Question about 1991 Oldsmobile Ninety Eight Regency

2 Answers

1991 Olds 98 regency elite not start

I have the same problem. I went to work one night, drove there just like I always do and then when I came out the car would not start. It did not click or make any sound whatso ever when I turned the key. We tried jumping it and nothing, all my lights still worked so I was pretty sure it wasn't the battery. It gets fuel, my dad is a mechanic and has found no bad wires or fuses.
The car will turn over if he jump starts it but will not stay running. Would appreciate any help out there.

Posted by on

  • brendagamble
    brendagamble Jul 06, 2013

    my car will start and run as long as you keep your foot on the gas, we have changed in line fuel filter and crank censor but is still doing the same thing

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 2 Answers

We have only had our 1991 oldsmobile 98 regency elite for a month and it was running good, my husband spliced the battery cable ends from a side post to a top post battery and it started acting up since then we've replaced in line fuel filter and crank censor only to have it still doing the same thing, can anyone help me plz

Posted on Jul 06, 2013

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Iv'e had the same problem. mine was the starter wire had a split in the wire under the plastic. i cut wire and wired it directly to the bolt.

Posted on Sep 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Olds 98 Regency Elite I'm re-attaching rear


there is a small set screw in the base of the mirror you will need to loosen this and then slide the metal plate out.

Aug 30, 2010 | 1995 Oldsmobile Ninety Eight Regency

1 Answer

How to replace 1991 olds regency 98 elite crankshaft sensor?


Remove the crankshaft pulley,the harmonic balance,with a puller made for this,then you can replace the sensor,and align it,if it is not aligned,it will break it.

Aug 22, 2010 | 1991 Oldsmobile Ninety Eight Regency

3 Answers

I have a 1990 oldsmobile 98 and every day i have to get a boost to start it. what's the problem


it is the automatic load leveler that pumps air into the back shocks to level the car so it rides better when there are lots of people or weight in it. it is in the frontof the car opposite the battery, just disconnect it. had the same problem on my 1990 olds 98.

Aug 21, 2010 | 1988 Oldsmobile Regency

1 Answer

91 Olds 98 Regency elite once in a while the car doesn't start. The starter fires but the engine doesn't turn on. If i wait 10 minutes or so, it starts.


Based on the information you have given to this point, I am just going to give you a few possiblities. Have you had a tune up done recently? Air filter been checked or changed? I am not in any way trying to sound sarcastic so I apologize if I come off that way.Those would be my first things to inspect if I were ask to look at your car. I would also check fuel pressure and inspect the fuel pressure regulator.I would consider these things and go from there. I Hope this helps you but please let me know if you need more information on what to do next but I may need some more information at that time also .

Nov 11, 2009 | 1991 Oldsmobile Ninety Eight Regency

2 Answers

Fuse box diagram for 1990 olds 98 i want to cut


Review this Wiring Schematic about Olds 98 ('89, '90 & '91):
1989 1
1989 2

1990 1
1990 2

1991 1
1991 2

I really hope help you with this (remember rated this help). Good luck.

Oct 21, 2009 | 1991 Oldsmobile Ninety Eight Regency

3 Answers

1991 oldsmobile 98 fuel filter replacement location?


my fuel filter is located right behind the pass side tire on the inner side of the frame.

May 03, 2009 | 1991 Oldsmobile Ninety Eight Regency

1 Answer

1991 olds 98 regncy elite blower motor not working


There is a fusible link for the blower motor. Check that. Don't know where it is. Look up the wiring diagram at autozone.com. Also check the fuse in the fuse box. Could just be that.

Feb 24, 2009 | 1991 Oldsmobile Ninety Eight Regency

Not finding what you are looking for?
Cars & Trucks Logo

397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...