Question about 1999 Chevrolet Silverado 1500

2 Answers

On my 1999 chevy silverado the only gauges that work are the oil pressure gauge and the temperature gauge. nothing else is working cot even the speedometer or the RPM gauge.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Replace 10 amp radio fuse under hood it will work unless you have radio working i blew my radio fuse touched wrong hot and it blew my speedo and rpm gauge

Posted on Jul 07, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 149 Answers

The stepping motors in the gauges go bad. Do a search on ebay for CHEVY SILVERADO INSTRUMENT CLUSTER for cheaper repair options, dealer costs $300.00

Posted on Feb 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My oil gauge for my 2006 Chevy silverado v8, 2wd does not work. It reads 0 pressure and stays until at a stop and radically jumps.


Sounds like you need to replace the oil pressure sending unit. Should be located on the engine down by the oil filter.

Apr 21, 2013 | Cars & Trucks

1 Answer

2005 Chevy silverado oil pressure guage is on zero , oil level is fine, changed sending unit with no result,


check the filter,, if its bad enough your oil won't pass through it, making it look like your oil is full, but its not moving, Chevy's have whats known as a stepper motor also on the oil gauge,, whats bad about that is if thats gone bad, you have to replace the whole gauge cluster which last time I checked is 250.00

Jul 19, 2011 | 2005 Chevrolet Silverado

2 Answers

I have a 2006 chevy silverado 5.3L..When in idle oil pressure gauge goes to 80 and when i accelerate ail pressure goes to zero ...is it the oil sending unit?


It could be the sending unit. If the truck is low on oil it will cause something similar. Be sure the oil level is topped up. The only way to be sure it so measure the actual oil pressure at the engine with a proper gauge..

May 07, 2011 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

Why won't the oil and temperature gauge work on


you should switch the temperature sensor and oil pressure sensor you had on your first engine,because your new engine must come with the light indicator dashboard so the sensor of your new engine are not compatible with your gauges....lipak!...

May 05, 2010 | 1988 Ford Ranger

2 Answers

I have an 04 chevy silverado v6.3, and my dash doesnt work none of the gauges speedometer, fuel, nothing works, but they did yesterday. What could this possibly be?


The stepping motors in the gauge go bad, but uusually they fail gradually, or just one, The dealer charges $300 to fix, do a search on ebay for CHEVY SILVERADO INSTRUMENT CLUSTER for cheaper repair options. gauges are powered by the pcm, no fuses inbetween, so if it runs ok, problem is in cluster

Nov 07, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

My check oil pressure gauge came on. It was time


The 'check oil pressure' gauge indicates less than 5psi of oil pressure. This usually indicates either a oil pump pick-up screen is plugged up or the crank bearings are worn to the point that oil flow is not being restricted. Both require the removal of the oil pan to check for the problem.

Nov 02, 2009 | 1999 Chevrolet Silverado 1500

3 Answers

Oil pressure on a 2004 5.3 liter silverado at idle is around 20


The pressure to be most concerned with is the reading in gear at idle with engine warmed up...Low end really should not be below 20. If pressure wanders, change the sending unit and check actual pressure with a mechanical gauge if necessary. The age and quality of your oil, as well as temperature all play a part in pressure, as well as internal wear from time & miles of use. If pressure changes with rpm, that is normal. 40psi is good while driving.
need more info just ask.

Apr 27, 2009 | 2004 Chevrolet Silverado

2 Answers

Changed oil pressure switch,still no oil pressure


The fuel pump on that model runs through the oil pressure switch so that if the truck looses oil pressure,It kills power to the fuel pump to prevent engine damage.you need to find the cause of the low oil pressure reading(possibly a bad oil switch).That would be the cheapest place to start,or have it checked with a mechanical gauge.Good luck,
ChevRev

Mar 30, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

In cold weather I get no oil pressure from the gauge,


You can Purchase a Built in Block Warmer for your Truck.

Jan 15, 2009 | 2005 Chevrolet Silverado 1500HD

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

2,712 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...