Question about 2000 Pontiac Grand Am GT

1 Answer

After clicking on the hazard lights, the turn signal buzzer continues to buzz even with the turn signals off.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Pontiac Master
  • 3,854 Answers

The turn signal flasher is a part of the hazard flasher and needs to be replaced. If you go to Auto Zone, the part is cheaper then the dealer and Auto Zone will have the step by step instructions to replace the hazer and turn signal module. Good luck and hope this helps.

Posted on Jun 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the emergency flasher relay located on 2013 Rogue?


Here is what the service manual says. Looks like it is not a flasher relay but a function of the body control module.

TURN SIGNAL AND HAZARD WARNING LAMP SYSTEMSystem Description OUTLINE Turn signal lamp and the hazard warning lamp is controlled by combination switch reading function and the flasher control function of BCM.
TURN SIGNAL LAMP OPERATION - BCM detects the combination switch condition by the combination switch reading function. - BCM supplies voltage to the right (left) turn signal lamp circuit when the ignition switch is turned ON and the turn signal switch is in the right (left) position. BCM blinks the turn signal lamp.
HAZARD WARNING LAMP OPERATION BCM supplies voltage to both turn signal lamp circuit when the hazard switch is turned ON. BCM blinks the hazard warning lamp.
TURN SIGNAL INDICATOR LAMP AND TURN SIGNAL SOUND OPERATION - BCM transmits the turn indicator signal to the combination meter with CAN communication while the turn signal lamp and the hazard warning lamp are operating. - Combination meter outputs the turn signal sound with the integrated buzzer while blinking the turn signal indicator lamp according to the turn indicator signal.
HIGH FLASHER OPERATION (FAIL-SAFE) - BCM detects the turn signal lamp circuit status by the terminal current value. - BCM increases the turn signal lamp blinking speed if the bulb or harness open is detected with the turn signal lamp operating. NOTE: The blinking speed is normal while operating the hazard warning lamp.

Oct 13, 2014 | 2013 Nissan Rogue

1 Answer

The flasher unit (turn signal and hazard) starts the clicking sound as soon as the ignition key is turned on.


sounds to me the switch is bad, as if its stuck in the turn signal position, could be the relay or blinker faulty. Replace the blinker/relay and if thats all good, its your turn signal switch.

Dec 16, 2013 | 2003 Hyundai Tiburon

1 Answer

Turn signals buzzing?


check your relay for flasher

Nov 07, 2013 | 1998 Audi A4

1 Answer

2005 Impala, directional signals inoperative. Flashers are working. Replaced the hazard warning switch. Still no directional signals, hazards work. Now, car will not start.Buzzing sound from hazard sw


There is a good possibility that the hazard warning and directional signal lights have nothing to do with the starting or operation of the engine. There are many things that might cause the car to fail to start. The battery must be fully charged, and in good working condition. No corrosion on the terminals. good solid connections. When you turn the key the starter motor should turn the engine over. If that works the carburetor will need gas. If you have gas and spark, the engine should run. Hope that helps.
Turn signals work with the tail lights and parking lights on the front. You should turn on the Head lights and check to see if the tail lights and parking lights come on. You will also want to check to see if the flasher is plugged in. All the light bulbs must be plugged in and working to operate the flasher for the turn signals. good luck

Oct 10, 2017 | 2005 Chevrolet Impala

1 Answer

2002 Cabrio... Where can I get a relay board?


Some manufactuers use a buzzer sound when you leave the keys in the ignition and car shut off. Some use a buzzer for a seatbelt that is not fastened when it detects a passenger.

The use of the turn signal or Hazard could break the circuit and silence the buzzer.

Jun 04, 2012 | 2002 Volkswagen Cabrio

1 Answer

Is the hazards relay used part of turn signal?


The hazard switch is also the device that supplies the turn signal "flash". If you continue to hear the noise of the turn signal flashing when the turn signals off than the problem is the turn signal switch. It is grounding The purple wire from the hazard switch which makes the hazard switch think the turn signal is on. The fix for this is to relace the turn signal/multi-function switch. Typically they will start to go bad in stages. Your symptom is the first stage. Eventually either the turn signals or the brake lights will also sto working. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 10, 2012 | 2000 Oldsmobile Alero

1 Answer

No turn signal, hazard lights, drl


The problem is most likely the turn signal switch located in the steering column, tough to replace without the proper experience and specialized tools. The air bag and steering wheel need to be removed to replace the switch.

Aug 02, 2009 | 1997 Dodge Caravan

1 Answer

Turn signal relay keeps clicking on and off


Replace the hazard warning light switch. Pretty common problem on GM vehicles

Jul 20, 2017 | 1998 Chevrolet Blazer

1 Answer

1998 Dodge Ram 1500 4WD blowing fuse when turning left signal on


left side u got a short
u can wire up a buzzer or light to plug into where the fuse goes that blows when u turn on ur left blinker the buzzer will sound or the light will come on ,while the buzzer is on take apart left signals
and check wiring by moving harness around ,when u find the short the buzzer will quit

Jan 21, 2009 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
2000 Pontiac Grand Am GT Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...