Question about 1991 Toyota Pickup

1 Answer

I have a 1991 Toyota truck (extended cab). Both door windows are difficult to roll up and down and it seems the window track weatherstipping has torn and sections have become doubled in the tracks. Is this weatherstripping part of the regulator assembly or available separately? Dealer item or aftermarket? Difficult to replace? Thanks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

You have to take the door panel off and oil the tack on the regulator

Posted on Jun 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my passenger door window slipping when rolling up or down?


Broken clips that hold the window to track, damaged lift mechanism

Oct 01, 2015 | 1991 Ford Explorer

1 Answer

Pass Window Wont Roll Up, But it rolled down, and if you lift it up, then hit button to go down, it rolls down... drivers window rolls down, then you have to play with the switch to get it up again, s


Qsmoma:

If the window closes when you play with the switch, the switch is probably ok. The window may have jumped out of the track or the track is damaged. Pull the inside door trim and check the track and mechanical arms that extend from the bottom frame of the window.

Nov 22, 2014 | Cars & Trucks

2 Answers

Driver side window came off track


it is not off track. the grinding or metal scratching noise is from the window regulator cable that has broke off from the plastic idler pulley on regulator and is now wound up on the motor. you need a new window regulator.

Aug 31, 2014 | 2007 Toyota Avalon

1 Answer

Toyota 1995 truck window falls out of the track


try adjusting the felt channels that the window runs in as it goes up and down
put it right up and loosen off the channel adjuster at the bottom
lower the window down slowly and keep the channel tight against the glass edge
tighten the channel bolt

Apr 19, 2017 | 1995 Toyota Pickup

1 Answer

My driver side window is off track or something cause I rolled ot down to hard .


Pop the door panel off and you will be able to put the window back on track.

Mar 29, 2011 | 1991 Jeep Wrangler

1 Answer

The rear passenger side window seems to be coming off at the front side. I can tell if the rubber is torn or if it just need to be pushed back together.


sounds like the track has been dismounted....try to pull off the inside door panel and look for any missing or broken bolts on the track itself... the track protrudes down to keep the window on track....if this is not a problem look at the glass itself...roll the window down a little to see the bottom of the glass. makes sure all of the mounting brackets are in place and secure..

Aug 12, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

Driver's window won't roll up all the way


If you have power windows it should be a broken cable, If its manual then it should be the crank asm. or the white plastic trac, it may torn at the end.

Apr 24, 2009 | 2002 Pontiac Grand Am

1 Answer

Power windows roll down slowly


You can try a dry lube or lithium grease on the slow ones, but it sounds more like you need new window motors. Unfortunately Saturns are plastic cars, and... The window motors are not too difficult to change and it requires removing the outer door panel to make it easier to access.

Mar 19, 2009 | 1997 Saturn SL

1 Answer

Power Window in a 2001 GMC Sierra Extended Cab


i just changed my unit on drivers side door man it was a pain well first it started off with not going at all i thought it was the motor but motor was good the wire was just getting hung up because the plastic piece broke on the track,so first disconnect motor from track and hit switch to see if it turns,and if not then replace motor,be careful not to loosen the cable.you almost need it exact tension for the track to work right.   

Sep 14, 2008 | 2001 GMC Sierra Crew Cab

Not finding what you are looking for?
1991 Toyota Pickup Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...