 | 2000 Daewoo Nubira

1 Answer

Need to find e-brake part not listed in parts book from dealer


Stop by any auto parts store bring the part and a picture if necessary to show them where it came from they can help you there easier and then they can show you the part to compare if necessary good luck
 

Mar 23, 2010 | 2000 Daewoo Nubira

1 Answer

How to change front brake pads


remove wheel, remove 2 large bolts holding brake caliper on,do not let brake caliper hang by the brake line. push brake caliper piston in with c clamp or piston tool. replace pads, reassemble brake caliper.
while brake caliper is off check disc rotor for wear.

Sep 08, 2009 | 1999 Daewoo Nubira

1 Answer

Nubira 2000 user manual pdf manual (english)


try this link to manual even though its 2004 manual is basically same just they updated info and put all paper based books into electronic form.(this link works !!)

http://www.onlinefreeebooks.net/automotive-machinery-power-equipment-ebooks/daewoo/daewoo-nubira-lacetti-service-manual-my2004-transaxle-drive-axle-pdf.html

Jun 06, 2009 | 2000 Daewoo Nubira

1 Answer

Changing brakes mits. monero spt. 4wd 2000


it is easy to change even you can change it your just going to take off the front wheel then you will see the break panel there's a bolt holding the break pad loose it so can pull the break pad out... or more or less even a driveway mechanic can do this for less cost...

Apr 30, 2009 | 2000 Mitsubishi Montero Sport

2 Answers

2000 daewoo nubira brake light problem.


could be a brake switch problem or a fuse .

check the fuse for continuity and check the brake light switch if there is continuity also when you step on the pedal.

tnx 4 using fixya,


drcool

Oct 07, 2008 | 2000 Daewoo Nubira

1 Answer

Brake pad change for 99 daewoo nubira cdx


I also have a 99 nubira, you should be able to do it with out a book...............they have disc all round and the general set up is the same front and back, If i remember rightly, wheel off, unbolt caliper from mount ( 2 bolts on back face ) pads simply pull off from bottom of mount, refit new pads ensuring same shape on as one that came off. open bonnet and take off cap to brake fluid, using suitable tool ( i used a large screw driver ) push both pistons back into rubber gaitor ( keeping a eye on level in brake fluid, as it will possibly overflow ). You should then be able to refit caliper back to mount. refit bolts, mop up any overflow and replace cap.........JOB DONE :) ........................remember, before you go out onto the road start the car and pump the foot brake a few times until the pedal goes firm again.

Hope this helps you. steve

Jun 19, 2008 | 1999 Daewoo Nubira

Not finding what you are looking for?
2000 Daewoo Nubira Logo

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...