Question about 1993 Jeep Cherokee Country

1 Answer

I have a 2000 wrangler did a front brake job on it (new rotors new pads) all back together fine then when i went to test drive jeep won't move acts like parking brake on. thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Try jacking up the front of your jeep and see if you can turn the front wheels by hand. If you can the do the same thing to the back. If you can't turn the front tires then you might have a brake caliper that needs to be replaced.

Posted on Jun 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ford Taurus caliper sticking


If the caliper is ok, and the pads do not release, I would try the flex hose next.

Sep 01, 2012 | 2000 Ford Taurus

2 Answers

Replaced front brake pads, tried to test drive the van and it won't mve. Replaced the left front caliper and rotor still won't move, whats wrong?


how hard was it to install the new pads in the caliper over the rotors,if it was a very tight fit then you may have the incorrect pads for the application.you replaced only the left side caliper but don`t say why only that one.the right caliper could be hanging up,or did the brake flex hose get twisted when you put things back together this can cause the brakes to stay on as the fluid won`t be allowed to return allowing the caliper to go to its rest position unlocking the brakes.

Apr 14, 2011 | 1999 Dodge Caravan

2 Answers

With just over 50,000 miles on my 2008 Jeep Wrangler (mostly all highway) Both of my rear pads and rotors need to be replaced.. Does anyone know if this is normal? My front pads and rotors are...


The front brakes are good at 30000 mile intervals ,because they do most of the stopping power. 50 to 60000 miles is about normal on the rear brakes. The most common ailment with rear brakes is the emergency brake not releasing. The cables for the emergency brake run under the jeep ,along the frame and rust keeps them from releasing

Mar 07, 2011 | 2008 Jeep Wrangler

1 Answer

Front brakes on a 2005 Jeep Rubicon


Once you take the caliper bracket off, the rotor should just fall off. If the Jeep stops without any vibrations I would leave the rotors alone., unless they are scored badly from brake pads worn out and metal to metal.

Mar 19, 2010 | 2005 Jeep Wrangler

1 Answer

Need to replace front rotors and brake pads


All you have to do is take off your calipers and the rotor will slide right off. Use a C clamp to push the piston of the caliper back in so you can put your new brakes on.

May 08, 2009 | 1994 Jeep Wrangler

2 Answers

Changed front brake pads. brake pedal goes to floor. no brakes


Something doesn't sound right, you shouldn't have to remove the brake line to install pads. Did you have to do this on both sides? Do the new pads and the old pads look the same? Did you get the caliper on crooked? Just recheck your work first before replacing more parts. When you install the caliper, You have to hook the pad on one side first before you slide it over the rotor.

Mar 26, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Jeep wrangler stalls out


check maf and tps sensor

Feb 18, 2009 | 1988 Jeep Wrangler

1 Answer

Unusual brake wear


The two different styles/designs may be part of your ware problem, they may not be made of the same material and maybe warring fastest but I fear that you could have a caliper hanging up. I would go head and install the new bushings in that caliper, so you know they are good and not sticking, with the rest of the brakes all put back together. Press your brake pedal down hard with the rear wheels jack up on stands. Place the shifter in neutral see if you can turn both back wheels fairly easily, the left rear maybe sticking or hanging up. If you don’t find anything, try driving it till you feel it pulling again. Come back and jack it back up, check it again it may have to get hot to act up. If it is hanging up it probable would will not be hard to fine the wheel that is hanging up will be hard to turn. You will feel the drag on it and you may hear it on the rotor. When you release the brake pedal the pads should return far enough to create a little space between the pad and the rotors letting it turn freely.

Nov 28, 2008 | 2000 Chevrolet Silverado

1 Answer

Replace brake pads and rotor on Lincoln LS 2000 front wheels.


new rotors and new brake pads ...
...full job would include loaded calipers with all new hardware ..if you pay attention to disassembly you will not need a service manual necessarly..all is logical and straightforward...but you are dealing with safety so be sure you are good before taking a drive ...good luck

Nov 10, 2008 | 2000 Lincoln LS

2 Answers

96 Ranger Grinding Sound Moving Forward


Did you check the rotors to see if they were cracked or 'thin' ? Rotors sometimes get really thin with use.And they can crack. Or as in one case that I know of there was sand between the rotor and the pads. The pads were also new. Removed the gravelly sand and they worked fine.

Nov 05, 2008 | 1996 Ford Ranger SuperCab

Not finding what you are looking for?
1993 Jeep Cherokee Country Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...